MC9S08QA2CPAE vs MC9S08QA4CFQE तुलना
विस्तृत दोनों ओर की तुलना MC9S08QA2CPAE द्वारा NXP Semiconductors और MC9S08QA4CFQE द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MC9S08QA4CFQE - 8-bit S08 MCU, 4KB Flash, 20MHz | NXP Semiconductors
MC9S08QA4CFQE ✓ सक्रियविशेषता तुलना
| पैरामीटर | MC9S08QA2CPAE | MC9S08QA4CFQE |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | NRND | सक्रिय |
| Core | HCS08 (8-bit) | HCS08 (8-bit) |
| CPU Maximum Frequency | 20 MHz bus / 40 MHz core | — |
| Program Memory | 2 KB Flash (2K x 8) | — |
| RAM | 128 B | 256 B |
| सप्लाई वोल्टेज | 1.8 V to 3.6 V | — |
| ऑपरेटिंग तापमान | -40C to +85C (Industrial) | — |
| पैकेज | 8-pin PDIP (PDIP-8) | 8-DFN-EP (4x4 mm) with Exposed Pad |
| माउंटिंग प्रकार | Through-Hole | Surface Mount |
| ADC | 10-bit, up to 8 channels | — |
| Timers | 2 x TPM (Timer/PWM Module) | — |
| Communication | 1 x SCI/UART, 1 x SPI | — |
| I/O Pins | Up to 6 general-purpose | — |
| Low-Power Modes | Stop1, Stop2, Wait | — |
| Voltage Detection | LVD with reset or interrupt | — |
| Interrupts | Up to 32 sources | — |
| RoHS स्थिति | Compliant | Compliant |
| Instruction Set | — | HC08 with BGND extension |
| CPU Clock (Max) | — | 20 MHz |
| Program Memory (Flash) | — | 4 KB (4K x 8) |
| Operating Voltage (VDD) | — | 1.8 V to 3.3 V |
| Number of I/O Pins | — | [DATA_NEEDED: number of GPIO pins] |
| Low-Power Stop Modes | — | Two (very low power) |
| Low-Voltage Detect (LVD) | — | Yes, with reset or interrupt |
| Debug Interface | — | Background Debug Mode (BDM), single-wire |
| Breakpoints | — | 1 in-circuit + 2 additional (on-chip) |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: industrial -40C to +85C] |
| MSL स्तर | — | [DATA_NEEDED: MSL rating] |