MAX485CPA+ vs SP485E तुलना
विस्तृत दोनों ओर की तुलना MAX485CPA+ द्वारा Analog Devices और SP485E द्वारा MaxLinear. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX485CPA+ - Low-Power RS-485/RS-422 Transceiver | Analog Devices
MAX485CPA+ ✓ सक्रियMaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ सक्रियविशेषता तुलना
| पैरामीटर | MAX485CPA+ | SP485E |
|---|---|---|
| ब्रांड | Analog Devices | MaxLinear |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | RS-485/RS-422 low-power transceiver | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Communication Mode | Half-duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| Signal Type | Differential | — |
| Slew Rate | Slew-rate-limited | — |
| पैकेज | 8-pin PDIP | 8-pin NSOIC or PDIP |
| माउंटिंग प्रकार | Through-hole | Surface Mount (NSOIC) or Through-Hole (PDIP) |
| सप्लाई वोल्टेज | [DATA_NEEDED: supply voltage] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | 12 kΩ minimum, 15 kΩ typical |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature] |
| RoHS स्थिति | unknown | Compliant |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | unknown | — |
| Lead-Free Status | unknown | — |
| फ़ंक्शन | — | Transceiver |
| Protocol | — | RS-485, RS-422 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-duplex |
| डेटा दर | — | 2.5 Mbps (max, SP485E non-slew-limited) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Receiver Input Sensitivity | — | ±200 mV |
| Common-Mode Range | — | −7 V to +12 V |
| ESD Protection (HBM) | — | ±15 kV |
| ESD Protection (IEC 61000-4-2 Air Discharge) | — | ±15 kV |
| Process Technology | — | BiCMOS |
| Failsafe Receiver | — | Yes (open, shorted, idle bus) |
| Tri-State Enable Pins | — | Yes (DE, RE) |