SIGFOX-MOD1-E vs WSSFM10R1 तुलना
विस्तृत दोनों ओर की तुलना SIGFOX-MOD1-E द्वारा XoverIoT और WSSFM10R1 द्वारा WISOL. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | SIGFOX-MOD1-E | WSSFM10R1 |
|---|---|---|
| ब्रांड | XoverIoT | WISOL |
| श्रेणी | RF Modules | RF Modules |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Module Type | Sigfox transceiver modem (RF module) | — |
| Operating Frequency | 868 MHz (ISM sub-GHz, RCZ1) | — |
| Protocol | Sigfox verified (ultra-narrowband, bidirectional) | Sigfox-only mode (no Sub-1 GHz raw radio fallback) |
| Antenna Interface | U.FL connector for external antenna | — |
| Host Microcontroller | STMicroelectronics STM32L051 (ARM Cortex-M0+) | — |
| Firmware Interface | AT-command set on serial line (UART) | — |
| Modulation | Sigfox ultra-narrowband (UNB) | — |
| TX/RX | Bidirectional (uplink and downlink) | — |
| Operating Mode | Sigfox modem with external antenna connector | — |
| Compliance Status | Sigfox verified | — |
| Target Market | IoT sensor devices, low-power battery-operated applications | — |
| माउंटिंग प्रकार | Surface Mount (module) | Surface Mount (SMD), Tape & Reel |
| RoHS स्थिति | Compliant (per ST partner listing) | — |
| Series | SIGFOX-MOD1 / SIGFOX-MOD2 family | — |
| Variant Identifier | -E denotes external antenna (U.FL) connector | — |
| Manufacturer | — | WISOL (Sigfox IoT BU transitioned to SEONGJI Industrial Co., LTD effective 2025-04-01) |
| Part Family | — | WSSFM10 Sigfox module family |
| Regional Zone | — | RCZ1 (Europe, Middle East, Africa), RCZ6 (India), RCZ7 (Russia) |
| Module Dimensions | — | 13.0 x 15.0 x 2.21 mm |
| पैकेज | — | 31-pin SMD land-grid module |
| Host Interface | — | UART (AT command set on AT variants) |
| Frequency Reference | — | Integrated TCXO |
| Integrated MCU | — | Yes (on-board) |
| Integrated RF Transceiver | — | Yes (OnSemi AX-Sigfox implementation) |
| Recommended Maximum TX Output Setting | — | 14 dBm default setting (per datasheet rev. 12) |
| Pin-to-Pin Compatible Family | — | RCZ1/RCZ2/RCZ3/RCZ4 module variants share 31-pin layout |
| GPIO2/GPIO3 Note | — | Marked Not Connected on RCZ2/RCZ4-compatible firmware images |
| Operating Conditions | — | VCC = 3.3 V typical, Temp = 25 C (per datasheet RF spec section) |
| Compliance | — | RoHS (per distributor listings) |