NE5532PE4 vs NE5532P तुलना
विस्तृत दोनों ओर की तुलना NE5532PE4 द्वारा Texas Instruments और NE5532P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
NE5532PE4 - Dual 30V 10MHz Low-Noise Op Amp | Texas Instruments
NE5532PE4 ✓ सक्रियविशेषता तुलना
| पैरामीटर | NE5532PE4 | NE5532P |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | Operational amplifier | — |
| Number of Circuits | 2 circuits | — |
| Architecture | Voltage-feedback | — |
| Application Category | Audio | — |
| Total Supply Voltage | 30 V maximum | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Slew Rate | 9 V/µs typical | 9 V/µs typical |
| Equivalent Input Noise Voltage | 5 nV/√Hz typical at 1 kHz | 5 nV/√Hz typical at 1 kHz |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| DC Voltage Gain | 100 V/mV typical | — |
| Input Bias Current | 800 nA typical | — |
| Offset Voltage | 500 µV typical | — |
| पैकेज | 8-DIP, 0.300 in, 7.62 mm | 8-pin PDIP (P) |
| माउंटिंग प्रकार | Through-hole | Through hole |
| RoHS स्थिति | Yes | [DATA_NEEDED: RoHS status] |
| लाइफसाइकिल स्थिति | Active | — |
| Amplifier Count | — | 2 amplifiers |
| Product Type | — | Dual low-noise operational amplifier |
| Maximum Supply Voltage | — | 30 V |
| Supply Voltage Range | — | ±5 V to ±15 V |
| High DC Voltage Gain | — | 100 V/mV typical |
| Peak-to-Peak Output Voltage Swing | — | 32 V typical with VCC = ±18 V and RL = 600 ohm |
| Input Offset Voltage | — | 4000 µV maximum |
| Process Technology | — | Bipolar |
| ऑपरेटिंग तापमान | — | 0 °C to 70 °C |
| Primary Application | — | Audio |
| REACH Status | — | [DATA_NEEDED: REACH status] |