अंतिम बार खरीदने की सूचना: AD9223ARS end-of-life के करीब है। अंतिम ऑर्डर तिथि: हमसे संपर्क करें. उपलब्ध वैकल्पिक पार्ट्स देखें →
Analog Devices

AD9223ARS - 12-Bit 3 MSPS Parallel ADC | Analog Devices

MPN: AD9223ARS ⚠ अंतिम खरीद
5 V Vdss 28-pin SSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD9223ARS अवलोकन

Analog Devices AD9223ARS is a 12-bit, single-channel, pipelined analog-to-digital converter designed for sampling at up to 3.0 MSPS with a parallel digital output. The converter operates from a 5 V supply and is packaged in a 28-pin SSOP tube. Analog Devices lists the AD9223 family as LAST TIME BUY, so new production demand should be planned carefully and existing designs should be reviewed for lifecycle risk.

An ADC is an interface IC that converts a continuously varying analog voltage into a numeric code for processing by a digital system. The AD9223 belongs to the ADC and DAC hierarchy, with a pipelined conversion architecture, parallel data interface, and 12-bit resolution. This combination makes it appropriate for industrial instrumentation, communications, waveform capture, and control systems that require deterministic sampling and digital data transfer without a high-speed serial link.

The key specifications are 12-bit resolution, a 3.0 MSPS maximum sampling rate, a single analog input, and a 5 V supply. The family documentation also identifies 1.5 MSPS and 10.0 MSPS operation modes across the AD9223 device family, while the AD9223ARS is identified specifically as the 3.0 MSPS parallel-output version. Its parallel interface exposes the conversion result directly through dedicated digital output pins rather than serializing it over a clocked data lane.

The pipelined architecture allows multiple conversion stages to operate concurrently, supporting throughput above the latency of a single-stage converter. Engineers should treat clock quality, input settling, reference stability, and output timing as coupled considerations. Because the converter operates from a single 5 V supply, its input and reference circuitry must stay within the absolute maximum ratings specified in the manufacturer data sheet. The 28-pin SSOP also requires careful assembly planning because its lead pitch is narrower than that of many SOIC packages.

Typical uses include digital oscilloscope and oscilloscope-class front ends, communication receivers, industrial measurement systems, ultrasound-related signal acquisition, and embedded control loops. The 12-bit code width provides 4096 possible digital output levels, while the parallel bus simplifies interfacing to suitably rated digital logic, FPGA input registers, or dedicated data-capture circuitry.

When laying out the circuit, place the decoupling capacitors and the analog input conditioning network close to their associated pins, and route high-speed digital output traces away from the sensitive analog input. Use the pin-description table and recommended application circuit in the Analog Devices data sheet when assigning land patterns and confirming timing relationships.

This product page combines lifecycle information, package details, family pin-compatibility information, and practical design guidance for engineers evaluating the AD9223ARS. It also distinguishes the exact ordering code from related suffix variants and identifies the limits of available drop-in replacement options.

के लिए ड्रॉप-इन विकल्प AD9223ARS — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

AD9223ARSZ

✅ ड्रॉप-इन
📦 SSOP-28
Retains 12-bit resolution, 3.0 MSPS sampling, 5 V operation, and the 28-pin SSOP interface; suffix-specific ordering and temperature options must be checked.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD9223ARZ

✅ ड्रॉप-इन
📦 SSOP-28
Retains the 12-bit, single-input, pipelined parallel ADC architecture and 28-pin package arrangement; exact sampling and suffix-specific limits must be checked.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD9223ARS Maximum Ratings और Electrical Characteristics

Converter Type Single-channel pipelined ADC
रेज़ोल्यूशन 12 bit
Maximum Sampling Rate 3.0 MSPS
Analog Input Count 1 input
Digital Interface 12-bit parallel output
सप्लाई वोल्टेज 5 V
पैकेज 28-pin SSOP
Package Type 28-pin SSOP
माउंटिंग प्रकार Surface mount
Packaging Tube
Product Lifecycle LAST TIME BUY

AD9223ARS 28-pin ssop पिन कॉन्फ़िगरेशन गाइड

AD9223ARS (28-pin ssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AD9223ARS के लिए 28-pin ssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD9223ARS.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD9223ARS के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Data Acquisition, Digital Oscilloscope Front End, Communications Receiver, Embedded Control and Monitoring, Ultrasound Signal Acquisition, Waveform and Pulse Capture.

🏭

Industrial Data Acquisition

The AD9223ARS fits industrial measurement systems that sample a conditioned analog sensor signal at up to 3.0 MSPS and require a 12-bit result. Its parallel output can feed a capture register or FPGA interface without adding a serial transceiver, while the 5 V supply simplifies integration with conventional analog and digital supply rails. The principal design constraint is maintaining accurate input settling, stable clocking, and clean reference behavior. Place input conditioning and decoupling close to the converter, and validate full-scale operation, code linearity, and noise at the intended input bandwidth before production release.

📺

Digital Oscilloscope Front End

The AD9223ARS can serve as the acquisition converter in a digital oscilloscope or oscilloscope-class instrument sampling repetitive waveforms at 3.0 MSPS. Its 12-bit parallel output provides a direct numerical representation of the input, while the pipelined architecture supports practical conversion throughput. Signal integrity remains central: the amplifier, attenuator, and anti-alias network must settle within the converter's acquisition interval, and clock jitter must remain compatible with the desired frequency-domain performance. A controlled layout and repeatable input reference are essential for repeatable waveform measurements.

🌐

Communications Receiver

The AD9223ARS is appropriate for communications receiver paths that need a 3.0 MSPS, 12-bit conversion stage and can use a parallel digital interface. Parallel data is useful when downstream logic, a field-programmable gate array, or a high-speed capture register already exists nearby. The RF or baseband designer must still control analog gain, bandwidth, filter response, and clock quality because the converter cannot recover information lost in the analog chain. Verify the complete signal chain against the manufacturer data sheet, particularly input range, settling behavior, and timing margins.

🔧

Embedded Control and Monitoring

The AD9223ARS can provide a 12-bit measurement channel in an embedded monitoring system where analog variables must be observed with more resolution than a simple comparator or low-resolution converter offers. Its 3.0 MSPS capability is useful for tracking dynamic control signals, vibration envelopes, or process variables after conditioning. A parallel bus may require careful partitioning between the converter and digital controller, so account for data capture latency and bus timing. Stable 5 V decoupling, a low-noise reference arrangement, and careful separation of analog and digital return currents will improve measurement repeatability.

💊

Ultrasound Signal Acquisition

The AD9223ARS can be evaluated for ultrasound or medical-instrument signal-acquisition modules that require a 12-bit parallel ADC at up to 3.0 MSPS. The converter's resolution and throughput are useful for capturing processed analog channels, although system-level performance depends on the transducer amplifier, time-gain control, protection network, and anti-alias filtering. The analog front end must maintain the correct signal level and settling time throughout each acquisition interval. Medical designs also require separate application-specific safety, quality, and regulatory validation beyond the electrical requirements of the converter.

⚡

Waveform and Pulse Capture

The AD9223ARS suits instrumentation that captures transient analog events through a 3.0 MSPS sampling path and stores or processes 12-bit parallel data. The pipelined converter can support repeated acquisition, but designers must account for acquisition latency, trigger timing, input bandwidth, and the settling of the source amplifier. Use the clock and data-capture timing from the manufacturer data sheet to establish a coherent sampling relationship. Short analog traces, local reference and bypass capacitors, and a deliberate ground partition help preserve the sampled waveform's amplitude accuracy.

अनुशंसित उत्पादों का सारांश

AD9223ARS Analog Devices उपयोग में: Industrial Data Acquisition, Digital Oscilloscope Front End, Communications Receiver, Embedded Control and Monitoring, Ultrasound Signal Acquisition, Waveform and Pulse Capture AD9223ARSZ Closely related parallel-output ADC उपयोग में: Industrial Data Acquisition, Embedded Control and Monitoring AD9220ARSZ Pin-compatible ADI family member उपयोग में: Digital Oscilloscope Front End, Waveform and Pulse Capture AD9223ARZ Related 12-bit parallel ADC उपयोग में: Communications Receiver AD9221ARSZ Pin-compatible ADI ADC family member उपयोग में: Ultrasound Signal Acquisition
What is the AD9223ARS?
The AD9223ARS is a 12-bit, single-channel, pipelined analog-to-digital converter with a 3.0 MSPS sampling rate and parallel digital output. According to the Analog Devices AD9223 data sheet, it operates from a 5 V supply and is offered in a 28-pin SSOP package. It is intended for applications that convert an analog input into 12-bit digital data for acquisition, communications, instrumentation, or control systems.
What is the sampling rate of the AD9223ARS?
The AD9223ARS samples at up to 3.0 MSPS, meaning it can complete approximately three million conversions each second under its specified operating conditions. The Analog Devices AD9223 data sheet identifies the converter as a 12-bit parallel-output ADC. Clock frequency, signal bandwidth, acquisition timing, and digital-interface timing must be evaluated together rather than treating the conversion rate as a complete system-throughput specification.
Is the AD9223ARS still in production?
No, Analog Devices lists the AD9223 family as LAST TIME BUY. The AD9223ARS should therefore be treated as a constrained legacy product rather than a standard new-design choice. Use the Request a Quote form on this page to confirm current availability, minimum order quantity, and delivery scheduling. For new designs, compare the lifecycle and performance of current ADC families before committing the board layout.
Where can I download the AD9223ARS datasheet PDF?
The official AD9223 documentation is available from Analog Devices through the product page and linked data sheet resources. The device data sheet contains the authoritative pin description, absolute maximum ratings, timing definitions, electrical characteristics, and recommended application circuits. Use the manufacturer data sheet rather than a distributor summary when assigning PCB nets, setting clocks, or checking the 12-bit parallel output and analog input requirements.
Where can I find the AD9223ARS pinout?
The AD9223ARS pinout is shown in the pin-description table and package drawing of the Analog Devices AD9223 data sheet. The converter uses a 28-pin SSOP package and includes analog, digital-output, clock, power, and control connections that must be assigned exactly as documented. Use the manufacturer pin table when creating the schematic and land pattern, especially when comparing suffix variants with different ordering or temperature options.
What is the AD9223ARS output resolution?
The AD9223ARS provides 12-bit digital output, corresponding to 4,096 possible code levels for each conversion. The Analog Devices AD9223 data sheet describes true 12-bit linearity and AC performance of 11.5 bits or better under applicable conditions. Effective system accuracy also depends on analog-front-end conditioning, reference stability, clock quality, grounding, and the time allowed for the input to settle.
What can replace the AD9223ARS?
The closest documented drop-in choices are AD9223ARSZ and AD9223ARZ, which retain the 12-bit parallel ADC architecture and 28-pin package arrangement while differing in ordering or temperature-related options. Before replacement, compare the exact suffix, temperature range, electrical limits, timing, and availability. Use the Request a Quote form on this page to confirm lifecycle status and sourcing for the required suffix.
Is the AD9223ARS the same as the AD9223ARSZ?
The AD9223ARS and AD9223ARSZ are closely related 12-bit, 3.0 MSPS parallel converters in the 28-pin SSOP family, but their suffix options can differ in environmental, ordering, or lead-free status. According to Analog Devices, the AD9221, AD9223, and AD9220 share the same package, interface options, and pinout. Even with a matching footprint, engineers should verify every electrical limit and temperature grade before substitution.
AD9223ARS vs AD9223ARSZ: which is better for an industrial design?
The AD9223ARS is the target 12-bit, 3.0 MSPS parallel converter in a 28-pin SSOP tube, while AD9223ARSZ is the closely related lead-free ordering option. The better choice depends on the required temperature range, compliance obligations, production quantity, and current lifecycle rather than conversion speed, because both are identified as 3.0 MSPS 12-bit parallel devices. Verify the exact suffix characteristics in the manufacturer data sheet.
When should I choose the AD9223ARS over another ADC?
Choose the AD9223ARS when an existing design requires a 5 V, 12-bit parallel-output ADC capable of 3.0 MSPS in a 28-pin SSOP and its LAST TIME BUY status has been accepted. It is less suitable for new platforms where long-term availability, smaller package area, lower power, or a modern serial interface is important. For those cases, evaluate a current ADC family rather than assuming that a footprint-compatible legacy converter is the lowest-risk choice.
Is the AD9223ARS suitable for communications and signal acquisition?
The AD9223ARS can suit moderate-bandwidth communications and signal-acquisition systems because it provides 12-bit resolution at up to 3.0 MSPS through a parallel interface. Suitability depends on the required analog bandwidth, noise and distortion limits, clock-jitter tolerance, and downstream digital capture capability. According to the Analog Devices AD9223 data sheet, the converter is part of a family offering true 12-bit linearity and 11.5-bit-or-better AC performance under applicable conditions.
How should the AD9223ARS analog input be connected?
The analog input should be driven through a conditioning network that provides the required input range, impedance, bandwidth, and settling time. According to the Analog Devices AD9223 data sheet, the converter is a 5 V, single-input device, so the amplifier or driver must not exceed the documented common-mode and absolute-maximum limits. Place the input network and decoupling close to the device, and use the recommended application circuit as the basis for a new design.
Does the AD9223ARS require special PCB layout for its parallel output?
Yes, the AD9223ARS needs careful routing because it combines a sensitive analog input with a 12-bit parallel digital output in a narrow-pitch 28-pin SSOP. Keep the analog path short, place decoupling close to the supply pins, and route high-speed clock and output signals away from the input and reference network. Use the package drawing in the manufacturer data sheet to preserve the documented pin orientation and land pattern.
What is the power and thermal requirement for the AD9223ARS?
The AD9223ARS operates from a 5 V supply, but its complete power budget depends on the supply current, clock rate, digital output state, and ambient conditions. Consult the Analog Devices AD9223 data sheet for the specified supply-current limits, absolute maximum ratings, and package information before calculating dissipation. Provide local ground-plane area and stable 5 V decoupling, and verify the final junction-temperature margin in the assembled design.
How can I check AD9223ARS stock, price, and lead time?
Use the Request a Quote form on this page to request current AD9223ARS stock, unit pricing, minimum order quantity, and production lead time. Because Analog Devices classifies the AD9223 family as LAST TIME BUY, availability may be constrained and should be confirmed before committing a delivery schedule. Do not rely on an archived listing as confirmation of current stock, and provide the exact AD9223ARS ordering code with your request.

के लिए इंजीनियरिंग संदर्भ डेटा AD9223ARS — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AD9223ARS when maintaining an existing 28-pin SSOP design requires a 12-bit parallel ADC operating at 3.0 MSPS from a 5 V supply. Choose AD9223ARSZ when the closely related suffix satisfies the required ordering, temperature, and lead-free conditions while retaining the same core resolution, speed, interface, and package. Consider AD9223ARZ only after checking its exact electrical ratings, timing, temperature range, and lifecycle status. Because the AD9223 family is LAST TIME BUY, the target is best suited to controlled continuation or repair of existing equipment. For a new design, a current ADC family may provide better lifecycle assurance, lower power, a smaller footprint, or a simpler serial interface, but it will normally require a different PCB layout and careful signal-chain redevelopment.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD9223ARSZ AD9223ARZ
Brand Analog Devices Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP 28-pin SOIC/SSOP
Resolution 12 bit 12 bit 12 bit
Converter Architecture Pipelined Pipelined Pipelined
Digital Interface 12-bit parallel output 12-bit parallel output Parallel output
Analog Input Count 1 input 1 input 1 input

मुख्य विशेषताएँ

  • Exact 3.0 MSPS ordering configuration (बनामAD9223ARZ)
  • Directly documented 5 V operation (बनामAD9223ARZ)
  • Established 28-pin SSOP package for the target suffix (बनामAD9223ARSZ)

डिज़ाइन नोट्स

Use the Analog Devices package drawing to create the 28-pin SSOP land pattern and confirm the lead pitch and pin-1 orientation before releasing Gerber files. Place the supply bypass capacitors adjacent to their associated power pins, connect the analog return to a quiet ground region, and route the 12-bit output bus away from the analog input and reference traces. SSOP assembly also requires inspection because the closely spaced leads can be difficult to inspect visually.

Treat the clock, analog input, reference, and digital outputs as one coupled high-speed system. Use short traces for clock and data nets, provide a continuous return path beneath the bus, and avoid stubs or unnecessary test-pad structures on sensitive nets. The source amplifier must settle within the converter's acquisition interval, and the input filter must preserve the intended bandwidth. Verify timing with realistic board parasitics rather than relying only on schematic-level calculations.

Provide a stable 5 V rail and place local high-frequency bypass capacitance at the power pins with additional bulk decoupling near the analog section. Separate noisy digital return currents from the analog reference and input ground path. Because the converter's operating current can vary with clock rate and output-code activity, use the maximum current and thermal limits stated in the manufacturer data sheet when sizing the regulator and copper area.

Do not substitute an AD9223 suffix solely because the drawing appears identical. Confirm resolution, sample rate, supply limits, temperature range, timing, pin descriptions, and ordering requirements for the exact suffix. The AD9221, AD9223, and AD9220 family members share package and pinout characteristics, but their performance targets differ. Also avoid treating a distributor synopsis as a substitute for the manufacturer's pin table, recommended circuit, and absolute-maximum-rating section.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No definitive compliance statement for the exact AD9223ARS ordering code was identified. Use the manufacturer product documentation and the relevant suffix-specific material declarations for production decisions.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD9223ARS datasheet AD9223ARS pinout AD9223ARS datasheet pdf AD9223ARS specifications AD9223ARS 28 pin SSOP AD9223ARS 12 bit ADC AD9223ARS 3 MSPS AD9223ARS replacement AD9223ARS equivalent AD9223ARS vs AD9223ARSZ AD9223ARS application circuit AD9223ARS price AD9223ARS stock Analog Devices AD9223ARS

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD9223ARS AD9223ARSZ AD9223ARZ AD9221ARSZ AD9220ARSZ analog-to-digital converter ADC 12-bit ADC pipelined ADC parallel output interface single-channel converter 3.0 MSPS 5 V power supply SSOP-28 package surface mount data acquisition industrial instrumentation communications receiver waveform capture digital oscilloscope signal integrity input settling clock jitter
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें