UCC21530 vs UCC21520Q-Q1 तुलना
विस्तृत दोनों ओर की तुलना UCC21530 द्वारा Texas Instruments और UCC21520Q-Q1 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
UCC21520Q-Q1 - 4A/6A 5.7kVRMS Isolated Dual Gate Driver | TI
UCC21520Q-Q1 ✓ सक्रियविशेषता तुलना
| पैरामीटर | UCC21530 | UCC21520Q-Q1 |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| चैनल | 2 (isolated dual-channel) | — |
| Peak Output Current (Source) | 4 A | — |
| Peak Output Current (Sink) | 6 A | — |
| Isolation Type | Capacitive, reinforced | — |
| Isolation Rating | 5700 Vrms | 5.7 kVRMS (reinforced) |
| CMTI (Common-Mode Transient Immunity) | 125 V/ns minimum | — |
| Max Switching Frequency | 5 MHz | — |
| Channel-to-Channel Spacing | 3.3 mm | — |
| इनेबल पिन | Yes | — |
| Programmable Dead Time | Yes (DT pin) | — |
| UVLO | Yes, input and output sides | Yes, on all supply pins (8-V UVLO variant) |
| Target Power Devices | IGBT, Si MOSFET, SiC MOSFET | Power MOSFETs, IGBTs, SiC MOSFETs |
| Propagation Delay | [DATA_NEEDED: propagation delay typ] | [DATA_NEEDED: typical propagation delay value] |
| पैकेज | SOIC-14 (DWK), surface mount | 16-SOIC wide-body (DWQ), surface mount |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Supply Voltage (VDD) | [DATA_NEEDED: VDD range] | — |
| RoHS स्थिति | Compliant | Compliant |
| आउटपुट कॉन्फ़िगरेशन | — | Dual-channel isolated gate driver |
| Peak Source Current | — | 4 A |
| Peak Sink Current | — | 6 A |
| Isolation Technology | — | Capacitive (SiO2) |
| CMTI | — | 125 V/ns minimum |
| Maximum Switching Frequency | — | 5 MHz |
| Input Threshold | — | TTL and CMOS compatible, independent of VDD |
| Control Pins | — | INA, INB, DIS (disable) |
| Automotive Qualification | — | AEC-Q100 (Q1) |