SI4136-BT vs SI4113-BT तुलना
विस्तृत दोनों ओर की तुलना SI4136-BT द्वारा Silicon Labs और SI4113-BT द्वारा Silicon Labs. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | SI4136-BT | SI4113-BT |
|---|---|---|
| ब्रांड | Silicon Labs | Silicon Labs |
| श्रेणी | Clock & Timing | Clock & Timing |
| लाइफसाइकिल स्थिति | Unknown | सक्रिय |
| Device Type | ISM RF frequency synthesizer IC | — |
| Maximum Operating Frequency | 2.5 GHz | — |
| Number of Integrated VCOs | 3 | — |
| Integrated Functions | VCOs, loop filters, varactors, resonators, reference divider, VCO divider, and phase detectors | Integrated VCOs and loop filters |
| Control Interface | Three-wire serial interface | — |
| Programmable Settings | Divider and power-down settings | — |
| Standby Current | 5 uA | 1 µA |
| Typical Supply Current | 25.7 mA | 18 mA |
| Output Frequency Information | 2.5 GHz maximum operating frequency | — |
| पैकेज | 24-TSSOP | 24-pin TSSOP |
| Package Width | 4.40 mm | 4.40 mm (0.173 in) |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Phase Noise | Low phase noise; numeric value not provided in verified data | — |
| External Component Requirement | Minimal external components required | — |
| सप्लाई वोल्टेज | [DATA_NEEDED: supply voltage range] | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | Maximum +85 °C |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | No per Mouser listing |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| लाइफसाइकिल स्थिति | [DATA_NEEDED: manufacturer lifecycle status] | — |
| Product Type | — | Dual-band RF frequency synthesizer IC |
| Maximum Frequency | — | 1.8 GHz |
| Supply Voltage Range | — | 2.7 V to 3.6 V |
| Typical Operating Supply | — | 3.6 V |
| Input-to-Output Ratio | — | 1:1 |
| External Components Required | — | 2 minimum external components |
| RF Outputs | — | RF1 and RF2 outputs |
| Harmonic Suppression | — | -26 dBc |
| Power-Down Modes | — | Programmable |