PCA9535DW vs PCA9535DB तुलना
विस्तृत दोनों ओर की तुलना PCA9535DW द्वारा Texas Instruments और PCA9535DB द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | PCA9535DW | PCA9535DB |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Device Type | 16-bit I2C/SMBus I/O expander | Remote 16-bit I2C/SMBus low-power I/O expander |
| Number of I/O Lines | 16 | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| इंटरफ़ेस | I2C and SMBus | I2C/SMBus |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 400 kHz | — |
| Interrupt Output | Open-drain interrupt output | Yes |
| Configuration Registers | Yes | Yes |
| Port Configuration | 16 individual general-purpose I/O ports | — |
| Low Standby Current | 1 uA maximum | — |
| पैकेज | 24-pin SOIC, 0.295 inch / 7.50 mm width | 24-SSOP (0.209, 5.30 mm width) |
| Packaging | Tube | Tube |
| माउंटिंग प्रकार | Surface mount | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Bus Addressing | Address configuration registers; exact address range [DATA_NEEDED: bus address range] | — |
| Input Logic Levels | [DATA_NEEDED: input logic thresholds] | — |
| Output Drive Current | [DATA_NEEDED: output drive current] | — |
| I/O Pin Direction Control | Configurable per port; exact register details [DATA_NEEDED: direction register map] | — |
| ESD Protection | [DATA_NEEDED: ESD ratings] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Number of I/O | — | 16 |
| I2C/SMBus Clock Frequency | — | 400 kHz |
| I/O Direction Control | — | Programmable input/output |
| Standby Current Consumption | — | 1 uA maximum |
| I/O Voltage Levels | — | [DATA_NEEDED: I/O voltage levels] |
| I/O Output Current | — | [DATA_NEEDED: output current] |
| Input Hysteresis | — | [DATA_NEEDED: input hysteresis] |
| Power-On Reset | — | [DATA_NEEDED: power-on reset behavior] |
| I2C Address | — | [DATA_NEEDED: programmable I2C address range] |