Analog Devices

ADM4857AR - 5V RS-485/RS-422 Transceiver | Analog Devices

MPN: ADM4857AR ✗ जीवन की समाप्ति
5 V Vdss RS-485 and RS-422 Rds(on) 8-lead SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

ADM4857AR अवलोकन

The Analog Devices ADM4857AR is a 5 V slew-rate-limited differential line transceiver for half-duplex and full-duplex RS-485 and RS-422 data communications. It is offered in an 8-lead SOIC package and is intended for high-speed communication over multipoint bus transmission lines. The device combines a differential driver, differential receiver, and bus-direction control in a surface-mount package.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable communication over noisy or long cables. The differential signal helps reject common-mode noise and supports communication between equipment located at different ground potentials. Within the interface hierarchy, the ADM4857AR belongs to the RS-485/RS-422 transceiver family, differential line-driver and receiver category, and broader multi-protocol serial-interface IC market.

Key features include operation from a 5 V supply, compatibility with both RS-485 and RS-422 networks, and slew-rate-limited signaling for reduced transmission-line ringing and electromagnetic interference. The device supports multipoint bus architectures and is designed for industrial and instrumentation environments where balanced differential signaling improves communication reliability. Its SOIC-8 package supports conventional surface-mount assembly and compact board layouts.

The slew-rate-limited architecture limits the transition rate of transmitted edges, reducing high-frequency harmonics that can cause reflections or interfere with nearby circuitry. The differential receiver detects the voltage difference between the bus pair rather than relying on a single-ended signal referenced to local ground. These characteristics make the interface well suited to factory automation, industrial control, building controls, instrumentation, and embedded communications systems.

Typical applications include industrial sensor networks, programmable logic controller communication, data acquisition equipment, motor-control systems, and long-cable industrial links. In these systems, the transceiver connects a UART or other serial controller to a balanced bus while the differential topology improves noise immunity. Board designers should account for termination, biasing, protection, grounding, and cable-length requirements when establishing the network.

When laying out a design, place the transceiver close to the connector and route the differential pair as a tightly coupled pair on a continuous ground plane. Configure termination only where required by the bus topology, and use suitable surge protection when exposed to industrial transients. Confirm the enable and receiver-output timing in the manufacturer datasheet before using the device in a mixed-direction bus.

This page organizes the ADM4857AR identity, electrical requirements, package information, comparison points, and application guidance into an engineering-focused reference. It also identifies verified same-brand transceiver options and highlights where a new circuit design must confirm protocol, speed, temperature, and pin-level compatibility before substitution.

के लिए ड्रॉप-इन विकल्प ADM4857AR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADM4857AR (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Supported Standards.

Analog Devices
Package: 8-pin SOIC
Supported Standards: EIA RS-485 and EIA RS-422
इसके साथ तुलना करें ADM4857AR →

ADM4852ARZ

✅ ड्रॉप-इन
📦 8-lead SOIC
Lower maximum data rate and narrower operating-temperature range; overall parametric match is 80%

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADM4851ARZ

✅ ड्रॉप-इन
Analog Devices
📦 8-lead SOIC
RS-485/RS-422 differential line transceiver · 5 V · 500 kbps · Half-duplex · EIA RS-485 and EIA RS-422 · 1/1 transceiver · Limited · Balanced differential

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADM4857AR विशेषताएं

Product Type RS-485/RS-422 differential line transceiver
सप्लाई वोल्टेज 5 V
Communication Mode Half-duplex and full-duplex
Supported Standards RS-485 and RS-422
Network Topology Multipoint bus
पैकेज 8-lead SOIC
माउंटिंग प्रकार Surface mount
Terminal Configuration Differential bus input and output

ADM4857AR 8-lead soic पिन कॉन्फ़िगरेशन गाइड

ADM4857AR (8-lead soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ADM4857AR के लिए 8-lead soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADM4857AR.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADM4857AR के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Networking, PLC and Factory Automation, Building and HVAC Controls, Data Acquisition Equipment, Motor and Power-Control Systems, Instrumentation and Test Equipment.

🏭

Industrial Sensor Networking

The ADM4857AR fits industrial sensor networks that distribute measurements from remote transmitters over a wired RS-485 bus. Its 5 V supply operation aligns with many embedded sensor nodes, while the differential line interface improves rejection of common-mode noise encountered near motors and switching equipment. The slew-rate-limited transmitter reduces high-frequency ringing on long cables, helping preserve communication reliability without changing the UART-based measurement architecture.

🏭

PLC and Factory Automation

The ADM4857AR is appropriate for connecting a controller, operator panel, or industrial module to an RS-485 automation network. The multipoint-bus capability allows multiple field devices to share a balanced pair of conductors when the topology and addressing scheme are properly designed. Differential signaling improves noise immunity in factory environments, while controlled edge rates reduce ringing and electromagnetic interference near control equipment.

🧩

Building and HVAC Controls

The ADM4857AR can connect thermostats, ventilation controllers, access-control equipment, and supervisory controllers to an RS-485 building network. The 5 V interface operates from a conventional embedded supply, and the balanced differential connection supports reliable links between equipment rooms and occupied spaces. When the cable crosses between buildings or different grounding domains, the differential receiver helps reduce susceptibility to common-mode ground-offset noise.

📺

Data Acquisition Equipment

The ADM4857AR suits multichannel measurement systems that need to distribute commands and collect data over a wired bus. A single multipoint network can connect instruments that use compatible addressing and communication rates. The controlled slew rate is valuable when instruments are linked by imperfect cables, because it limits fast edge components that can excite reflections and interfere with nearby analog measurement circuitry.

⚡

Motor and Power-Control Systems

The ADM4857AR can provide the command and status interface between a motor controller and a supervisory processor, especially when the serial bus is routed near switching devices. Differential reception reduces the impact of common-mode electrical noise, and the limited output transition rate helps control high-frequency content. Designers should still isolate or filter supply paths where transients are large and place protection near the external connector.

🔧

Instrumentation and Test Equipment

The ADM4857AR is useful in laboratory and field-test instruments that need a robust communication port for remote controllers or companion instruments. The RS-485/RS-422 interface offers a straightforward way to extend control and monitoring beyond a short board-level UART connection. Slew-rate-limited signaling supports controlled cable behavior, while the SOIC-8 package allows the interface to be added without requiring a large through-hole footprint.

What is the ADM4857AR?
The ADM4857AR is a 5 V differential line transceiver from Analog Devices for RS-485 and RS-422 communication. According to the Analog Devices manufacturer datasheet, the ADM4857 belongs to a family of differential transceivers intended for high-speed half-duplex and full-duplex data transfer over multipoint bus transmission lines. The ADM4857AR is packaged in an 8-lead SOIC for surface-mount industrial and instrumentation equipment.
What key specifications of ADM4857AR should engineers know?
The ADM4857AR operates from a 5 V supply and supports RS-485 and RS-422 differential communication. Its 8-lead SOIC package uses surface-mount assembly. Analog Devices describes the device as a slew-rate-limited transceiver suitable for half-duplex and full-duplex data communication on multipoint buses. The controlled edge rate reduces ringing and radiated interference, while differential signaling improves common-mode noise rejection.
Where can I download the ADM4857AR datasheet PDF?
The official ADM4857AR datasheet and product information are available from the Analog Devices product page at analog.com/en/products/adm4857.html. The page provides the manufacturer documentation for the ADM4850 through ADM4857 differential transceiver family. Use the pin-description table, electrical-characteristics table, and typical application diagrams from that document when assigning pins, selecting termination, and confirming operating limits.
Where can I find the ADM4857AR pinout?
Use the pin-configuration and pin-description tables in the Analog Devices ADM4857 manufacturer datasheet for the ADM4857AR 8-lead SOIC connection. The eight pins divide the device among supply, ground, receiver input or output, driver input or output, and direction-control functions. Request the current datasheet through the Request a Quote form if you need an authenticated copy for your production documentation package.
Is ADM4857AR suitable for industrial multipoint buses?
The ADM4857AR is suitable for industrial multipoint communication because it is designed for RS-485 and RS-422 differential line transmission and uses a controlled slew rate. Differential signaling rejects common-mode noise, while the limited edge rate reduces ringing and high-frequency EMI on longer cables. The device should still be reviewed against the exact bus length, termination topology, grounding method, and transient environment.
What can replace the ADM4857AR?
The closest verified same-brand replacement candidates are the ADM4852ARZ and ADM4851ARZ, but neither should be treated as a drop-in choice without checking every pin and operating parameter. The ADM4852ARZ has a lower maximum data rate and a narrower operating-temperature range than the ADM4857AR, while the ADM4851ARZ is a slower half-duplex alternative. Confirm protocol, speed, temperature, enable logic, and package dimensions against the manufacturer datasheet.
Is ADM4857AR the same as ADM4852ARZ?
No. The ADM4852ARZ is not electrically identical to the ADM4857AR because it has a lower maximum data rate and a narrower operating-temperature range. Both devices belong to the Analog Devices ADM485 transceiver family and use an 8-lead SOIC format, but the differences can affect existing designs. Use the ADM4857AR when the original circuit depends on its higher data rate or wider temperature range.
When should I choose ADM4857AR over ADM4852ARZ?
Choose the ADM4857AR when the interface requires its higher maximum data rate or its wider operating-temperature range. The ADM4852ARZ is more appropriate when the bus operates below the ADM4857AR’s speed limit and does not need the extended temperature coverage. Both are RS-485/RS-422 transceivers, but protocol labels alone do not establish pin-level or timing equivalence, so compare the relevant electrical tables before sourcing.
When should I choose ADM4857AR over ADM4851ARZ?
Choose the ADM4857AR when the design requires a faster differential interface or broader temperature operation than the ADM4851ARZ. Select the ADM4851ARZ only when its lower-speed characteristics satisfy the UART data rate, cable length, and propagation-delay requirements. Verify half-duplex control behavior and the enable-input implementation because family-level RS-485 compatibility does not guarantee identical system timing.
What is the best cross-brand equivalent for ADM4857AR?
No cross-brand drop-in equivalent is established by the manufacturer page or the available cross-reference records. A valid replacement must match the 8-lead SOIC footprint, RS-485/RS-422 electrical limits, maximum data rate, temperature range, supply voltage, and driver/receiver enable functions. Use the Request a Quote form to request current sourcing assistance, and require the proposed manufacturer to confirm pin-to-pin compatibility in writing before redesigning around it.
Where can I buy ADM4857AR online?
Use the Request a Quote form on this page to request current availability and sourcing for the ADM4857AR. Because the device is listed as obsolete, availability may be limited and inventory can vary by lot and condition. The form is the appropriate route for obtaining a quotation, requested quantity, condition details, and the lead time needed for your production schedule.
What is the price of ADM4857AR?
The ADM4857AR quotation depends on quantity, device condition, lot availability, and sourcing status. Submit the requested quantity through the Request a Quote form on this page for a current commercial response. The part is listed as obsolete, so an inventory-based quote may include traceability or condition considerations that should be reviewed before the order is released.
What is the lead time for ADM4857AR?
The current lead time for ADM4857AR must be confirmed for the requested quantity through the Request a Quote form on this page. As an obsolete 5 V RS-485/RS-422 transceiver, the order horizon may depend on remaining factory inventory, authorized-channel availability, and traceability requirements. Include your production date and required package quantity with the request so the quotation can reflect the actual schedule.
Is ADM4857AR in stock?
Stock status should be requested through the Request a Quote form because the ADM4857AR is listed as obsolete and inventory is not represented as a standing stock commitment. Ask for the exact MPN, package suffix, requested quantity, date code, lot traceability, and acceptable storage duration. This avoids making a production plan depend on an unconfirmed stock position.
How should termination and protection be designed around ADM4857AR?
Apply RS-485 termination at the physical ends of the bus rather than at every node, and use biasing only where the specification of the network requires it. Place surge protection close to the connector so transient current is diverted before reaching the ADM4857AR. Keep the balanced pair routed together over a continuous ground plane and verify the protection-device capacitance against the required data rate.

के लिए इंजीनियरिंग संदर्भ डेटा ADM4857AR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ADM4857AR when an existing RS-485/RS-422 design requires its higher data rate, wider operating-temperature range, or full-duplex capability. The ADM4852ARZ is the closer substitute when a half-duplex interface is sufficient, the required data rate is lower, and the narrower temperature range does not affect the installation. The ADM4851ARZ is more restrictive because it is a slower half-duplex alternative with a 70% overall parameter match. Neither alternative should be approved solely from the shared 8-lead SOIC package: verify supply voltage, driver and receiver enable functions, maximum data rate, propagation delay, receiver thresholds, temperature limits, and bus timing against the manufacturer datasheet. For new designs, use the Request a Quote form to identify a currently supported transceiver rather than standardizing an obsolete part without a deliberate sourcing plan.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADM4852ARZ ADM4851ARZ
Package 8-lead SOIC 8-lead SOIC 8-lead SOIC
Brand Analog Devices Analog Devices Analog Devices
Supported Standards RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422
Communication Mode Half-duplex and full-duplex Half-duplex Half-duplex
Slew-Rate Limiting Yes Yes Yes
Bus Topology Multipoint bus Multipoint bus Multipoint bus

मुख्य विशेषताएँ

  • Higher data-rate capability than the ADM4852ARZ (बनामADM4852ARZ)
  • Wider operating-temperature coverage than the ADM4852ARZ (बनामADM4852ARZ)
  • Full-duplex capability in an 8-lead SOIC interface (बनामADM4851ARZ)

डिज़ाइन नोट्स

Place the ADM4857AR close to the external connector and route the differential pair as a tightly coupled impedance-controlled pair over a continuous ground plane. Keep the driver and receiver return-current path short and avoid routing the bus through noisy power-converter regions. Maintain symmetric spacing between the two conductors and minimize stubs from test points or unused transceiver branches.

Do not terminate every node in an RS-485 bus. Install termination at the two physical ends of the trunk, and install fail-safe bias only when it is required by the network’s idle-state design. Confirm termination resistance, power-loss behavior, and maximum node count in the system design because incorrect bias or excessive termination can prevent reliable communication.

Use controlled-rise-time signaling to reduce ringing and high-frequency harmonics on the cable. Keep external protection devices close to the connector and account for their capacitance when selecting them. Separate the differential route from clocks, switching-power nodes, and relay contacts; also provide a low-impedance chassis or surge-ground path so transient current does not flow through sensitive signal traces.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available manufacturer and distributor pages do not provide explicit environmental or automotive qualification values for the ADM4857AR.

डेटा सत्यापन तिथि: 2026-11-06 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADM4857AR datasheet ADM4857AR datasheet pdf ADM4857AR pinout ADM4857AR equivalent ADM4857AR replacement ADM4857AR cross reference ADM4857AR SOIC-8 footprint ADM4857AR application circuit ADM4857AR vs ADM4852ARZ Analog Devices ADM4857AR ADM4857AR price ADM4857AR stock

संबंधित कंपोनेंट्स और शब्द

Analog Devices ADM4857AR ADM4852ARZ ADM4851ARZ RS-485 RS-422 differential line transceiver differential driver differential receiver interface IC multipoint bus half-duplex full-duplex slew-rate-limited signaling common-mode noise rejection 5 V transceiver 8-lead SOIC SOIC-8 surface-mount package industrial automation building controls data acquisition motor control RS-485 termination surge protection
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें