MAX485EESA+ vs ADM489AR तुलना
विस्तृत दोनों ओर की तुलना MAX485EESA+ द्वारा Analog Devices और ADM489AR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | MAX485EESA+ | ADM489AR |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Product Type | RS-485/RS-422 Transceiver | Full-duplex differential line transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| डेटा दर | Up to 2.5 Mbps | 250 kbps |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C | [DATA_NEEDED: Operating temperature range] |
| पैकेज / केस | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| MSL स्तर | 1 (Unlimited) | — |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Bus Common-Mode Range | — | -12 V to +12 V |
| Minimum Input Impedance | — | 12 kΩ |
| EFT Protection | — | 2 kV |
| EFT Compliance | — | IEC 1000-4-4 |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Duplex Mode | — | Full duplex |
| Slew Rate | — | Slew-rate limited |
| पैकेज | — | 14-pin SOIC, 3.90 mm width |
| लाइफसाइकिल स्थिति | — | Obsolete |
| RoHS स्थिति | — | [DATA_NEEDED: RoHS compliance] |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| Lead-Free Status | — | [DATA_NEEDED: Lead-free status] |