SN75176 vs MAX485EPA+ तुलना

विस्तृत दोनों ओर की तुलना SN75176 द्वारा Texas Instruments और MAX485EPA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN75176 SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments

SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments

SN75176 ✓ सक्रिय
Analog Devices
MAX485EPA+ MAX485EPA+ - 2.5Mbps RS-485/RS-422 Transceiver | Maxim Integrated

MAX485EPA+ - 2.5Mbps RS-485/RS-422 Transceiver | Maxim Integrated

MAX485EPA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN75176 MAX485EPA+
ब्रांड Texas Instruments Analog Devices
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis 50 mV (typical) —
Supply Voltage (Vcc) 4.75 V to 5.25 V —
ऑपरेटिंग तापमान 0 °C to +70 °C [DATA_NEEDED: operating temperature range]
Driver Output Current ±60 mA (max) —
Common-Mode Input Range -7 V to +12 V —
Differential Input Threshold ±200 mV —
Quiescent Supply Current (enabled) 30 mA (typical) —
Shutdown Supply Current 1 µA (typical) —
पैकेज 8-pin PDIP (P) 8-pin PDIP
माउंटिंग प्रकार Through-Hole Through-hole
Standards Compliance ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 —
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status]
Product Type — RS-485/RS-422 transceiver
Driver Count — 1 driver
Receiver Count — 1 receiver
Communication Mode — Half-duplex
Supply Voltage Range — 4.75 V to 5.25 V
Maximum Data Rate — 2.5 Mbps
Slew Rate — Not limited
Driver Protection — Short-circuit current limited and protected
Interface Standards — RS-422 and RS-485
Driver Output — Differential
Receiver Input — Differential
Power Class — Low-power transceiver
क्वाइसेंट करंट — [DATA_NEEDED: quiescent current]
Common-Mode Voltage — [DATA_NEEDED: common-mode voltage range]
ESD Protection — [DATA_NEEDED: ESD rating]
REACH Status — [DATA_NEEDED: REACH status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध