THS4141CD vs THS4141ID तुलना
विस्तृत दोनों ओर की तुलना THS4141CD द्वारा Texas Instruments और THS4141ID द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
THS4141CD - 160MHz Fully Differential Amplifier | Texas Instruments
THS4141CD ✓ सक्रियTexas Instruments
THS4141ID - 160MHz Fully Differential Amplifier | Texas Instruments
THS4141ID ✓ सक्रियविशेषता तुलना
| पैरामीटर | THS4141CD | THS4141ID |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | Fully Differential Input/Output High Slew Rate Amplifier | Fully differential input/differential output amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| -3 dB Bandwidth | 160 MHz at VCC = ±15 V | 160 MHz at ±15 V |
| Slew Rate | 450 V/us | 450 V/us |
| Input-Referred Noise | 6.5 nV/Hz | 6.5 nV/Hz |
| Third-Harmonic Distortion | -79 dB at 1 MHz | -79 dB at 1 MHz |
| Input Architecture | Differential input | — |
| Output Architecture | Differential output | — |
| Common-Mode Noise Rejection | Supported by balanced fully differential architecture | Balanced outputs reject common-mode noise |
| सप्लाई वोल्टेज | ±16.5 V maximum per distributor specification listing | — |
| Total Supply Voltage | 33 V maximum per distributor specification listing | — |
| ऑपरेटिंग तापमान | 0°C to 70°C | — |
| पैकेज | 8-pin SOIC (D) | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| Process Technology | BiComI complementary bipolar process | Complementary bipolar BiComI process |
| Differential ADC Driver Application | Supported | — |
| Differential Antialiasing Application | Supported | — |
| Single-Ended to Differential Conversion | Supported | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Input Offset Voltage | — | 7 mV |
| Gain Tolerance | — | 1 dB |
| ऑपरेटिंग तापमान रेंज | — | -40 °C to +85 °C |
| Supply Condition for Bandwidth | — | ±15 V |
| Signal-Path Architecture | — | True differential input-to-differential output |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |