SP485CN-L vs MAX485CPA+ तुलना
विस्तृत दोनों ओर की तुलना SP485CN-L द्वारा MaxLinear और MAX485CPA+ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
MAX485CPA+ - Low-Power RS-485/RS-422 Transceiver | Analog Devices
MAX485CPA+ ✓ सक्रियविशेषता तुलना
| पैरामीटर | SP485CN-L | MAX485CPA+ |
|---|---|---|
| ब्रांड | MaxLinear | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Transceiver Type | Single transmitter/single receiver half-duplex transceiver | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Maximum Data Rate | 5 Mbps | [DATA_NEEDED: maximum data rate] |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Logic and Bus Function | Bidifferential half-duplex serial interface | — |
| Architecture | BiCMOS | — |
| Power Class | Low-power operation | — |
| Driver Count | 1 | 1 |
| Receiver Count | 1 | 1 |
| पैकेज | 8-pin SOIC | 8-pin PDIP |
| माउंटिंग प्रकार | Surface Mount | Through-hole |
| Temperature Range | 0 C to 70 C | — |
| Bus Topology | Half-duplex differential bus | — |
| Signaling | Differential RS-422/RS-485 | — |
| EMI Behavior | [DATA_NEEDED: slew-rate and transient-emission details] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| क्वाइसेंट करंट | [DATA_NEEDED: quiescent current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: driver output current] |
| Termination Requirement | [DATA_NEEDED: manufacturer termination and biasing guidance] | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | unknown |
| AEC-Q100 Qualification | not_applicable | unknown |
| Product Type | — | RS-485/RS-422 low-power transceiver |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | RS-485 and RS-422 |
| Signal Type | — | Differential |
| Slew Rate | — | Slew-rate-limited |
| सप्लाई वोल्टेज | — | [DATA_NEEDED: supply voltage] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Quiescent Supply Current | — | [DATA_NEEDED: quiescent supply current] |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |