TLD5190QVXUMA1 vs TLD5097EPXUMA1 तुलना

विस्तृत दोनों ओर की तुलना TLD5190QVXUMA1 द्वारा Infineon और TLD5097EPXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
TLD5190QVXUMA1 TLD5190QVXUMA1 - 55V H-Bridge DC-DC LED Controller | Infineon

TLD5190QVXUMA1 - 55V H-Bridge DC-DC LED Controller | Infineon

TLD5190QVXUMA1 ✓ सक्रिय
Infineon
TLD5097EPXUMA1 TLD5097EPXUMA1 - 45V Multi-Topology LED DC-DC Controller | Infineon

TLD5097EPXUMA1 - 45V Multi-Topology LED DC-DC Controller | Infineon

TLD5097EPXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर TLD5190QVXUMA1 TLD5097EPXUMA1
ब्रांड Infineon Infineon
श्रेणी LED Drivers LED Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
टोपोलॉजी Synchronous H-Bridge (Buck / Boost / Buck-Boost DC-DC Controller) —
इनपुट वोल्टेज रेंज 4.5 V to 40 V (load-dump tolerant up to 55 V transient) 4.5 V to 45 V
आउटपुट वोल्टेज रेंज 2 V to 55 V —
अधिकतम आउटपुट करंट [DATA_NEEDED: depends on external MOSFETs] —
स्विचिंग फ्रीक्वेंसी 200 kHz to 700 kHz (programmable) —
Peak Efficiency 96% —
Dimming Interface Analog (0-100%) and PWM Dimming —
Spread-Spectrum Frequency Modulation Yes (SSFM, EMI reduction) —
Control Architecture Peak Current Mode with slope compensation —
Gate Drivers Integrated high-side + low-side for 4 external MOSFETs (H-bridge) —
पैकेज VQFN-48 (PG-VQFN-48-31) with exposed thermal pad, 7x7 mm PG-TSDSO-14 (14-TSSOP with exposed pad)
AEC-Q100 Qualification Qualified (automotive grade) —
ऑपरेटिंग तापमान रेंज -40 C to +150 C (junction) -40 C to +150 C
Protections Open-LED, short-to-GND, short-to-Battery, overtemperature, overcurrent —
MSL स्तर 3 (per JEDEC J-STD-020) —
माउंटिंग प्रकार Surface Mount Surface Mount
RoHS स्थिति Compliant Compliant
Family LITIX Power (Infineon automotive LED driver family) —
Topology Support — Boost, Buck, Buck-Boost, SEPIC, Flyback
Switching Frequency Range — 100 kHz to 500 kHz
Gate Drive Output Current — 90 mA
आउटपुट की संख्या — 1
Dimming Method — Analog and PWM
LED Current Tolerance — 3.3%
Internal Switch — No (external MOSFET driver)
Short Circuit Protection — Yes
Open LED Detection — Yes
Over-Temperature Protection — Yes

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध