OPA633KP vs AD815AY तुलना
विस्तृत दोनों ओर की तुलना OPA633KP द्वारा Texas Instruments और AD815AY द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | OPA633KP | AD815AY |
|---|---|---|
| ब्रांड | Texas Instruments | Analog Devices |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | High-speed unity-gain buffer amplifier | — |
| Number of Circuits | 1 circuit | — |
| Gain | 1 unity gain | — |
| Bandwidth | 260 MHz | 120 MHz |
| Slew Rate | 2500 V/µs | — |
| Output Current | 100 mA | — |
| Offset Voltage | 1.5 mV | — |
| Supply Voltage Range | ±5 V to ±16 V | — |
| Total Supply Voltage | [DATA_NEEDED: total supply voltage range] | — |
| पैकेज | 8-pin through-hole DIP | 24-lead SOIC |
| पिन काउंट | 8 pins | — |
| माउंटिंग प्रकार | Through-hole | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | — |
| Output Impedance | [DATA_NEEDED: output impedance] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Voltage Noise | [DATA_NEEDED: input voltage noise density] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Power Consumption | [DATA_NEEDED: typical power consumption] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Dual high-speed differential line driver |
| Amplifier Count | — | 2 amplifiers |
| Configuration | — | Differential driver or two single-ended drivers |
| Minimum Output Current | — | 500 mA per amplifier |
| Minimum Output Drive | — | 400 mA per amplifier into 10 ohm |
| Maximum Differential Output Voltage | — | 40 V p-p on ±15 V supplies |
| Harmonic Distortion | — | -66 dB at 1 MHz into 200 ohm with 40 V p-p output |
| Differential Gain Matching | — | 0.05% into 25 ohm |
| Differential Phase Matching | — | 0.45° into 25 ohm |
| Video Load Capability | — | 6 back-terminated video loads |
| Power Supply | — | ±15 V for 40 V p-p differential output |
| Temperature Grade | — | Industrial temperature range |
| आउटपुट कॉन्फ़िगरेशन | — | Thermally enhanced differential and single-ended outputs |
| ADSL Output Power | — | 26 dBm differential line drive |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |