MAX485ESA+ vs MAX485CSA+ तुलना

विस्तृत दोनों ओर की तुलना MAX485ESA+ द्वारा Analog Devices और MAX485CSA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX485ESA+ MAX485ESA+ - 5V RS-485/RS-422 Transceiver, 2.5Mbps, SOIC-8

MAX485ESA+ - 5V RS-485/RS-422 Transceiver, 2.5Mbps, SOIC-8

MAX485ESA+ ✓ सक्रिय
Analog Devices
MAX485CSA+ MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ - 2.5Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX485CSA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर MAX485ESA+ MAX485CSA+
ब्रांड Analog Devices Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
सप्लाई वोल्टेज 4.75 V to 5.25 V (5 V nominal) [DATA_NEEDED: supply voltage range]
डेटा दर 2.5 Mbps —
Supply Current (unloaded) 120 µA to 500 µA —
Receiver Hysteresis 70 mV (typ) —
Common-Mode Input Range -7 V to +12 V —
Differential Input Threshold (V_TH) -0.2 V min / +0.2 V max —
ESD Protection (HBM, driver output) ±15 kV (per datasheet) —
Unit Load 1/8 (up to 256 transceivers on bus) —
ऑपरेटिंग तापमान -40 °C to +85 °C —
पैकेज 8-SOIC (SOIC-8) 8-pin SOIC
माउंटिंग प्रकार Surface Mount Surface mount
RoHS स्थिति Compliant (per Maxim/ADI datasheet suffix '+') —
Transceiver Configuration — 1 driver and 1 receiver
Communication Standards — RS-485 and RS-422
Duplex Mode — Half-duplex
Maximum Data Rate — 2.5Mbps
Driver Slew Rate — Unlimited for the MAX485 family
Device Type — Low-power differential transceiver
पिन काउंट — 8 pins
सप्लाई करंट — [DATA_NEEDED: unloaded and loaded supply current]
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: MAX485CSA operating temperature range]
Common-Mode Voltage Range — [DATA_NEEDED: receiver common-mode voltage range]
Differential Input Sensitivity — [DATA_NEEDED: receiver differential input sensitivity]
Driver Output Current — [DATA_NEEDED: driver output current]
Short-Circuit Protection — [DATA_NEEDED: driver short-circuit protection duration]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध