MPC506AU vs MPC506AP तुलना
विस्तृत दोनों ओर की तुलना MPC506AU द्वारा Texas Instruments और MPC506AP द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | MPC506AU | MPC506AP |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Unknown |
| Product Type | Single-ended CMOS analog multiplexer | — |
| Multiplexer Configuration | 16:1 | — |
| Number of Circuits | 1 circuit | — |
| Number of Channels | 16 channels | 16 channels |
| Power-Supply Voltage | 16 V | — |
| On-State Resistance | 1.5 kOhm | — |
| Analog Signal Range | -15 V to +15 V | ±15 V |
| Typical Standby Power | 7.5 mW | — |
| Analog Overvoltage Protection | Supported | — |
| Channel Interaction During Overvoltage | No channel interaction | No channel interaction |
| Switching Behavior | Break-before-make | Break-before-make |
| ऑपरेटिंग तापमान रेंज | -40°C to 85°C | — |
| पैकेज | 28-pin SOIC (DW) | 28-PDIP |
| माउंटिंग प्रकार | Surface mount | Through-hole |
| Technology | CMOS | CMOS |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Device Type | — | Single-ended analog multiplexer |
| Mux Configuration | — | 16:1 |
| Number of Switch Circuits | — | 1 circuit |
| On-Resistance | — | 1.5 kOhm |
| Nominal Supply Voltage | — | 16 V |
| Input Overvoltage Protection | — | Supported |
| Standby Power | — | 7.5 mW typical |
| Operating Voltage | — | 5 V to ±22 V |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |