P82B715P vs P82B715PN तुलना
विस्तृत दोनों ओर की तुलना P82B715P द्वारा Texas Instruments और P82B715PN द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | P82B715P | P82B715PN |
|---|---|---|
| ब्रांड | Texas Instruments | NXP Semiconductors |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | 2-bit bidirectional I2C/SMBus buffer and cable extender | 2-bit bidirectional I2C bus extender |
| ऑपरेटिंग सप्लाई वोल्टेज | 3 V to 12 V | — |
| Datasheet Listed Supply Range | 4.5 V to 12 V | — |
| Bus Signaling Frequency | Up to 400 kHz | — |
| Bidirectional Channels | 2 | — |
| Bus Capacitance | 3000 pF on the buffered bus | — |
| Propagation Delay | 250 ns | — |
| सप्लाई करंट | 22 mA | [DATA_NEEDED: supply current] |
| पैकेज | 8-pin DIP | 8-pin PDIP (SOT97-1) |
| Package Type | PDIP | — |
| Signal Type | I2C and SMBus bidirectional signals | — |
| Buffering Method | Unidirectional analog current amplification | — |
| Low-Side Interfaces | Lx and Ly | — |
| High-Side Interfaces | Sx and Sy | — |
| Bus Application | Highly-capacitive I2C systems | — |
| Original I2C Bus Limit | 400 pF | — |
| Buffered Bus Wiring Capacitance Limit | 3 nF | — |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| RoHS स्थिति | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Technology | — | Bipolar integrated circuit |
| Supported Bus | — | I2C and derivative bus systems |
| Buffered Signals | — | 2 lines: SDA and SCL |
| Supply Voltage Range | — | 3 V to 12 V |
| Maximum Bus Frequency | — | 400 kHz |
| Directionality | — | Bidirectional |
| पिन काउंट | — | 8 pins |
| Extended Bus Separation | — | Approximately 50 m to 100 m |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| क्वाइसेंट करंट | — | [DATA_NEEDED: quiescent current] |
| Output Current | — | [DATA_NEEDED: output current] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |