NE5534DRG4 vs NE5534D तुलना
विस्तृत दोनों ओर की तुलना NE5534DRG4 द्वारा Texas Instruments और NE5534D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | NE5534DRG4 | NE5534D |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | Unknown | सक्रिय |
| Amplifier Type | Single low-noise operational amplifier | — |
| Noise Voltage Density | 3.5 nV/√Hz typical | — |
| Unity-Gain Bandwidth | 10 MHz typical | 10 MHz typical |
| Common-Mode Rejection Ratio | 100 dB typical | 100 dB typical |
| High DC Voltage Gain | 100 dB typical | — |
| Peak-to-Peak Output Voltage Swing | 100 V/mV typical under cited conditions | 32 V typical at ±18 V |
| Slew Rate | 13 V/µs typical | 13 V/us typical |
| Supply Voltage Range | Wide supply-voltage range; exact limits [DATA_NEEDED: supply voltage range] | — |
| Circuit Count | 1 circuit | — |
| पैकेज | 8-SOIC | 8-SOIC |
| Package Width | 0.154 inch / 3.90 mm | — |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Current | [DATA_NEEDED: output current] | — |
| RoHS स्थिति | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Product Type | — | Single low-noise operational amplifier |
| Manufacturer | — | Texas Instruments |
| Number of Circuits | — | 1 |
| Total Supply Voltage | — | 10 V to 30 V |
| Equivalent Input Noise Voltage | — | 3.5 nV/Hz |
| DC Voltage Gain | — | 100 dB typical |
| Open-Loop Voltage Gain | — | 100 V/mV typical |
| Supply Configuration | — | ±5 V to ±15 V |
| Output Current Capability | — | [DATA_NEEDED: output current capability] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |