STM32L081CBT6 vs STM32L071CBT7 तुलना
विस्तृत दोनों ओर की तुलना STM32L081CBT6 द्वारा STMicroelectronics और STM32L071CBT7 द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
STMicroelectronics
STM32L081CBT6 - Ultra-Low-Power ARM Cortex-M0+ MCU | STMicroelectronics
STM32L081CBT6 ✓ सक्रियSTMicroelectronics
STM32L071CBT7 - 32MHz Cortex-M0+ 128KB MCU | STMicroelectronics
STM32L071CBT7 ✓ सक्रियविशेषता तुलना
| पैरामीटर | STM32L081CBT6 | STM32L071CBT7 |
|---|---|---|
| ब्रांड | STMicroelectronics | STMicroelectronics |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core | ARM Cortex-M0+ | — |
| Maximum Frequency | 32 MHz | — |
| Flash Memory | 192 KB | 128 KB |
| SRAM | 20 KB | — |
| पैकेज | LQFP-48 (7x7 mm) | 48-LQFP, 7 x 7 mm |
| Supply Voltage Range | 1.65 V to 3.6 V | [DATA_NEEDED: operating supply voltage range] |
| ऑपरेटिंग तापमान रेंज | -40C to +85C | -40 C to +105 C |
| ADC | 12-bit, 16 channels, with hardware oversampling | — |
| DAC | 12-bit, 1 channel | — |
| Comparators | 2 | — |
| USB | USB 2.0 full-speed device | — |
| RTC | Calendar and alarm, with backup registers | — |
| AES | 128-bit hardware encryption | — |
| Low-power modes | Sleep, Low-power Run, Low-power Sleep, Stop, Standby | — |
| Dynamic power consumption | 84 µA/MHz in Run mode | — |
| Standby current | 0.29 µA with RTC | — |
| GPIO | Up to 37 I/Os | — |
| Communication interfaces | I2C, SPI, USART, LPUART | — |
| RoHS स्थिति | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Ultra-low-power Arm Cortex-M0+ microcontroller |
| Architecture | — | 32-bit Arm Cortex-M0+ RISC |
| Maximum CPU Frequency | — | 32 MHz |
| Flash Organization | — | 128K x 8 |
| RAM | — | [DATA_NEEDED: RAM size] |
| ADC Resolution | — | 12 bit |
| पिन काउंट | — | 48 pins |
| माउंटिंग प्रकार | — | Surface Mount |
| GPIO Count | — | [DATA_NEEDED: GPIO count] |
| UART Count | — | [DATA_NEEDED: UART count] |
| SPI Count | — | [DATA_NEEDED: SPI count] |
| I2C Count | — | [DATA_NEEDED: I2C count] |
| Active Current | — | [DATA_NEEDED: active current] |
| Standby Current | — | [DATA_NEEDED: standby current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |