MPXV2102DP vs MPXV2053DP तुलना
विस्तृत दोनों ओर की तुलना MPXV2102DP द्वारा NXP Semiconductors और MPXV2053DP द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
MPXV2102DP - 100kPa Differential Pressure Sensor 8-BSOP | NXP
MPXV2102DP ✓ सक्रियSTMicroelectronics
MPXV2053DP - 50kPa Differential Pressure Sensor | STMicroelectronics
MPXV2053DP ✓ सक्रियविशेषता तुलना
| पैरामीटर | MPXV2102DP | MPXV2053DP |
|---|---|---|
| ब्रांड | NXP Semiconductors | STMicroelectronics |
| श्रेणी | Pressure Sensors | Pressure Sensors |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Pressure Type | Differential | Differential |
| Operating Pressure Max | 14.5 PSI (100 kPa) | — |
| आउटपुट प्रकार | Analog Voltage (Wheatstone Bridge) | Analog Voltage (mV) |
| Output Span | 0 mV to 40 mV at 10 V excitation | — |
| Full Scale Output (typ) | 40 mV at 10 V | — |
| Supply Voltage (Excitation) | 10 V typical (16 V max) | — |
| ऑपरेटिंग तापमान | -40 C to +125 C | 0 C to +85 C |
| Compensated Temperature | 0 C to 85 C | — |
| पैकेज | 8-BSOP (0.475" / 12.06 mm width) Dual Ports, Same Side | 8-BSOP (0.475 in, 12.06 mm width) |
| Port Size | Male 0.19" (4.93 mm) Tube | — |
| Port Configuration | Dual Ports, Same Side | — |
| Output Impedance | 1.1 kohm nominal | — |
| Technology | Piezoresistive silicon MEMS, on-chip temperature compensated | — |
| माउंटिंग प्रकार | Surface Mount (BSOP) | Surface Mount |
| RoHS स्थिति | Compliant | Compliant |
| Lead Free | Yes | — |
| Pressure Linearity | [DATA_NEEDED: Pressure Linearity %FS] | — |
| Operating Pressure Range | — | 0 kPa to 50 kPa |
| Maximum Pressure Rating | — | 200 kPa |
| Output Voltage Span | — | 0 mV to 40 mV |
| Nominal Sensitivity | — | 0.8 mV/kPa |
| सप्लाई वोल्टेज | — | 10 V nominal (16 V max) |
| Port Type | — | Male tube, 0.13 in (3.3 mm) dual ports, same side |
| Temperature Compensation | — | On-chip, 0 C to +85 C |
| Linearity | — | [DATA_NEEDED: linearity %FS] |
| Bridge Type | — | Piezoresistive, laser trimmed |