VNI4140K-32 vs VNQ500PEPTR-E तुलना

विस्तृत दोनों ओर की तुलना VNI4140K-32 द्वारा STMicroelectronics और VNQ500PEPTR-E द्वारा STMicroelectronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

STMicroelectronics
VNI4140K-32 VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics

VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics

VNI4140K-32 ✓ सक्रिय
STMicroelectronics
VNQ500PEPTR-E VNQ500PEPTR-E - 4-Ch High-Side 36V Driver | STMicroelectronics

VNQ500PEPTR-E - 4-Ch High-Side 36V Driver | STMicroelectronics

VNQ500PEPTR-E ✓ सक्रिय

विशेषता तुलना

पैरामीटर VNI4140K-32 VNQ500PEPTR-E
ब्रांड STMicroelectronics STMicroelectronics
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type Quad high-side smart power solid-state relay —
Number of Channels 4 —
टोपोलॉजी High-side switch (N-channel MOSFET) Quad High-Side Power Switch / Driver
Load Current per Channel 1.0 A (continuous) —
On-State Resistance (RDS(on)) 0.08 ohm per channel —
Supply Voltage (VCC) Max 41 V —
आउटपुट कॉन्फ़िगरेशन 1:1 N-Channel 1:1 N-Channel high-side
आउटपुट की संख्या 4 4
Diagnostics Per-channel open-load, short-to-ground, thermal fault —
Inductive Load Handling Fast demagnetization (integrated) —
Logic Input Compatibility CMOS/TTL compatible logic inputs CMOS/TTL
पैकेज PowerSSO-24 (24-pin with exposed thermal pad) PowerSSO-12 (PowerLSOP with exposed pad)
Package Width 7.50 mm (approximately 0.295 inch) —
माउंटिंग प्रकार Surface Mount Surface Mount
Industrial Standard Compliance IEC 61131-2 —
ESD Rating 25 kV (per IEC standard, air discharge) —
Technology ST VIPower (vertical DMOS + CMOS/bipolar control) ST VIPower M0-3
इनपुट वोल्टेज रेंज — 5.5 V to 36 V
Continuous Output Current (per channel) — 400 mA
On-Resistance (Ron, typ.) — 0.5 ohm
Load Type — Any load with one side connected to ground
Protection Features — Current limit, thermal shutdown, ESD
Operating Temperature (Tj) — -40C to +150C
Automotive Qualification — AEC-Q100 qualified
RoHS स्थिति — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध