SP485RCN-L vs SP485REP-L तुलना

विस्तृत दोनों ओर की तुलना SP485RCN-L द्वारा MaxLinear और SP485REP-L द्वारा Exar Corporation. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

MaxLinear
SP485RCN-L SP485RCN-L - 1/10-Unit-Load RS-485 Transceiver | MaxLinear

SP485RCN-L - 1/10-Unit-Load RS-485 Transceiver | MaxLinear

SP485RCN-L ✓ सक्रिय
Exar Corporation
SP485REP-L SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L ✓ सक्रिय

विशेषता तुलना

पैरामीटर SP485RCN-L SP485REP-L
ब्रांड MaxLinear Exar Corporation
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex RS-485/RS-422 transceiver Half-duplex RS-485/RS-422 transceiver
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Maximum Data Rate 5 Mbps —
Receiver Unit Load 1/10 unit load 1/10 unit load
Receiver Input Impedance High; more than 400 transceivers supported per transmission line 150 kOhm typical
Driver and Receiver Configuration Half-duplex —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
Process Technology BiCMOS —
ESD Tolerance Enhanced versus the original SP485; exact rating not stated —
पैकेज 8-pin narrow SOIC 8-pin plastic DIP
माउंटिंग प्रकार Surface mount Through-hole
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] —
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] —
Differential Output Voltage [DATA_NEEDED: differential output voltage] —
Receiver Sensitivity [DATA_NEEDED: receiver sensitivity] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] —
Maximum Bus Node Count More than 400 transceivers —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Lead-Free Status [DATA_NEEDED: lead-free status] [DATA_NEEDED: lead-free status]
Supported Transceivers per Line — More than 400 transceivers
Propagation Delay — 60 ns
Minimum Operating Temperature — -40 C
Maximum Operating Temperature — +85 C
Duplex Configuration — Half-duplex
Driver Configuration — 1/1 differential driver
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध