STM32L452RET6P vs STM32L433RCT6 तुलना
विस्तृत दोनों ओर की तुलना STM32L452RET6P द्वारा STMicroelectronics और STM32L433RCT6 द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
STMicroelectronics
STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
STM32L452RET6P ✓ सक्रियSTMicroelectronics
STM32L433RCT6 - Ultra-Low-Power ARM Cortex-M4 MCU | STMicroelectronics
STM32L433RCT6 ✓ सक्रियविशेषता तुलना
| पैरामीटर | STM32L452RET6P | STM32L433RCT6 |
|---|---|---|
| ब्रांड | STMicroelectronics | STMicroelectronics |
| श्रेणी | Microcontrollers | Microcontrollers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Core Architecture | Arm Cortex-M4F with FPU and DSP | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 80 MHz | — |
| DMIPS Performance | 100 DMIPS | — |
| Flash Memory | 512 KB | 256 KB |
| SRAM | 160 KB | 64 KB |
| Supply Voltage Range | 1.71 V to 3.6 V | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C or -40 C to +125 C (grade dependent) | — |
| Shutdown Mode Current | 22 nA (5 wakeup pins) | — |
| VBAT Mode Current | 145 nA (RTC + 32x32-bit backup registers) | — |
| पैकेज | 64-LQFP (10x10 mm) | LQFP64 |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| USB Interface | USB 2.0 Full-Speed Device with embedded PHY and DFS | — |
| ADC / DAC | 2x 12-bit ADC (5 Msps), 2x 12-bit DAC | — |
| Analog Peripherals | 2 op-amps, 2 comparators | — |
| Connectivity | CAN 2.0B, 2x I2C, 3x SPI, 4x USART, 2x UART, 1x LPUART | — |
| LCD Driver | Yes, up to 8x40 segments | — |
| Hardware Crypto | AES-256 | — |
| RoHS स्थिति | Compliant | Compliant |
| External SMPS | Yes (integrated SMPS step-down converter) | — |
| Core | — | ARM Cortex-M4 with FPU |
| Maximum Frequency | — | 80 MHz |
| Operating Voltage | — | 1.71 V to 3.6 V |
| Standby Current | — | 100 nA |
| ADC | — | 12-bit with hardware oversampling |
| DAC | — | 12-bit |
| Communication Interfaces | — | USART, SPI, I2C, USB |
| Real-Time Clock | — | Yes |
| Process Technology | — | 40 nm |
| ऑपरेटिंग तापमान | — | -40C to +85C |