Texas Instruments

ADS1286UK - 12-Bit 20kSPS Micropower ADC | Texas Instruments

MPN: ADS1286UK ✓ सक्रिय
250 µA Vdss 8-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

ADS1286UK अवलोकन

The Texas Instruments ADS1286UK is a 12-bit, 20 kSPS micropower sampling analog-to-digital converter with one differential input, a sample-and-hold amplifier, and a serial interface compatible with SPI and SSI. It is packaged in an 8-pin SOIC and consumes approximately 250 µA of supply current. The part is identified by the UK package suffix and is supplied in a tube according to its ordering information.

A sampling ADC is an analog-to-digital converter that uses an internal sample-and-hold circuit to acquire an input voltage before conversion. The ADS1286 belongs to the broader ADC, data-converter, and semiconductor hierarchy. Its differential input architecture supports measurement of the voltage difference between two analog nodes, while its low 250 µA supply current makes it useful in remote sensing and compact battery-powered instrumentation.

The principal specifications are 12-bit resolution, a 20 kSPS sampling rate, one differential analog input, and 250 µA typical supply current. The serial interface supports SPI-compatible or SSI-compatible communication over two-wire or three-wire configurations. The converter also provides guaranteed no missing codes and combines conversion electronics with a sample-and-hold amplifier in one compact package.

At the circuit level, the ADC converts a differential input into a 12-bit digital result and transfers that result through the serial interface. Two-wire operation can reduce the number of signal connections needed for remote measurements, while three-wire operation provides a conventional serial data, clock, and data-ready arrangement. The low-power architecture avoids the supply-current penalty associated with continuously operating higher-speed data converters.

Typical uses include battery-powered portable instruments, low-energy sensor nodes, industrial monitoring equipment, remote data acquisition, and compact process-control modules. It is especially appropriate when the signal bandwidth is modest, low supply current is important, and a wired serial connection is preferable to a high-speed parallel interface.

Design the analog front end around the differential input range and acquisition requirements of the target signal. Keep the serial clock and data routing short, provide the supply and reference bypassing recommended by the manufacturer, and confirm that the selected tube packaging matches the assembly process. Confirm the exact input limits, operating-temperature limits, and electrical characteristics in the manufacturer datasheet before releasing the design.

This page combines the manufacturer device description with practical guidance for signal acquisition, interface selection, low-power instrumentation, and footprint planning. It also identifies where the ADS1286UK differs from other ordering options, making it easier to select the correct device without confusing package, delivery, or performance requirements.

के लिए ड्रॉप-इन विकल्प ADS1286UK — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

ADS1286UK Maximum Ratings और Electrical Characteristics

ADC Resolution 12 bit
सैंपलिंग रेट 20 kSPS
Architecture Successive-approximation register (SAR)
Number of Inputs 1 differential input
सप्लाई करंट 250 µA
सप्लाई वोल्टेज 4.5 V
Input Architecture Differential analog input
Analog Front End Sample-and-hold amplifier
Serial Interface SPI-compatible or SSI-compatible
Interface Configuration 2-wire or 3-wire serial interface
Conversion Completeness Guaranteed no missing codes
पैकेज 8-pin SOIC
माउंटिंग प्रकार Surface mount
Delivery Packaging Tube

ADS1286UK 8-pin soic पिन कॉन्फ़िगरेशन गाइड

ADS1286UK (8-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

ADS1286UK के लिए 8-pin soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADS1286UK.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADS1286UK के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Portable Instruments, Remote Sensor Acquisition Nodes, Industrial Process Monitoring, Data Acquisition and Control Systems, Precision Environmental Monitoring, Low-Power Condition Monitoring.

📱

Battery-Powered Portable Instruments

The ADS1286UK fits portable measurement instruments where a 12-bit differential converter must operate from a 4.5 V supply while consuming approximately 250 µA. Its 20 kSPS SAR architecture is suitable for slowly changing or moderately band-limited sensor signals rather than wideband waveform capture. The sample-and-hold amplifier is integrated into the 8-pin SOIC, reducing analog-front-end complexity. A two-wire serial configuration can also minimize control wiring in a remote probe, while the three-wire option provides a conventional clock, data, and data-ready arrangement. The practical benefit is a compact acquisition path that supports precision-oriented readings without the supply-current burden of a higher-performance converter.

🧩

Remote Sensor Acquisition Nodes

The ADS1286UK is appropriate for remote sensor nodes that transmit a limited number of measurements over a wired serial link. Its differential input can measure the difference between two related sensor voltages, which is useful when sensor excitation and return signals require common-mode rejection. The 20 kSPS conversion rate provides more than enough throughput for temperature, pressure, level, and slow-motion position measurements. With approximately 250 µA supply current and a two-wire-compatible interface, the converter supports low-power enclosure designs. Designers should still budget for sensor excitation, signal conditioning, reference accuracy, and the controller because those external circuits ultimately determine end-to-end energy use and measurement quality.

🏭

Industrial Process Monitoring

The ADS1286UK can serve as the ADC in an industrial process-monitoring module that converts a low-frequency differential analog signal into serial digital data. A 12-bit resolution supports many process-control measurements when the input is properly scaled and conditioned, while the 20 kSPS SAR rate is well matched to pressure, flow, and level signals with limited bandwidth. Its 250 µA operating current is particularly helpful in distributed monitoring equipment where each node has a limited power budget. The 8-pin SOIC format also supports compact board layouts. For reliable industrial operation, use grounded analog routing, stable reference and supply bypassing, and suitable input protection, then validate the complete signal chain across temperature and supply ranges.

⚡

Data Acquisition and Control Systems

The ADS1286UK works well in compact data-acquisition and control systems that need a deterministic serial conversion path rather than a parallel ADC bus. Its SPI-compatible or SSI-compatible interface supports connection to microcontrollers, programmable controllers, and industrial controllers, and the choice between two-wire and three-wire wiring helps match the host protocol. The differential input permits direct acquisition of bridge-style or differentially biased sensors when the signal remains within the device's input limits. With 12-bit resolution and 20 kSPS throughput, the part is aimed at control and monitoring channels rather than oscilloscope-class acquisition. The most important design check is end-to-end error, including reference stability, analog filtering, and controller timing.

🌐

Precision Environmental Monitoring

The ADS1286UK is appropriate for environmental monitoring systems that repeatedly measure low-bandwidth differential sensor outputs and prioritize low energy use. Its 12-bit conversion resolution can represent roughly 4,096 code levels, while the 20 kSPS rate supports oversampling relative to very slow environmental variables. Approximately 250 µA supply current helps remote weather, soil, water-quality, or enclosure-monitoring modules operate longer between service intervals. The integrated sample-and-hold amplifier and differential input reduce the number of active analog components around the converter. Accurate results still depend on low-noise excitation, clean grounding, reference stability, and input filtering; a converter-only resolution figure does not establish the complete system measurement accuracy.

🔧

Low-Power Condition Monitoring

The ADS1286UK can be applied to compact condition-monitoring modules that sample vibration, displacement, or strain signals after those signals have been scaled into the converter's differential input range. A 20 kSPS sampling rate is suitable for many diagnostic bandwidths, and the 12-bit SAR result provides a compact digital representation for trend analysis. The converter's approximately 250 µA supply current allows more of the power budget to remain available for sensing and wireless activity. Because condition-monitoring accuracy is strongly affected by noise and aliasing, the input network should include appropriate filtering and the mechanical system should be assessed for out-of-band vibration. SPI or SSI operation then transfers each result to the local controller without a wide parallel bus.

What is the ADS1286UK?
The ADS1286UK is a 12-bit, 20 kSPS micropower sampling ADC from Texas Instruments with one differential input, a sample-and-hold amplifier, and a serial interface compatible with SPI and SSI. According to the Texas Instruments ADS1286 product description, it consumes approximately 250 µA of supply current and supports serial communication over two-wire or three-wire configurations. The UK suffix identifies the 8-pin SOIC ordering option supplied in a tube.
What is the sampling rate and resolution of ADS1286UK?
The ADS1286UK converts at 20 kSPS with 12-bit resolution. According to the Texas Instruments product page and manufacturer datasheet, the device is a successive-approximation sampling ADC with one differential input and an integrated sample-and-hold amplifier. These figures position it for low-bandwidth measurement systems that need compact conversion, modest resolution, and low power consumption rather than high-speed waveform acquisition.
How much supply current does ADS1286UK use?
The ADS1286UK uses approximately 250 µA of supply current. According to the Texas Instruments ADS1286 product description, this micropower operating current combines with a two-wire serial option to suit remote and battery-powered measurement systems. The figure describes the converter's low-power operating class; final system consumption also depends on supply voltage, clocking, interface activity, and external circuitry.
Does ADS1286UK support SPI and SSI serial interfaces?
Yes, the ADS1286UK supports SPI-compatible and SSI-compatible serial communication. According to the Texas Instruments product description, the interface can operate in two-wire or three-wire configurations. This flexibility lets the converter share a compact wired connection with embedded controllers, while the available interface modes support different data, clock, and data-ready arrangements in instrument designs.
Where can I download the ADS1286UK datasheet PDF?
The ADS1286UK datasheet PDF is available from Texas Instruments at the official ADS1286 documentation link on this page. According to the manufacturer literature, the document covers the 12-bit, 20 kSPS differential-input converter, its 250 µA supply current, sample-and-hold amplifier, and SPI-compatible or SSI-compatible serial interface. Use the manufacturer version for pin assignments, electrical limits, and application details.
Where can I find the ADS1286UK pinout?
The ADS1286UK pin assignments are shown in the pin-configuration section of the Texas Instruments ADS1286 manufacturer datasheet. The device uses an 8-pin SOIC package, and the UK ordering option is supplied in a tube. Before assigning PCB tracks, compare the datasheet pin table with the selected power, ground, analog-input, clock, data, and data-ready functions.
What can replace the ADS1286UK?
The closest direct replacement is an ordering option of the same Texas Instruments ADS1286 device that retains the 12-bit, 20 kSPS, differential-input, 8-pin SOIC configuration and only changes the permitted delivery or marking format. The search results identify ADS1286UG4 and ADS1286UC as related ordering options, but a procurement engineer should verify their package suffix, temperature marking, reel or tube format, and pin compatibility before substitution.
Is ADS1286UK suitable for battery-powered sensor nodes?
The ADS1286UK is suitable for battery-powered sensor nodes when the measured bandwidth is compatible with its 20 kSPS sampling rate. According to the Texas Instruments product description, the ADC operates from a 4.5 V supply, consumes approximately 250 µA, and supports a two-wire interface. Those characteristics reduce wiring and power overhead in remote acquisition modules.
ADS1286UK vs ADS1286P: which package should I choose?
Choose the ADS1286UK for an 8-pin SOIC footprint and the ADS1286P for an 8-pin DIP footprint. The comparison information identifies ADS1286P as an 8-pin DIP alternative with consistent functional characteristics, but it is not a drop-in PCB replacement because the physical package and footprint differ. Existing surface-mount boards should retain the SOIC-based ADS1286UK.
When should I choose ADS1286UK instead of another ADC?
Choose the ADS1286UK when the design needs a 12-bit differential converter, a 20 kSPS sampling rate, and approximately 250 µA supply current in an 8-pin SOIC. According to the Texas Instruments product page, its integrated sample-and-hold amplifier and flexible SPI/SSI-compatible serial interface are useful for compact remote instrumentation. It is less appropriate when the application requires higher resolution, substantially higher throughput, or a different analog input architecture.
Is ADS1286UK the same as ADS1286UC?
The ADS1286UK and ADS1286UC belong to the same 12-bit, 20 kSPS ADS1286 family, but their ordering suffixes identify different device variants. The ADS1286UK is associated with an 8-pin SOIC supplied in a tube, while comparison information lists ADS1286UC as a closely related option. Check the exact package, temperature grade, marking code, and delivery format in the ordering table before treating either MPN as interchangeable.
What are the key specifications of ADS1286UK that engineers should know?
The key ADS1286UK specifications are 12-bit resolution, 20 kSPS conversion speed, one differential input, approximately 250 µA supply current, a 4.5 V supply, and an 8-pin SOIC package. According to the Texas Instruments product description, the converter also includes a sample-and-hold amplifier, guaranteed no missing codes, and SPI-compatible or SSI-compatible two-wire or three-wire serial communication.
What is the best Texas Instruments equivalent for ADS1286UK?
The best Texas Instruments equivalent is another qualified ordering option of the ADS1286 that preserves the 8-pin SOIC footprint and the same 12-bit, 20 kSPS differential conversion function. The related ADS1286UG4 and ADS1286UC options appear in the cross-reference results, but suffix-specific package, marking, temperature, and delivery details must be checked in the manufacturer ordering table. No cross-brand pin-compatible substitute was established by the cross-reference results.
Where can I buy ADS1286UK and what is its lead time?
Use the Request a Quote form on this page to ask for ADS1286UK availability, current lead time, and order quantity. The manufacturer identifies the UK option as an 8-pin SOIC supplied in a tube, but current inventory and production scheduling can change. The form allows the request to be associated with the exact MPN without relying on a static stock or lead-time claim.
Is ADS1286UK in stock and what does it cost?
Current ADS1286UK stock and commercial terms should be obtained through the Request a Quote form on this page. The manufacturer ordering information identifies a tube-packaged 8-pin SOIC option, while pricing and availability can vary with quantity and market conditions. Submit the required quantity and target assembly format with the request so the exact ordering option can be confirmed.
How should ADS1286UK be used in a low-power acquisition circuit?
Use the ADS1286UK as the central differential-input converter in a low-power acquisition circuit, then connect its SPI-compatible or SSI-compatible serial interface to the system controller. According to the Texas Instruments product description, its approximately 250 µA supply current and two-wire interface option are suited to remote measurements. Follow the manufacturer application guidance for analog filtering, bypassing, grounding, and digital-interface implementation.

के लिए इंजीनियरिंग संदर्भ डेटा ADS1286UK — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ADS1286UK when the design requires a 12-bit differential sampling ADC, a 20 kSPS conversion rate, and approximately 250 µA operating current in an 8-pin SOIC package. Its integrated sample-and-hold amplifier, guaranteed no missing codes, and SPI-compatible or SSI-compatible interface make it suitable for compact remote sensing, portable instruments, and low-bandwidth industrial monitoring. The UK ordering option is supplied in a tube, so it is appropriate for assembly processes compatible with tube packaging. Do not select it for high-speed waveform acquisition, substantially higher resolution, or designs requiring a different input architecture. Before finalizing a replacement, verify the exact pinout, electrical limits, temperature grade, supply requirements, reference arrangement, and delivery suffix. No cross-brand drop-in equivalent was established, so the safest path is to qualify the original device or an exactly matched ordering option.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Package 8-pin SOIC
Brand Texas Instruments
ADC Resolution 12 bit
Sampling Rate 20 kSPS
Architecture Successive-approximation register (SAR)
Input Channels 1 differential input
Supply Current 250 µA
Supply Voltage 4.5 V
Serial Interface SPI-compatible or SSI-compatible
Interface Configuration 2-wire or 3-wire serial interface
Analog Front End Integrated sample-and-hold amplifier
Conversion Completeness Guaranteed no missing codes

डिज़ाइन नोट्स

Place the analog input, supply, and reference components close to the ADS1286UK and keep the differential input traces symmetrical and short. Route the serial clock and data away from sensitive analog nodes, and use a continuous ground reference beneath the analog section. The 8-pin SOIC footprint leaves little routing room, so the pin-assignment table in the manufacturer datasheet should govern trace order, bypass placement, and test-point access.

Design the 4.5 V supply path for low noise because the ADS1286UK's approximately 250 µA operating current does not remove the need for careful bypassing. Follow the manufacturer recommendations for supply and reference decoupling, and place the capacitors close to their associated pins. If the converter shares a rail with switching circuitry, use appropriate filtering and return-current planning to prevent supply ripple from appearing directly at the analog input or reference.

Do not treat the 20 kSPS conversion rate as permission to sample arbitrary wideband signals without an anti-aliasing filter. The input is differential, so both signal leads must satisfy the common-mode and absolute voltage limits in the manufacturer datasheet. Also verify that the host controller's SPI or SSI timing, data-ready behavior, and two-wire or three-wire interpretation match the converter configuration used by the firmware.

For remote or noisy environments, use a shielded differential connection and terminate it according to the physical signal path rather than adding capacitance blindly at the converter pin. Use a common-mode or differential input filter with a corner frequency selected from the intended measurement bandwidth. This prevents out-of-band energy from folding into the 20 kSPS conversion result and helps preserve the practical accuracy expected from the 12-bit conversion word.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance declarations are not stated in the available manufacturer and distributor summaries. Confirm the current declarations in the Texas Instruments product documentation for the exact ordering option and destination market.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADS1286UK datasheet ADS1286UK datasheet pdf ADS1286UK pinout ADS1286UK specifications ADS1286UK equivalent ADS1286UK replacement ADS1286UK cross reference ADS1286UK vs ADS1286P Texas Instruments ADS1286UK ADS1286UK price ADS1286UK stock ADS1286UK application circuit

संबंधित कंपोनेंट्स और शब्द

Texas Instruments ADS1286UK ADS1286 ADS1286P ADS1286UG4 ADS1286UC analog-to-digital converter ADC successive-approximation register SAR ADC sampling ADC differential input sample-and-hold amplifier 12-bit resolution 20 kSPS sampling rate 250 µA supply current SPI SSI two-wire serial interface three-wire serial interface 8-pin SOIC SOIC package family surface-mount package remote sensor acquisition battery-powered instrumentation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें