MAX485ESA+ vs MAX485CSA+ तुलना
विस्तृत दोनों ओर की तुलना MAX485ESA+ द्वारा Analog Devices और MAX485CSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MAX485ESA+ | MAX485CSA+ |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| सप्लाई वोल्टेज | 4.75 V to 5.25 V (5 V nominal) | [DATA_NEEDED: supply voltage range] |
| डेटा दर | 2.5 Mbps | — |
| Supply Current (unloaded) | 120 µA to 500 µA | — |
| Receiver Hysteresis | 70 mV (typ) | — |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold (V_TH) | -0.2 V min / +0.2 V max | — |
| ESD Protection (HBM, driver output) | ±15 kV (per datasheet) | — |
| Unit Load | 1/8 (up to 256 transceivers on bus) | — |
| ऑपरेटिंग तापमान | -40 °C to +85 °C | — |
| पैकेज | 8-SOIC (SOIC-8) | 8-pin SOIC |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| RoHS स्थिति | Compliant (per Maxim/ADI datasheet suffix '+') | — |
| Transceiver Configuration | — | 1 driver and 1 receiver |
| Communication Standards | — | RS-485 and RS-422 |
| Duplex Mode | — | Half-duplex |
| Maximum Data Rate | — | 2.5Mbps |
| Driver Slew Rate | — | Unlimited for the MAX485 family |
| Device Type | — | Low-power differential transceiver |
| पिन काउंट | — | 8 pins |
| सप्लाई करंट | — | [DATA_NEEDED: unloaded and loaded supply current] |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: MAX485CSA operating temperature range] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Differential Input Sensitivity | — | [DATA_NEEDED: receiver differential input sensitivity] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Short-Circuit Protection | — | [DATA_NEEDED: driver short-circuit protection duration] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |