MC908QY1CDTER vs MC908QY4AMPE तुलना
विस्तृत दोनों ओर की तुलना MC908QY1CDTER द्वारा NXP Semiconductors और MC908QY4AMPE द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MC908QY1CDTER - 8-Bit HC08 MCU, 1.5KB Flash, 16-TSSOP | NXP
MC908QY1CDTER ✓ सक्रिय
विशेषता तुलना
| पैरामीटर | MC908QY1CDTER | MC908QY4AMPE |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | NRND |
| Manufacturer | NXP Semiconductors (formerly Freescale) | — |
| Part Family | HC08Q / M68HC08 | — |
| Core Architecture | 8-bit HC08 CISC, Von Neumann | M68HC08 (CPU08) |
| Program Memory (FLASH) | 1.5 KB (1.5K x 8) | — |
| RAM | 128 bytes | — |
| Maximum CPU Clock | 8 MHz (bus) / 32 MHz internal oscillator | — |
| Supply Voltage Range | 4.5 V to 5.5 V (5 V nominal) | — |
| I/O Pins | 14 | 13 (typical for HC08QY4 in PDIP-16) |
| पैकेज | 16-TSSOP (4.40 mm body width) | 16-PDIP (0.300 in / 7.62 mm) |
| Pin Pitch | 0.65 mm | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C (Industrial) | -40C to +125C (industrial, AMPE suffix) |
| माउंटिंग प्रकार | Surface Mount | Through-Hole (DIP) |
| MSL स्तर | [DATA_NEEDED: MSL classification per J-STD-020] | Not applicable (through-hole) |
| RoHS स्थिति | Compliant (Pb-free terminal finish per Octopart listing) | [DATA_NEEDED: RoHS compliance status] |
| Debug Interface | BDM (Background Debug Mode) | — |
| लाइफसाइकिल स्थिति | Active | — |
| डेटा बस चौड़ाई | — | 8-bit |
| Instruction Set | — | CISC, Von Neumann |
| Maximum CPU Frequency | — | 8 MHz |
| Program Memory Type | — | FLASH |
| Program Memory Size | — | 4 KB (4K x 8) |
| RAM Size | — | [DATA_NEEDED: RAM size in bytes] |
| EEPROM / Data FLASH | — | [DATA_NEEDED: data EEPROM size] |
| पिन काउंट | — | 16 |
| Operating Voltage Range | — | [DATA_NEEDED: VDD range] |
| ADC | — | [DATA_NEEDED: ADC channels / resolution] |
| Timers | — | [DATA_NEEDED: timer module count and type] |
| Watchdog | — | COP watchdog (typical for HC08Q) |
| Programming Interface | — | Monitor ROM / background debug mode |
| FLASH Security | — | Yes, blocks readout in monitor mode |
| Family | — | HC08Q sub-family of M68HC08 |