STM32F103ZCT6 vs STM32F103ZET6TR तुलना
विस्तृत दोनों ओर की तुलना STM32F103ZCT6 द्वारा STMicroelectronics और STM32F103ZET6TR द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
STMicroelectronics
STM32F103ZCT6 - 72MHz Cortex-M3 256KB MCU | STMicroelectronics
STM32F103ZCT6 ✓ सक्रियSTMicroelectronics
STM32F103ZET6TR - 72MHz Cortex-M3 MCU 512KB Flash | STMicroelectronics (Tape & Reel)
STM32F103ZET6TR ✓ सक्रियविशेषता तुलना
| पैरामीटर | STM32F103ZCT6 | STM32F103ZET6TR |
|---|---|---|
| ब्रांड | STMicroelectronics | STMicroelectronics |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| यूनिट मूल्य (USD) | — | $5.39 |
| Core Processor | ARM Cortex-M3 | ARM Cortex-M3 32-bit RISC |
| Core Size | 32-Bit | — |
| Max Clock Frequency | 72 MHz | — |
| Flash Memory | 256 KB (256K x 8) | — |
| SRAM | 48 KB | — |
| Supply Voltage Range | 2.0 V to 3.6 V | 2.0 V to 3.6 V |
| ऑपरेटिंग तापमान | -40C to +85C | -40C to +85C |
| ADC Resolution | 12-Bit | 12-bit, 3 ADCs, up to 21 channels |
| Number of ADCs | 3 | — |
| Timers | 11 (including 2 advanced-control) | Advanced-control, general-purpose and basic timers plus RTC |
| Communication Interfaces | 13 (USART, SPI, I2C, USB, CAN) | 5 USART, 3 SPI, 2 I2C, 1 CAN 2.0B, 1 USB 2.0 FS, 1 SDIO |
| USB | USB 2.0 Full-Speed Device | — |
| CAN | CAN 2.0B | — |
| DMA Channels | [DATA_NEEDED: number of DMA channels] | 12 |
| GPIO Count | [DATA_NEEDED: GPIO count] | — |
| पैकेज | 144-LQFP (20x20 mm) | LQFP-144 (20 x 20 mm) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Process Technology | 130 nm | — |
| Debug Interfaces | JTAG, SWD | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | Compliant |
| अधिकतम क्लॉक फ़्रीक्वेंसी | — | 72 MHz |
| Core Performance | — | 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Memory Size | — | 512 KB Flash |
| SRAM Size | — | 64 KB |
| Number of GPIOs | — | 112 |
| DAC Resolution | — | 12-bit, 2 channels |
| Debug Interface | — | JTAG and Serial Wire Debug (SWD) |
| Boot Sources | — | Flash, system memory, or SRAM |