SN65HVD05P vs SN65HVD07P तुलना
विस्तृत दोनों ओर की तुलना SN65HVD05P द्वारा Texas Instruments और SN65HVD07P द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
SN65HVD05P - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05P ✓ सक्रियTexas Instruments
SN65HVD07P - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD07P ✓ सक्रियविशेषता तुलना
| पैरामीटर | SN65HVD05P | SN65HVD07P |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | High-output RS-485 transceiver | RS-485 and RS-422 differential transceiver |
| Device Architecture | 3-state differential line driver and differential line receiver | — |
| ऑपरेटिंग सप्लाई वोल्टेज | 4.5 V to 5.5 V | — |
| Interface Standards | ANSI TIA/EIA-485-A and ISO 8482E | — |
| Bus Compatibility | RS-485 and RS-422 | — |
| Unit Load | 1/8th unit load | 1/8th unit-load option |
| Maximum Bus Nodes | Up to 256 nodes | Up to 256 nodes |
| Bus-Pin ESD Protection | Exceeds 16 kV HBM | Exceeds 16 kV HBM |
| Driver Output | Differential high-output driver | — |
| Driver State Control | 3-state | — |
| Driver Output Slew Rate | Controlled | Controlled |
| Receiver Architecture | Differential line receiver | — |
| Failsafe Receiver Options | Open-circuit, short-circuit, and idle-bus options | — |
| पैकेज | PDIP (P), 8 pins | 8-pin PDIP (P) |
| माउंटिंग प्रकार | Through-hole | Through-hole |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | -40°C to 85°C |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| Transceiver Configuration | — | 1/1 transceiver |
| Driver State Capability | — | 3-state |
| Receiver Implementation | — | Differential receiver |
| Driver Implementation | — | Differential line driver |
| Interoperability Standard | — | ANSI TIA/EIA-485-A and ISO 8482E |
| Package Pin Count | — | 8 pins |
| Package Lead Spacing | — | 0.300 inch (7.62 mm) |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |