OPA643P vs OPA642P तुलना
विस्तृत दोनों ओर की तुलना OPA643P द्वारा Texas Instruments और OPA642P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | OPA643P | OPA642P |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Manufacturer | Texas Instruments (Burr-Brown) | — |
| Amplifier Type | Voltage Feedback | — |
| Number of Channels | 1 | — |
| Gain-Bandwidth Product (GBP) | 800 MHz | — |
| Slew Rate | 1000 V/µs | [DATA_NEEDED: slew rate] |
| Input Voltage Noise Density | 2.3 nV/√Hz | — |
| Low Distortion (specified at) | 5 MHz | — |
| Stable for Closed-Loop Gains | ≥ 3 | — |
| Supply Voltage Range | ±5.5 V (max); ±5 V typical | — |
| Supply Current (typ) | [DATA_NEEDED: quiescent supply current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| पैकेज | 8-pin PDIP (P) | 8-pin PDIP |
| माउंटिंग प्रकार | Through-Hole | Through-hole |
| RoHS स्थिति | Compliant (Pb-free variants available) | [DATA_NEEDED: RoHS status] |
| Datasheet Publication | 1998-04-27 (Burr-Brown original) | — |
| Product Type | — | Wideband, low-distortion, low-gain operational amplifier |
| Amplifier Topology | — | Single voltage-feedback amplifier |
| Number of Circuits | — | 1 circuit |
| Gain-Bandwidth Product | — | 400 MHz |
| सप्लाई वोल्टेज | — | ±5.5 V |
| Open-Loop Gain | — | 95 dB |
| Common-Mode Rejection Ratio | — | 90 dB |
| Input Noise Density | — | 2.7 nV/√Hz |
| Low-Distortion Frequency | — | 5 MHz |
| Settling Performance | — | 12-bit settling to 0.01% |
| अधिकतम आउटपुट करंट | — | ±60 mA |
| पिन काउंट | — | 8 pins |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |