MC33912BAC vs MC34912G5AC तुलना
विस्तृत दोनों ओर की तुलना MC33912BAC द्वारा NXP Semiconductors और MC34912G5AC द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MC33912BAC - LIN SBC with DC Motor Pre-Driver | NXP Semiconductors
MC33912BAC ✗ जीवन की समाप्तिविशेषता तुलना
| पैरामीटर | MC33912BAC | MC34912G5AC |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Voltage Regulators | Voltage Regulators |
| लाइफसाइकिल स्थिति | उत्पादन बंद | NRND |
| फ़ंक्शन | LIN System Basis Chip (SBC) with DC motor pre-driver and current sense | — |
| Communication Interface | SPI (configuration/diagnostics), LIN 2.0/2.1 (physical layer) | — |
| Supply Voltage Range | 5.5 V to 27 V | — |
| Integrated LDO Output | 5.0 V / 50 mA | — |
| Current Consumption (typical) | 4.5 mA | — |
| DC Motor Pre-Driver | Low-side pre-driver for H-bridge control | — |
| Relay Drivers | 2 x low-side, 1.5 ohm typical RDSon | — |
| Current Sense Amplifier | Integrated, adjustable gain, SPI-readable | — |
| Watchdog | Selectable window watchdog | — |
| LIN Bus Compliance | LIN 2.0 / LIN 2.1 / ISO 9141 physical layer | — |
| ESD Performance (LIN pin) | IEC 61000-4-2, +/-6 kV min (gun test, 150 pF / 330 ohm) | — |
| ISO Pulse Immunity | ISO 7637 pulse 3b compliant | — |
| पैकेज | 32-pin LQFP (exposed pad) | 32-LQFP, 7x7 mm body, exposed thermal pad |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Packaging | Tray | — |
| ऑपरेटिंग तापमान | -40C to +125C (automotive grade) | -40 °C to +125 °C (ambient) |
| RoHS स्थिति | Compliant | Compliant |
| Product Type | — | System Basis Chip (SBC) with LIN transceiver |
| टोपोलॉजी | — | SPI-controlled SBC: LIN 2.5 PHY + 5V LDO + DC motor pre-driver + current-sense amplifier |
| Supply Voltage (VBAT) | — | 5.5 V to 27 V (40 V transient tolerant) |
| Integrated LDO Output (VCC) | — | 5.0 V ±2%, 60 mA |
| LIN Transceiver Standard | — | LIN 2.5 / 2.1 / 2.0 / 1.3 compliant |
| LIN ESD (Contact, IEC 61000-4-2) | — | ±6 kV (gun test, 150 pF / 330 Ω) |
| ISO 7637 Pulse 3b Immunity | — | Tolerant per datasheet |
| DC Motor Pre-Driver Output | — | Gate drive for external N-MOSFET H-bridge; current sense via internal amplifier |
| SPI Interface | — | 16-bit frame, mode 0 / 1, up to 4 MHz |
| Window Watchdog | — | SPI-selectable timing |
| थर्मल शटडाउन | — | Yes (overtemperature protection with SPI flag) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| MSL स्तर | — | 3 (per JEDEC J-STD-020) |