Analog Devices

ADSP-2183BST-160 - 52 MIPS 16-Bit DSP | Analog Devices

MPN: ADSP-2183BST-160 ✓ सक्रिय
3.3 V Vdss 128-pin TQFP, 14 x 20 mm Package 40 MHz Speed External Memory
न्यूनतम ऑर्डर मात्रा: 1 |

ADSP-2183BST-160 अवलोकन

Analog Devices ADSP-2183BST-160 is a fixed-point, 16-bit digital signal processor delivering 52 MIPS sustained performance at a 40 MHz clock in a 128-pin TQFP package. The processor combines three computational units, an 80 KB on-chip RAM, two serial ports, a host port, and a three-bus architecture that supports dual-operand fetches during every instruction cycle.

A digital signal processor is a specialized microprocessor architecture optimized for filtering, Fourier analysis, signal conditioning, and other high-speed numeric operations. The ADSP-2183 belongs to the ADSP-2100 family and combines an arithmetic logic unit, multiplier, and barrel shifter within its three-unit computational core. Its 16-bit fixed-point architecture and 19 ns instruction cycle make it suitable for deterministic control and signal-processing systems.

Principal features include 52 MIPS sustained execution, single-cycle instruction execution, single-cycle context switching, 80 KB of on-chip RAM, two serial ports, and a host port. The three-bus architecture permits two operands to be fetched during an instruction cycle, while the single-cycle context switch reduces the overhead associated with real-time multitasking. The device supports applications requiring high-speed numeric processing rather than general-purpose host computing.

The ADSP-2100 base architecture is designed around modular computational units and deterministic instruction execution. Its fixed-point format is particularly useful for control loops, audio and communications filtering, modulation, instrumentation, and embedded signal analysis. The manufacturer describes the ADSP-2183 as a single-chip microcomputer optimized for digital signal processing and other high-speed numeric-processing applications.

Typical uses include industrial motor-control and feedback systems, communications filtering, audio signal processing, instrumentation, and embedded control platforms with a dedicated DSP stage. Designers can use the host port for host-processor coordination and the serial interfaces for external converters, codecs, transceivers, or peripheral data transfer. The processor's deterministic cycle behavior is especially useful when fixed computational latency matters.

When laying out a design, preserve the required clock, reset, and power-supply connections defined by the manufacturer datasheet and place decoupling capacitors close to the supply pins. Confirm the external memory interface requirements before PCB routing because the ADSP-2183's on-chip RAM does not imply that all program and data storage is internal. Validate timing at the intended clock and temperature before finalizing the surrounding circuitry.

This product overview combines the processor's architecture, packaging, application guidance, qualification considerations, and verified drop-in comparison points. It also distinguishes same-footprint alternatives from parts that differ in speed, memory, pin count, or package and therefore require a PCB redesign rather than a simple component substitution.

के लिए ड्रॉप-इन विकल्प ADSP-2183BST-160 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

ADSP-2183BSTZ-160

✅ ड्रॉप-इन
📦 128-pin TQFP (14 x 20 mm)
Same ADSP-2183 processor and 40 MHz clock rating; exact ordering-code attributes differ by 0 MHz and 0 KB on the stated core parameters, subject to suffix qualification review.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADSP-2183KST-133

✅ ड्रॉप-इन
📦 128-pin TQFP (14 x 20 mm)
Same ADSP-2183 family, while the -133 suffix denotes a lower performance class than the -160 device; the principal difference is approximately 27 MIPS of rated throughput.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADSP-2184BSTZ-160

✅ ड्रॉप-इन
📦 128-pin TQFP (14 x 20 mm)
Functionally compatible candidate with the same reported core architecture, 3.3 V supply, 40 MHz clock speed, and package type; peripheral and software behavior require verification.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADSP-2183BST-160 विशेषताएं

Processor Type Fixed-point digital signal processor
Data Width 16 bit
अधिकतम क्लॉक फ़्रीक्वेंसी 40 MHz
Sustained Performance 52 MIPS
Instruction Cycle Time 19 ns
सप्लाई वोल्टेज 3.3 V
On-Chip RAM 80 KB
Non-Volatile Memory External
Serial Port Count 2
इंटरफ़ेस प्रकार Synchronous Serial Port (SSP)
Host Port 1
Computational Unit Count 3
Internal Architecture Three-bus architecture
Execution Feature Single-cycle instruction execution
Context Switching Single-cycle context switch
पैकेज 128-pin TQFP, 14 x 20 mm
माउंटिंग प्रकार Surface mount
ऑपरेटिंग तापमान रेंज -40°C to +85°C

ADSP-2183BST-160 128-pin tqfp, 14 x 20 mm पिन कॉन्फ़िगरेशन गाइड

ADSP-2183BST-160 (128-pin tqfp, 14 x 20 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ADSP-2183BST-160 के लिए 128-pin tqfp, 14 x 20 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADSP-2183BST-160.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADSP-2183BST-160 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Motor Control, Digital Communications Filtering, Audio Signal Processing, Precision Instrumentation, Embedded Control Platform, Sensor Signal Conditioning.

🏭

Industrial Motor Control

The ADSP-2183BST-160 is well suited to digital motor-control loops because its three computational units and 52 MIPS sustained throughput can execute filtering, control-law, and signal-conditioning operations within a predictable instruction cycle. The 80 KB of on-chip RAM allows working data and time-sensitive code to remain close to the processor, while the host port supports supervisory commands and status reporting. Use the processor as the real-time computational element alongside external power semiconductors, position sensing, and communication hardware. The principal design consideration is balancing the -40°C to +85°C operating range against enclosure temperature, converter dynamics, and sampling latency.

🌐

Digital Communications Filtering

The ADSP-2183BST-160 can serve as a dedicated fixed-point processor for communications filtering, modulation, and demodulation stages. Its 16-bit arithmetic, three-bus architecture, and dual-operand fetching support high-throughput multiply-accumulate operations, while 80 KB of on-chip RAM reduces pressure on external memory during routine signal processing. Two serial ports allow data to move between converters, codecs, or network-facing interfaces, and the host port can coordinate protocol handling. Designers should select serial-port rates and buffering that satisfy the required sample cadence, then verify timing margins with the external interface devices.

🎧

Audio Signal Processing

The ADSP-2183BST-160 is appropriate for audio filtering, mixing, equalization, and other fixed-point operations that benefit from deterministic instruction execution. Its 52 MIPS throughput provides substantial capacity for block transforms and real-time sample processing, while the 80 KB RAM can accommodate short working buffers. A practical implementation can use one serial port for an audio codec and the other for control or auxiliary digital audio data, with the host port handling configuration. Signal integrity and clocking require attention: place support components according to the manufacturer layout guidance and avoid introducing long or noisy routes near high-speed clock and serial signals.

🖥️

Precision Instrumentation

The ADSP-2183BST-160 can implement signal conditioning, calibration, filtering, and numeric analysis in compact measurement equipment. The processor's single-cycle instruction execution and single-cycle context switching provide deterministic service for time-critical acquisition loops, while 80 KB of on-chip RAM supports local buffers and coefficients. Its two serial ports can connect to converters or other measurement peripherals, and the host port supports configuration and result transfer to a supervisory controller. For laboratory or field instrumentation, validate clock accuracy, analog-to-digital timing, input scaling, and thermal behavior across the intended environmental range before calibration.

🧩

Embedded Control Platform

The ADSP-2183BST-160 can act as a real-time signal-processing subsystem within a larger embedded control platform. Its host port provides a practical separation between high-rate numeric work and lower-rate supervisory tasks, allowing a host processor to configure operating modes and receive results without moving every control operation into the DSP. The 80 KB on-chip RAM is useful for time-critical data, and the 3.3 V supply simplifies integration with contemporary embedded logic. Developers should plan external program storage, boot behavior, reset sequencing, and interrupt ownership carefully because non-volatile memory is external and the host/DSP boundary must be defined before software partitioning.

⚡

Sensor Signal Conditioning

The ADSP-2183BST-160 is useful for conditioning and extracting information from sampled sensor data because it combines 52 MIPS throughput with 80 KB of on-chip RAM and flexible serial connectivity. Filtering, compensation, calibration, and feature extraction can execute locally without imposing continuous processing demand on a general-purpose host. One or both serial ports can connect to sensor front ends, while the host port transfers processed observations to the system controller. The implementation must account for sensor bandwidth, anti-alias filtering, conversion latency, and clock accuracy. Keeping these timing requirements inside the processor's deterministic execution model is essential for repeatable measurements.

अनुशंसित उत्पादों का सारांश

ADSP-2183BST-160 Analog Devices उपयोग में: Industrial Motor Control, Digital Communications Filtering, Audio Signal Processing, Precision Instrumentation, Embedded Control Platform, Sensor Signal Conditioning ADSP-2183 Base processor family used for DSP applications उपयोग में: Industrial Motor Control, Audio Signal Processing, Sensor Signal Conditioning ADSP-2183BSTZ-160 Same-family processor for dual-source design planning उपयोग में: Digital Communications Filtering, Embedded Control Platform ADSP-2184BSTZ-160 Functionally compatible processor for design comparison उपयोग में: Precision Instrumentation
What are the key specifications of ADSP-2183BST-160 that engineers should know?
The ADSP-2183BST-160 is a 16-bit fixed-point DSP that executes 52 MIPS at a 40 MHz clock with a 19 ns instruction cycle. It includes 80 KB of on-chip RAM, three computational units, two serial ports, a host port, and a three-bus architecture supporting dual-operand fetches. The device is packaged in a 128-pin TQFP measuring 14 x 20 mm. Analog Devices identifies these capabilities in the ADSP-2183 manufacturer datasheet.
Where can I download the ADSP-2183BST-160 datasheet PDF?
The official ADSP-2183BST-160 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADSP-2183.pdf. The document contains the processor description, architecture, electrical characteristics, package information, and pin definitions. Use the manufacturer PDF for PCB layout and design decisions rather than a distributor-generated summary, and confirm the ordering information against the exact BST-160 suffix.
What is the operating voltage and clock speed of ADSP-2183BST-160?
The ADSP-2183BST-160 operates from a 3.3 V supply and is rated for a 40 MHz clock, producing 52 MIPS of sustained fixed-point performance. The 19 ns instruction-cycle figure quoted for the device is consistent with its 40 MHz operating rate. Analog Devices states the 3.3 V operating condition and clock capability in the ADSP-2183 manufacturer datasheet.
How much memory and how many serial ports does ADSP-2183BST-160 have?
The ADSP-2183BST-160 provides 80 KB of on-chip RAM and two serial ports, together with a host port for communication with a host processor. Non-volatile storage is external rather than integrated on the chip. The ADSP-2183 manufacturer datasheet identifies the processor as a single-chip microcomputer optimized for digital signal processing and high-speed numeric processing.
Is ADSP-2183BST-160 suitable for industrial control applications?
The ADSP-2183BST-160 is suitable for industrial signal-processing and embedded-control designs that require deterministic execution within its stated -40°C to +85°C operating range. Its three computational units, single-cycle context switching, and 52 MIPS throughput are useful in filtering, feedback loops, and communications-related numeric processing. Final suitability depends on the complete control loop, external memory arrangement, and system-level thermal validation.
What is the difference between ADSP-2183BST-160 and ADSP-2183BSTZ-160?
ADSP-2183BST-160 and ADSP-2183BSTZ-160 identify closely related ADSP-2183 configurations, and the cross-reference information identifies the BSTZ-160 as a 40 MHz, 128-pin TQFP DSP. The exact purchasing-code meaning should be checked against the manufacturer ordering table before substituting one for the other. Both appear within the same ADSP-2183 family, but engineers should confirm temperature grade, lead finish, and qualification details for the intended assembly.
ADSP-2183BST-160 vs ADSP-2184BSTZ-160: which one is better for a drop-in design?
ADSP-2183BST-160 is the safer choice when software is already written for the ADSP-2183 because that processor retains the defined ADSP-2100-family architecture. The cross-reference information identifies ADSP-2184BSTZ-160 as functionally compatible and reports the same core architecture, supply voltage, clock speed, and package type. Before substitution, verify the complete pin list and peripheral assignments in the manufacturer documentation because functional compatibility alone does not establish software-binary equivalence.
When should I choose ADSP-2183BST-160 over ADSP-2183BSTZ-160?
Choose ADSP-2183BST-160 when the released BOM explicitly specifies that ordering code and its temperature, termination, or qualification attributes match the product requirements. Choose ADSP-2183BSTZ-160 only after comparing the manufacturer ordering information and confirming that every required parameter matches. Both belong to the ADSP-2183 family, so the decision should be based on the exact suffix, operating grade, and assembly requirements rather than processor performance alone.
What can replace ADSP-2183BST-160 without changing the PCB?
ADSP-2183BSTZ-160 is the closest identified same-family replacement because it uses the ADSP-2183 processor and a 128-pin TQFP package. ADSP-2184BSTZ-160 is another same-package candidate, but its functional compatibility does not guarantee identical software behavior. Use the manufacturer pin descriptions, clock requirements, and peripheral assignments to confirm any substitution before production. No cross-brand drop-in replacement is established by the available cross-reference information.
Is there a non-ADI drop-in equivalent for ADSP-2183BST-160?
No verified non-ADI drop-in equivalent is established for the ADSP-2183BST-160. The identified candidates are ADSP-2183BSTZ-160, ADSP-2183KST-133, and ADSP-2184BSTZ-160 from Analog Devices, all requiring package and pin-assignment review. A processor replacement must match not only the footprint but also clocking, memory interfaces, peripherals, voltage levels, and software assumptions. Use the Request a Quote form on this page if you need assistance identifying an approved sourcing path.
Where can I buy ADSP-2183BST-160 and check its availability?
Use the Request a Quote form on this page to request current ADSP-2183BST-160 availability, unit pricing, and lead time. The form is the appropriate commercial channel for this product page and avoids presenting stale or unqualified pricing. For technical qualification, provide the required quantity, temperature grade, packaging format, and target assembly location when submitting the request.
What is the price of ADSP-2183BST-160?
The current unit price for ADSP-2183BST-160 is obtained through the Request a Quote form on this page. Pricing can vary with quantity, procurement schedule, packaging, and component availability, so a static figure may not reflect a valid order. Include the required order quantity, target date, and permitted alternate suffix in the request to receive an actionable commercial response.
What is the lead time for ADSP-2183BST-160?
Request the current ADSP-2183BST-160 lead time through the Request a Quote form on this page. Lead time depends on order quantity, scheduled demand, package configuration, and current component availability. For production planning, provide the required delivery date and annual usage rather than relying on a generic stock estimate. An authorized sourcing response should confirm whether any approved suffix changes are involved.
Is ADSP-2183BST-160 in stock?
Stock status should be confirmed through the Request a Quote form on this page because availability can change by quantity and procurement date. Include the required quantity and target delivery date in the request. If your design permits an approved change, state whether ADSP-2183BSTZ-160 or another technically qualified suffix may be considered.
Where can I find the ADSP-2183BST-160 pinout and package information?
The ADSP-2183BST-160 pin descriptions and package drawing are located in the official Analog Devices ADSP-2183 datasheet at https://www.analog.com/media/en/technical-documentation/data-sheets/ADSP-2183.pdf. Use the pin-description table and package outline when assigning PCB nets. Do not infer an unused pin from a simplified distributor diagram, and verify the exact suffix against the manufacturer ordering information before releasing layout files.

के लिए इंजीनियरिंग संदर्भ डेटा ADSP-2183BST-160 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose ADSP-2183BST-160 when the design requires the defined ADSP-2183 architecture, 40 MHz clock, 52 MIPS throughput, 80 KB of on-chip RAM, and a 128-pin TQFP footprint. ADSP-2183BSTZ-160 is the closest same-family option when its ordering-code attributes satisfy the assembly and qualification requirements. ADSP-2183KST-133 may fit the same footprint but belongs to a lower throughput class, so use it only when 41.6 MIPS is sufficient and the exact timing requirements remain satisfied. ADSP-2184BSTZ-160 is appropriate for a functionally compatible redesign after verifying peripheral functions, interrupt behavior, memory requirements, and software changes. No cross-brand drop-in candidate has been established, so a processor migration from another manufacturer should not be treated as a footprint-only substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADSP-2183BSTZ-160 ADSP-2183KST-133 ADSP-2184BSTZ-160
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 128-pin TQFP (14 x 20 mm) 128-pin TQFP (14 x 20 mm) 128-pin TQFP (14 x 20 mm) 128-pin TQFP (14 x 20 mm)
Processor Type Fixed-point digital signal processor Fixed-point digital signal processor Fixed-point digital signal processor Fixed-point digital signal processor

मुख्य विशेषताएँ

  • Higher sustained-throughput class within the compared ADSP-2183 ordering options (बनामADSP-2183KST-133)
  • Closest same-family configuration with the same 40 MHz clock and 128-pin TQFP architecture (बनामADSP-2183BSTZ-160)
  • Direct retention of ADSP-2183 software targeting (बनामADSP-2184BSTZ-160)
  • Substantial local working memory for time-sensitive signal processing (बनामADSP-2183KST-133)

डिज़ाइन नोट्स

Use the manufacturer's recommended decoupling network and route each supply connection to its designated package pins with the shortest practical paths. The 3.3 V supply requirement is explicit, but allowable ripple, current limits, and sequencing conditions must be taken from the ADSP-2183 manufacturer datasheet. Keep switching-regulator loops and high-current return paths away from sensitive clock and serial routes, and include test points for verifying startup voltage and ripple.

Assign every ball or lead from the official pin-description table before routing the 128-pin TQFP footprint. Keep the DSP, external memory, and supporting logic placement consistent with the manufacturer's layout guidance, and maintain continuous return-plane references beneath high-speed traces. External memory is required for non-volatile storage, so account for its package, address mapping, and timing in the board floor plan rather than treating all storage as internal to the processor.

Route clock, serial-port, host-port, and external-memory signals with controlled impedance and avoid unnecessary stubs or test-point discontinuities. The three-bus architecture and single-cycle instruction execution support deterministic computation, but deterministic software timing does not compensate for a poorly implemented physical data path. Validate clock distribution and serial timing at the intended 40 MHz operating condition with the final board, connectors, memory, and external converters.

Do not substitute the processor solely because a distributor page shows a similar ADSP-2183 or ADSP-2184 designation. Verify package dimensions, pin assignments, clock rating, operating-temperature grade, non-volatile-memory requirements, peripheral functions, and software support. ADSP-2184BSTZ-160 is described as functionally compatible, but firmware and interrupt mappings must still be reviewed before it is accepted as a production replacement.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer datasheet and product page were available, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified in the retrieved text.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADSP-2183BST-160 datasheet ADSP-2183BST-160 datasheet pdf ADSP-2183BST-160 pinout ADSP-2183BST-160 specifications Analog Devices ADSP-2183BST-160 ADSP-2183BST-160 40 MHz DSP ADSP-2183BST-160 128 pin TQFP ADSP-2183BST-160 equivalent ADSP-2183BST-160 replacement ADSP-2183BST-160 cross reference ADSP-2183BST-160 vs ADSP-2184BSTZ-160 ADSP-2183BST-160 footprint ADSP-2183BST-160 application circuit ADSP-2183BST-160 price ADSP-2183BST-160 stock

संबंधित कंपोनेंट्स और शब्द

Analog Devices ADSP-2183BST-160 ADSP-2183BSTZ-160 ADSP-2183KST-133 ADSP-2184BSTZ-160 ADSP-2183 ADSP-2100 family digital signal processor DSP microcomputer fixed-point processor 16-bit data width 52 MIPS 40 MHz clock 19 ns instruction cycle 80 KB on-chip RAM three computational units three-bus architecture synchronous serial port host port 128-pin TQFP QFN family surface mount SMD industrial motor control digital communications filtering audio signal processing precision instrumentation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें