SN75176BP vs SN75176 तुलना
विस्तृत दोनों ओर की तुलना SN75176BP द्वारा Texas Instruments और SN75176 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ सक्रियविशेषता तुलना
| पैरामीटर | SN75176BP | SN75176 |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Differential bus transceiver | — |
| Supported Standards | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11, ITU X.27 | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Bus Modes | RS-422 and RS-485 | — |
| Bus Topology | Multipoint transmission | — |
| Driver Output | Three-state driver | — |
| Receiver Output | Three-state receiver | — |
| सप्लाई वोल्टेज | [DATA_NEEDED: supply voltage] | — |
| Logic Input Voltage | [DATA_NEEDED: logic input voltage] | — |
| Driver Differential Output Voltage | [DATA_NEEDED: driver differential output voltage] | — |
| Receiver Differential Input Voltage | [DATA_NEEDED: receiver differential input voltage] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Maximum Bus Length | [DATA_NEEDED: maximum bus length] | — |
| Maximum Node Count | [DATA_NEEDED: maximum node count] | — |
| ऑपरेटिंग तापमान रेंज | 0°C to 70°C | — |
| पैकेज | 8-pin PDIP (P) | 8-pin PDIP (P) |
| माउंटिंग प्रकार | Through-hole | Through-Hole |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| फ़ंक्शन | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| ऑपरेटिंग तापमान | — | 0 °C to +70 °C |
| Driver Output Current | — | ±60 mA (max) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |