AD50643-2 Precision Buffered Voltage DAC | Analog Devices
MPN: AD50643-2 ✓ सक्रियAD50643-2 अवलोकन
A voltage-output DAC is a data-conversion component that converts a digital code into a proportional analog voltage. It belongs to the broader DAC, data-converter, and analog signal-chain hierarchy. An external or internal reference defines the full-scale output range, while the output buffer provides a low-impedance drive for subsequent analog circuitry. This makes buffered voltage-output DACs useful when a control, measurement, or excitation signal must be generated directly from digital data.
The AD5064 family provides dedicated reference pins for most models, with the AD5064-1 serving as the noted single-reference-pin exception. Each buffered DAC channel supports independent reference routing where the model configuration permits it. The 1 LSB INL and 1 LSB DNL specifications are significant because they limit departures from an ideal linear transfer function, helping preserve calibration accuracy in instrumentation, automated test, and industrial control systems.
Each supported member of the family operates from 4.5 V to 5.5 V. According to the Analog Devices AD5024/AD5044/AD5064 data sheet, the reference input range is 2.2 V to the supply voltage, and the reference is buffered internally for the DAC core. This architecture supports independent channel-level scaling when individual reference pins are used. The internal output buffer then presents a low-impedance analog voltage suitable for driving the next stage in a precision signal chain.
Typical family applications include programmable instrumentation, industrial process control, automated test equipment, data acquisition, laboratory equipment, and low-level analog signal generation. In each case, the principal design goals are code-to-voltage accuracy, reference stability, supply compatibility, and a sufficiently low output impedance. The AD50643-2 is particularly relevant where its exact resolution, temperature grade, and channel configuration match the required system specification.
Circuit implementation should preserve reference and supply stability because reference variation directly affects the analog output. Place bypass capacitance close to the supply and reference pins, route analog and digital signals carefully, and avoid loading the buffered output beyond its specified operating conditions. The 522BD package also requires thermal verification under worst-case ambient temperature and output-voltage conditions.
This product page combines the manufacturer's family-level electrical information with sourcing guidance, comparison points, practical implementation notes, and verified package references. It is intended to help engineers determine whether the AD50643-2 belongs in a precision voltage-generation design before requesting a quote or beginning board-level qualification.
के लिए ड्रॉप-इन विकल्प AD50643-2 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंAD50643-2 Maximum Ratings और Electrical Characteristics
| Product Type | Buffered voltage-output digital-to-analog converter |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Reference Input Range | 2.2 V to VDD |
| Relative INL | 1 LSB |
| Relative DNL | 1 LSB |
| Output Architecture | Buffered voltage output |
| Reference Buffering | Internally buffered |
| Reference Configuration | Dedicated reference pin for most family models; AD5064-1 uses one shared reference pin |
| Operating Supply | Single supply |
| पैकेज | 522BD |
| माउंटिंग प्रकार | Surface-mount integrated circuit |
AD50643-2 522bd पिन कॉन्फ़िगरेशन गाइड
AD50643-2 (522bd पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD50643-2.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
AD50643-2 के लिए उपयुक्त है 6 अनुप्रयोगs: Precision Instrumentation Signal Generation, Industrial Process Control, Automated Test Systems, Data Acquisition Systems, Low-Level Analog Signal Generation, Laboratory Control and Calibration.
Precision Instrumentation Signal Generation
The AD50643-2 can generate controllable analog excitation voltages for laboratory instruments, measurement front ends, and calibration equipment. Its AD5064-family architecture provides a buffered voltage output with relative INL and DNL specified at 1 LSB, helping preserve the intended code-to-voltage relationship across the programmed range. The 4.5 V to 5.5 V single-supply operation also simplifies systems that already support a 5 V analog rail. Reference accuracy remains a major contributor to end-to-end error, so the reference source, bypass network, and output path should be designed as one precision analog subsystem.
अनुशंसित
Industrial Process Control
The AD50643-2 is appropriate for industrial control systems that require a digital command to be translated into a stable analog output for an actuator, analog sensor interface, or downstream control stage. The family's 1 LSB relative DNL and 1 LSB relative INL specifications help limit code-dependent gain and linearity errors, while the internal reference buffer supports predictable DAC-core operation. With a 4.5 V to 5.5 V supply range, the device can support 5 V industrial analog sections. Final selection should confirm output range, settling behavior, isolation requirements, and the operating temperature grade of the exact ordering configuration.
अनुशंसित
Automated Test Systems
AD50643-2-based circuits can create programmable voltage stimuli in automated production and acceptance-test equipment. The buffered output provides a low-impedance source for downstream measurement circuitry, while the family's 1 LSB relative linearity specifications support accurate stimulus generation across programmed codes. The single 4.5 V to 5.5 V supply range can simplify 5 V test electronics, but system timing, settling, glitch behavior, and reference drift must be checked against the measurement bandwidth. A dedicated reference strategy and careful grounding are especially important when small analog errors directly affect test limits.
अनुशंसित
Data Acquisition Systems
The AD50643-2 can serve as a controllable source in data-acquisition systems that need analog excitation, simulation, or calibration alongside measured inputs. Its buffered voltage-output architecture is suited to driving acquisition circuitry when the selected channel count and settling characteristics meet the sampling requirement. The 1 LSB INL and 1 LSB DNL family specifications help keep excitation errors predictable, while reference input can range from 2.2 V to VDD. Designers should compare conversion settling with the acquisition sample rate and include reference and supply bypass components close to the device.
अनुशंसित
Low-Level Analog Signal Generation
The AD50643-2 is suitable for low-level control and signal-generation paths where code-to-voltage linearity is more important than throughput. The AD5064 family's relative INL and DNL of 1 LSB establish a precise linearity baseline, and the buffered output helps isolate the DAC core from the load presented by the next circuit. The 2.2 V to VDD reference range allows the output scale to follow the system reference. Designers should pay particular attention to reference noise, output settling, ground return paths, and any downstream gain stage when extending this small signal.
अनुशंसित
Laboratory Control and Calibration
The AD50643-2 can support programmable laboratory controls, source-measurement fixtures, and calibration systems that require repeatable voltage commands. Its buffered output is useful when the generated voltage must drive another instrument or analog module, and the family's 1 LSB relative INL and DNL specifications provide a defined linearity basis for calibration records. The 4.5 V to 5.5 V single-supply range simplifies integration with conventional 5 V laboratory circuits. Before deployment, verify the exact resolution, output range, temperature behavior, and settling time against the intended calibration bandwidth.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा AD50643-2 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Brand | Analog Devices |
| Package | 522BD |
| Product Type | Buffered voltage-output DAC |
| Supply Voltage Range | 4.5 V to 5.5 V |
| Reference Input Range | 2.2 V to VDD |
| Relative INL | 1 LSB |
| Relative DNL | 1 LSB |
| Reference Buffering | Internal |
| Output Architecture | Buffered voltage output |
मुख्य विशेषताएँ
- Family-level buffered voltage output (बनामAD5064-1)
- Single-supply compatibility (बनामAD504SH)
- Defined family linearity baseline (बनामAD506JH)
डिज़ाइन नोट्स
Decouple the 4.5 V to 5.5 V analog supply close to the device with the capacitance and placement specified by the manufacturer data sheet. Keep the reference path separate from noisy digital return currents, and treat reference stability as part of the DAC error budget. A 2.2 V reference can operate near the lower end of the 2.2 V to VDD input range, while a reference near VDD requires careful headroom assessment.
Route reference and analog-output traces away from high-current switching nodes and digital interface return currents. Use a compact ground path beneath the device where the package land pattern permits it, and place input bypass components adjacent to their associated pins. The buffered output reduces loading sensitivity, but trace resistance and coupling can still affect accuracy and settling in precision measurement paths.
Do not select a substitute solely because it is also called a nanoDAC. Confirm the 522BD footprint, exact pin functions, supply range, resolution, reference configuration, temperature grade, and output settling behavior. Most AD5064 family members have dedicated reference pins, while AD5064-1 uses a single shared reference; treating these configurations as interchangeable can produce scaling or routing errors.
अनुपालन जानकारी
No explicit compliance declarations for the exact AD50643-2 ordering configuration were identified in the manufacturer family page, family data sheet, or distributor records.