STM32L452RET6P vs STM32L412RBT6P तुलना
विस्तृत दोनों ओर की तुलना STM32L452RET6P द्वारा STMicroelectronics और STM32L412RBT6P द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
STMicroelectronics
STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
STM32L452RET6P ✓ सक्रियSTMicroelectronics
STM32L412RBT6P - 80MHz Cortex-M4 MCU 128KB Flash LQFP-64 | STMicroelectronics
STM32L412RBT6P ✓ सक्रियविशेषता तुलना
| पैरामीटर | STM32L452RET6P | STM32L412RBT6P |
|---|---|---|
| ब्रांड | STMicroelectronics | STMicroelectronics |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | Arm Cortex-M4F with FPU and DSP | Arm Cortex-M4 with FPU (single precision) |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 80 MHz | 80 MHz (100 DMIPS) |
| DMIPS Performance | 100 DMIPS | — |
| Flash Memory | 512 KB | — |
| SRAM | 160 KB | 40 KB |
| Supply Voltage Range | 1.71 V to 3.6 V | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C or -40 C to +125 C (grade dependent) | -40 C to +85 C |
| Shutdown Mode Current | 22 nA (5 wakeup pins) | — |
| VBAT Mode Current | 145 nA (RTC + 32x32-bit backup registers) | — |
| पैकेज | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) |
| माउंटिंग प्रकार | Surface Mount | — |
| USB Interface | USB 2.0 Full-Speed Device with embedded PHY and DFS | — |
| ADC / DAC | 2x 12-bit ADC (5 Msps), 2x 12-bit DAC | — |
| Analog Peripherals | 2 op-amps, 2 comparators | — |
| Connectivity | CAN 2.0B, 2x I2C, 3x SPI, 4x USART, 2x UART, 1x LPUART | — |
| LCD Driver | Yes, up to 8x40 segments | — |
| Hardware Crypto | AES-256 | — |
| RoHS स्थिति | Compliant | — |
| External SMPS | Yes (integrated SMPS step-down converter) | — |
| Program Flash Memory | — | 128 KB (single bank) |
| Supply Voltage (VDD) | — | 1.71 V to 3.6 V |
| पिन काउंट | — | 64 |
| ADC | — | 1 x 12-bit, 5 Msps (up to 16 channels) |
| DAC | — | 2 x 12-bit |
| Comparators | — | 2 x rail-to-rail |
| Operational Amplifiers | — | 2 x on-chip OPAMP |
| USB | — | USB 2.0 Full-Speed Device (with dedicated 48 MHz OSC) |
| CAN | — | 1 x CAN 2.0B |
| Communication Peripherals | — | 3x I2C, 3x SPI, 3x USART + 1x UART |
| Timers | — | 4x 16-bit, 2x 16-bit low-power, 2x watchdog, SysTick |
| RTC | — | Yes, with calendar and alarm |
| TRNG | — | True Random Number Generator (AES-256 capable) |
| Low-Power Modes | — | Shutdown ~30 nA, Standby ~120 nA, Stop with RTC ~420 nA |
| Internal Voltage Regulator | — | Integrated LDO and SMPS step-down |
| Backup Domain | — | VBAT pin for RTC and backup register retention |
| RoHS / REACH | — | ROHS3 compliant (per distributor data) |