STM32L452RET6P vs STM32L476RET6 तुलना

विस्तृत दोनों ओर की तुलना STM32L452RET6P द्वारा STMicroelectronics और STM32L476RET6 द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

STMicroelectronics
STM32L452RET6P STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics

STM32L452RET6P - 80MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics

STM32L452RET6P ✓ सक्रिय
STMicroelectronics
STM32L476RET6 STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics

STM32L476RET6 - 80MHz ARM Cortex-M4 MCU 512KB Flash | STMicroelectronics

STM32L476RET6 ✓ सक्रिय

विशेषता तुलना

पैरामीटर STM32L452RET6P STM32L476RET6
ब्रांड STMicroelectronics STMicroelectronics
श्रेणी Microcontrollers Microcontrollers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Core Architecture Arm Cortex-M4F with FPU and DSP ARM Cortex-M4 with FPU and DSP instructions
अधिकतम क्लॉक फ़्रीक्वेंसी 80 MHz 80 MHz
DMIPS Performance 100 DMIPS —
Flash Memory 512 KB —
SRAM 160 KB 128 KB
Supply Voltage Range 1.71 V to 3.6 V 1.7 V to 3.6 V
ऑपरेटिंग तापमान रेंज -40 C to +85 C or -40 C to +125 C (grade dependent) -40C to +85C (T6 suffix)
Shutdown Mode Current 22 nA (5 wakeup pins) —
VBAT Mode Current 145 nA (RTC + 32x32-bit backup registers) —
पैकेज 64-LQFP (10x10 mm) 64-LQFP (10x10 mm)
माउंटिंग प्रकार Surface Mount —
USB Interface USB 2.0 Full-Speed Device with embedded PHY and DFS —
ADC / DAC 2x 12-bit ADC (5 Msps), 2x 12-bit DAC —
Analog Peripherals 2 op-amps, 2 comparators —
Connectivity CAN 2.0B, 2x I2C, 3x SPI, 4x USART, 2x UART, 1x LPUART —
LCD Driver Yes, up to 8x40 segments —
Hardware Crypto AES-256 —
RoHS स्थिति Compliant Compliant
External SMPS Yes (integrated SMPS step-down converter) —
Performance — 100 DMIPS (1.25 DMIPS/MHz)
Program Flash Memory — 512 KB
I/O Pins — 51 (5V-tolerant on FT pins)
ADC — 3x 12-bit, up to 5 Msps
DAC — 2x 12-bit
Comparators — 2x ultra-low-power
Operational Amplifiers — 2x on-chip
USB — USB 2.0 Full-Speed OTG (with internal PHY)
LCD Controller — 8x40 / 4x44 segments
Timers — 16-/32-bit, RTC, LPTIM, SysTick
Communication Interfaces — USART/UART, I2C, SPI, SAI, CAN 2.0B, SDMMC
Crypto / Random — AES-256 hardware, TRNG
DMA — DMA1 + DMA2 (14 channels total)
Internal SMPS — Yes (external 4.7 uH inductor)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध