TLD1310ELXUMA1 vs TLD5097EPXUMA1 तुलना

विस्तृत दोनों ओर की तुलना TLD1310ELXUMA1 द्वारा Infineon और TLD5097EPXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
TLD1310ELXUMA1 TLD1310ELXUMA1 - 3-Ch 120mA LED Driver LITIX Basic | Infineon

TLD1310ELXUMA1 - 3-Ch 120mA LED Driver LITIX Basic | Infineon

TLD1310ELXUMA1 ✓ सक्रिय
Infineon
TLD5097EPXUMA1 TLD5097EPXUMA1 - 45V Multi-Topology LED DC-DC Controller | Infineon

TLD5097EPXUMA1 - 45V Multi-Topology LED DC-DC Controller | Infineon

TLD5097EPXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर TLD1310ELXUMA1 TLD5097EPXUMA1
ब्रांड Infineon Infineon
श्रेणी LED Drivers LED Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
टोपोलॉजी Linear High-Side Current Source —
Number of Channels 3 —
Output Current per Channel 120 mA (max) —
Total Output Current 360 mA (sum of all channels) —
Supply Voltage Range 5.5 V to 40 V —
Supported Bus Voltages 9 V / 12 V / 15 V / 18 V / 24 V (automotive) —
Dimming Method Analog and Digital (PWM via EN/PWM pin) Analog and PWM
पैकेज PG-SSOP-14-5 (14-pin SSOP with exposed pad) PG-TSDSO-14 (14-TSSOP with exposed pad)
ऑपरेटिंग तापमान रेंज -40 °C to +150 °C (junction) -40 C to +150 C
AEC-Q100 Qualification Yes (Automotive Grade) —
Current Accuracy [DATA_NEEDED: typical current accuracy %] —
ड्रॉपआउट वोल्टेज [DATA_NEEDED: typical dropout voltage] —
माउंटिंग प्रकार Surface Mount Surface Mount
MSL स्तर 3 —
RoHS स्थिति Compliant Compliant
Diagnostic Features Open-load, Short-to-ground, Over-temperature —
Product Family LITIX Basic —
Topology Support — Boost, Buck, Buck-Boost, SEPIC, Flyback
इनपुट वोल्टेज रेंज — 4.5 V to 45 V
Switching Frequency Range — 100 kHz to 500 kHz
Gate Drive Output Current — 90 mA
आउटपुट की संख्या — 1
LED Current Tolerance — 3.3%
Internal Switch — No (external MOSFET driver)
Short Circuit Protection — Yes
Open LED Detection — Yes
Over-Temperature Protection — Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध