OPA137UA vs OPA137P तुलना

विस्तृत दोनों ओर की तुलना OPA137UA द्वारा Texas Instruments और OPA137P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
OPA137UA OPA137UA - 36V, 1MHz FET-Input Op Amp | Texas Instruments

OPA137UA - 36V, 1MHz FET-Input Op Amp | Texas Instruments

OPA137UA ✓ सक्रिय
Texas Instruments
OPA137P OPA137P - 36V, 1MHz FET Op Amp | Texas Instruments

OPA137P - 36V, 1MHz FET Op Amp | Texas Instruments

OPA137P ✓ सक्रिय

विशेषता तुलना

पैरामीटर OPA137UA OPA137P
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Amplifier Type Single FET-input operational amplifier —
Number of Channels 1 channel 1 channel
Maximum Supply Voltage 36 V 36 V
Gain-Bandwidth Product 1 MHz 1 MHz
Input Common-Mode Range Rail-to-rail to the positive supply Rail-to-rail input to V+
Typical Input Bias Current ±10 pA —
Listed Input Bias Current 5 pA —
Typical Quiescent Current 120 µA per channel —
Listed Quiescent Current 220 µA —
Typical Open-Loop Gain 145 dB —
Input Offset Voltage 1.5 mV 1.5 mV maximum
Input Offset Voltage Temperature Drift 15 µV/°C —
Slew Rate 3.5 V/µs —
Channel Separation 76 dB —
Protection Features Short-circuit protection and ESD protection —
पैकेज 8-SOIC, 0.154 in (3.90 mm) width 8-pin PDIP
RoHS स्थिति RoHS compliant —
Product Type — Single FET-input operational amplifier
Manufacturer — Texas Instruments
Supply Voltage Range — To ±18 V
Input Bias Current — ±5 pA typical
क्वाइसेंट करंट — 120 μA per channel
Open-Loop Gain — 145 dB
माउंटिंग प्रकार — Through-hole
Series — MicroAmplifier
Input Type — FET input
Primary Application — Low-level analog signal conditioning
Operating Voltage — ±18 V maximum supply
Supplier Package Designation — PDIP-8

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध