SN65HVD20D vs SN65HVD82D तुलना

विस्तृत दोनों ओर की तुलना SN65HVD20D द्वारा Texas Instruments और SN65HVD82D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD20D SN65HVD20D - 25 Mbps Extended Common-Mode RS-485 | TI

SN65HVD20D - 25 Mbps Extended Common-Mode RS-485 | TI

SN65HVD20D ✓ सक्रिय
Texas Instruments
SN65HVD82D SN65HVD82D - 5V RS-485 Transceiver with IEC ESD | TI

SN65HVD82D - 5V RS-485 Transceiver with IEC ESD | TI

SN65HVD82D ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD20D SN65HVD82D
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Extended common-mode RS-485 transceiver RS-422/RS-485 half-duplex transceiver
Supply Voltage Range 4.5 V to 5.5 V —
Nominal Supply Voltage 5 V —
Number of Transmitters 1 —
Number of Receivers 1 —
Duplex Mode Half-duplex —
Maximum Signaling Rate 25 Mbit/s —
Fault Protection Range -27 V to +27 V —
पैकेज 8-pin SOIC 8-pin SOIC
माउंटिंग प्रकार Surface mount Surface Mount
Standards Compliance TIA/EIA-485-A —
Common-Mode Capability Extended common-mode range —
ESD Protection High ESD protection IEC ESD protection
Receiver Hysteresis Wide receiver hysteresis —
Failsafe Behavior Failsafe operation —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] —
Propagation Delay [DATA_NEEDED: transmitter and receiver propagation delay] [DATA_NEEDED: propagation delay]
RoHS स्थिति [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
सप्लाई वोल्टेज — 5 V
डेटा दर — 250 kbps
Interface Standard — RS-422/RS-485
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Package Pin Count — 8 pins
ऑपरेटिंग तापमान — -40 C to +85 C
ESD Model Coverage — Human-Body Model, Air-Gap Discharge, and Contact Discharge
Transceiver Configuration — 1/1 transceiver
Operating Mode — Half Duplex
Maximum Input Voltage — [DATA_NEEDED: maximum input voltage]
Output Current — [DATA_NEEDED: output current]
Receiver Sensitivity — [DATA_NEEDED: receiver sensitivity]
Common-Mode Rejection — [DATA_NEEDED: common-mode rejection]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध