TCA9555PWR vs TCA9535PWR तुलना
विस्तृत दोनों ओर की तुलना TCA9555PWR द्वारा Texas Instruments और TCA9535PWR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | TCA9555PWR | TCA9535PWR |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| फ़ंक्शन | 16-bit I2C/SMBus I/O expander | — |
| Number of I/O | 16 | — |
| इंटरफ़ेस | I2C, SMBus | — |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 400 kHz (TI) / 1 MHz (UMW second-source) | — |
| I2C Address Pins | 3 (A0, A1, A2) - up to 8 devices per bus | — |
| Interrupt Output | Yes, active-low open-drain INT | 1 interrupt output |
| Configuration Registers | Yes (direction, polarity, mask) | 2 configuration registers |
| Weak Pull-up Resistors | Programmable per port | — |
| Supply Voltage (VCC) | 1.65 V to 5.5 V | — |
| Output Current per Bit | -25 mA to +25 mA (sink/source) | — |
| I/O Voltage Tolerance | 5 V tolerant | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | — |
| पैकेज | 24-pin TSSOP (PW) | 24-pin TSSOP (PW) |
| माउंटिंग प्रकार | Surface Mount | Surface mount |
| MSL स्तर | 1 (260 C, unlimited floor life per JEDEC J-STD-020) | — |
| RoHS स्थिति | Compliant | — |
| REACH | Compliant | — |
| Product Type | — | 16-bit I2C/SMBus I/O expander |
| Number of I/O Pins | — | 16 pins |
| Number of Ports | — | 2 ports of 8 bits |
| ऑपरेटिंग सप्लाई वोल्टेज | — | 1.65 V to 5.5 V |
| Serial Bus | — | I2C and SMBus |
| Maximum I2C Bus Frequency | — | 400 kHz |
| Interface Pins | — | 2-wire bidirectional bus |
| Polarity Inversion Registers | — | 2 polarity-inversion registers |
| Input Configuration | — | High-impedance input mode |
| आउटपुट कॉन्फ़िगरेशन | — | Independently configurable per port bit |
| ऑपरेटिंग तापमान रेंज | — | [DATA_NEEDED: operating temperature range] |
| क्वाइसेंट करंट | — | [DATA_NEEDED: quiescent current] |
| Output Current per Pin | — | [DATA_NEEDED: output current per pin] |
| I2C Slave Address | — | [DATA_NEEDED: I2C slave address] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |