PCM5102APWR vs PCM5100APWR तुलना

विस्तृत दोनों ओर की तुलना PCM5102APWR द्वारा Texas Instruments और PCM5100APWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
PCM5102APWR PCM5102APWR - 2VRMS 112dB Stereo DAC w/ PLL | TI

PCM5102APWR - 2VRMS 112dB Stereo DAC w/ PLL | TI

PCM5102APWR ✓ सक्रिय
Texas Instruments
PCM5100APWR PCM5100APWR - 32-Bit Stereo DAC | Texas Instruments

PCM5100APWR - 32-Bit Stereo DAC | Texas Instruments

PCM5100APWR ✓ सक्रिय

विशेषता तुलना

पैरामीटर PCM5102APWR PCM5100APWR
ब्रांड Texas Instruments Texas Instruments
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Stereo Audio DAC —
रेज़ोल्यूशन 32-bit —
Dynamic Range 112 dB 100 dB
THD+N 100 dB (typical) —
आउटपुट वोल्टेज 2.1 VRMS (DirectPath) —
आउटपुट प्रकार Ground-centered, cap-free DirectPath stereo line output
Sample Rate 8 kHz to 384 kHz —
Digital Interface I2S, LJ, RJ, DSP (PCM) —
Supply Voltage (DVDD) 3.3 V —
Integrated PLL Yes (BCLK-only operation supported) —
Control Interface Hardware pins / I2C —
पैकेज TSSOP-20 (PW) —
ऑपरेटिंग तापमान -25C to +85C —
माउंटिंग प्रकार Surface Mount Surface mount
MSL स्तर Level-1-260C-UNLIM —
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status]
Device Type — Stereo audio digital-to-analog converter
Supported PCM Word Lengths — 16 bit, 24 bit, 32 bit
Maximum Sampling Rate — 384 kHz
Maximum Output Voltage — 2.1 Vrms
Minimum Output Load — 1 kΩ
ऑपरेटिंग सप्लाई वोल्टेज — 3 V to 3.6 V
Digital Audio Interface — I2S-compatible serial PCM interface
Clock Architecture — Integrated audio PLL with BCK reference and internal SCK generation
Bias Architecture — Integrated negative charge pump
Output DC-Blocking Capacitors — Not required for DirectPath operation
Channel Count — 2 channels
पिन काउंट — 20 pins
Package Type — 20-pin TSSOP
आउटपुट नॉइज़ — Ultra-low out-of-band noise; numerical value [DATA_NEEDED: output noise specification]
Total Harmonic Distortion plus Noise — [DATA_NEEDED: THD+N specification]
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध