S912XET256J2VAA vs S9S12H256J2VFVER तुलना
विस्तृत दोनों ओर की तुलना S912XET256J2VAA द्वारा NXP Semiconductors और S9S12H256J2VFVER द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
NXP Semiconductors
S912XET256J2VAA - 16-bit S12X MCU, 256KB Flash, 50MHz | NXP
S912XET256J2VAA ✓ सक्रियNXP Semiconductors
S9S12H256J2VFVER - 16-bit 50MHz 256KB MCU | NXP | Automotive
S9S12H256J2VFVER ✓ सक्रियविशेषता तुलना
| पैरामीटर | S912XET256J2VAA | S9S12H256J2VFVER |
|---|---|---|
| ब्रांड | NXP Semiconductors | NXP Semiconductors |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | HCS12X (S12X CPU + XGATE co-processor) | — |
| डेटा बस चौड़ाई | 16-bit | — |
| Program Memory (Flash) | 256 KB (256K x 8) | — |
| Maximum CPU Frequency | 50 MHz | — |
| Supply Voltage Range | 1.8 V / 2.8 V / 5 V | — |
| ऑपरेटिंग तापमान रेंज | -40 °C to +105 °C | -40C to +105C |
| Package Type | 80-QFP (14x14 mm, PQFP / QFP-80) | 144-LQFP (20x20 mm) |
| माउंटिंग प्रकार | Surface Mount (Gull Wing) | Surface Mount |
| ADC Resolution | 12-bit | — |
| ADC Conversion Time | 3 µs | — |
| Timers | ECT (Enhanced Capture Timer), PIT, RTI | — |
| Memory Protection Unit | Yes (Supervisor/User modes) | — |
| EEPROM Emulation | Yes (hardware-emulated) | — |
| Automotive Qualification | Yes (AEC-Q100 grade) | Automotive Qualified |
| Terminal Count | 80 | — |
| Terminal Form | Gull Wing | — |
| Core Processor | — | HCS12 (S12 core) |
| Core Size | — | 16-bit |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 50 MHz |
| Program Memory Size | — | 256 KB (256K x 8) FLASH |
| RAM Size | — | 12 KB |
| EEPROM Size | — | 2 KB |
| Data Path Width | — | Full 16-bit throughout |
| PLL | — | On-chip PLL for performance/power adjustment |
| Wake-up GPIO | — | 12 general-purpose I/O pins with interrupt and wake-up from STOP |
| Series | — | HCS12 (S9S12H256 family) |
| सप्लाई वोल्टेज | — | [DATA_NEEDED: supply voltage range] |
| Number of I/O | — | [DATA_NEEDED: total I/O count] |
| Peripherals | — | [DATA_NEEDED: peripheral set (CAN, SCI, SPI, ATD, etc.)] |