Analog Devices

ADSP-BF705BBCZ-3 - 300MHz Blackfin+ DSP | Analog Devices

MPN: ADSP-BF705BBCZ-3 ✓ सक्रिय
184-pin CSP-BGA, 12 x 12 mm Package 300 MHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

ADSP-BF705BBCZ-3 अवलोकन

The Analog Devices ADSP-BF705BBCZ-3 is a Blackfin+ digital signal processor with a 300 MHz core, dual-MAC 16-bit and 32-bit arithmetic capability, and 16-bit complex multiply-accumulate support. It is packaged in a 184-pin CSP-BGA measuring 12 x 12 mm. The processor is intended for embedded applications that require deterministic signal processing, high-throughput multiply-accumulate operations, and integrated digital control in a compact package.

A digital signal processor, or DSP, is a specialized microprocessor architecture optimized for filtering, transforms, modulation, demodulation, audio processing, and other mathematically intensive operations. The ADSP-BF705 belongs to the Blackfin+ processor family and combines a dual-MAC signal-processing engine with embedded control capabilities. Its architecture is suitable for systems in which predictable execution, parallel arithmetic, and efficient signal-chain handling are more important than general-purpose desktop computing.

The ADSP-BF705BBCZ-3 is identified as a 16-bit/32-bit processor operating at 300 MHz. The Blackfin+ core combines dual 16-bit and 32-bit MAC engines with a 16-bit complex MAC engine, supporting efficient execution of filtering, convolution, FFT-related, audio, communications, and control algorithms. The 184-CSP-BGA package provides a compact surface-mount solution for equipment where board area and component density are important.

The processor is used in embedded audio and communications systems, industrial signal-conditioning equipment, motor and motion-control platforms, network-connected measurement systems, and industrial control products. The BF705 family is particularly appropriate when a control loop must combine real-time signal analysis with supervisory logic. Its 300 MHz clock provides a useful balance between processing capacity and embedded power constraints.

The device is also available in closely related ADSP-BF705, ADSP-BF703, and ADSP-BF701 variants. The package and ordering-code suffix determine the exact temperature, speed, and commercial configuration, so designers should verify the complete ordering code before replacing a component. The ADSP-BF705BBCZ-3 is specifically listed for an industrial temperature range of -40°C to +85°C in distributor technical data.

For PCB design, the 184-pin CSP-BGA requires careful escape-routing, via-in-pad or via fanout strategy, and uninterrupted return-path planning. Power, ground, clock, and high-speed signal distribution should follow the Analog Devices ADSP-BF705 hardware design guidance. Because this BGA exposes fine-pitch balls, manufacturing capability and land-pattern validation should be completed before committing to a board layout.

This product page combines the confirmed processor identity, package information, operating-temperature data, and Blackfin+ architecture details with practical replacement guidance and application-oriented engineering notes. It is intended to help engineers identify the correct processor variant, assess board-level implications, and select a technically appropriate alternative rather than relying only on a generic DSP category description.

के लिए ड्रॉप-इन विकल्प ADSP-BF705BBCZ-3 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADSP-BF705BBCZ-3 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Product Family.

Analog Devices
Product Family: ADSP-BF70x Blackfin Digital Signal Processor family
इसके साथ तुलना करें ADSP-BF705BBCZ-3 →

ADSP-BF705KBCZ-3

✅ ड्रॉप-इन
📦 184-CSPBGA (12x12)
Same ADSP-BF705 family and 184-CSPBGA package, but the listed ambient-temperature range is 0°C to 70°C versus -40°C to 85°C for ADSP-BF705BBCZ-3.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADSP-BF705KBCZ-4

✅ ड्रॉप-इन
📦 184-CSPBGA (12x12)
Same ADSP-BF705 family and 184-CSPBGA package, but the -4 ordering suffix identifies a different configuration from the target MPN.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADSP-BF703BBCZ-4

✅ ड्रॉप-इन
Analog Devices
📦 184-CSPBGA (12x12)
Blackfin+ single-core digital signal processor · 400 MHz · 16-bit and 32-bit · Dual 16-bit MAC, 32-bit MAC, and 16-bit complex MAC · 256 KB · 1.8 V · -40°C to 85°C · 184-pin CSP-BGA

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADSP-BF701BBCZ-2

✅ ड्रॉप-इन
📦 184-CSPBGA (12x12)
Related ADSP-BF70x Blackfin+ processor in the same 184-CSPBGA package, but the lower-family device and -2 ordering suffix create functional configuration differences.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADSP-BF705BBCZ-4

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Analog Devices
📦 184-CSPBGA (12x12)
Blackfin+ digital signal processor · Single-core Blackfin+ · 400 MHz · Dual-MAC · Supported · Supported · ADSP-BF70x Blackfin Digital Signal Processor family · 16-bit/32-bit

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADSP-BF705BBCZ-3 विशेषताएं

Processor Type Blackfin+ digital signal processor
Core Clock Frequency 300 MHz
Architecture 16-bit/32-bit Blackfin+
Multiplier-Accumulator Dual-MAC 16-bit and 32-bit MAC plus 16-bit complex MAC
पैकेज 184-pin CSP-BGA, 12 x 12 mm
माउंटिंग प्रकार Surface mount
ऑपरेटिंग तापमान -40°C to +85°C TA
Product Family ADSP-BF70x Blackfin processor family
Instruction Set Instruction set compatible with previous Blackfin products
Signal Processing Engine Dual-MAC 16-bit, 32-bit MAC and 16-bit complex MAC engine
Core Type Single-core Blackfin+ processor

ADSP-BF705BBCZ-3 184-pin csp-bga, 12 x 12 mm पिन कॉन्फ़िगरेशन गाइड

ADSP-BF705BBCZ-3 (184-pin csp-bga, 12 x 12 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ADSP-BF705BBCZ-3 के लिए 184-pin csp-bga, 12 x 12 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADSP-BF705BBCZ-3.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADSP-BF705BBCZ-3 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Audio Processing, Communications Signal Processing, Industrial Control and Motion Systems, Test and Measurement Instruments, Network-Connected Embedded Equipment, Audio and Communications Product Platform.

🎧

Industrial Audio Processing

The ADSP-BF705BBCZ-3 fits industrial audio equipment that performs filtering, mixing, equalization, or noise reduction while retaining embedded control functions. Its 300 MHz Blackfin+ core and dual-MAC 16-bit and 32-bit arithmetic engine allow sample-oriented algorithms to execute with efficient multiply-accumulate throughput, while the 16-bit complex MAC supports complex signal operations. The 184-pin CSP-BGA package helps reduce board area in multi-channel audio appliances. The -40°C to +85°C TA specification supports equipment deployed across industrial temperature environments. Final selection still requires checking the ADSP-BF705 electrical limits, supported external-memory configuration, audio interface requirements, and the complete PCB land pattern.

🌐

Communications Signal Processing

The ADSP-BF705BBCZ-3 is appropriate for embedded communications systems that require deterministic filtering, modulation, demodulation, or spectrum-related calculations. Its Blackfin+ architecture combines dual 16-bit and 32-bit MAC operations with 16-bit complex MAC capability, supporting efficient implementation of communications kernels while the processor also handles control logic. Running at 300 MHz, the device provides substantial arithmetic capability for compact radio, modem, or network-edge equipment. The 184-CSP-BGA package reduces PCB footprint compared with larger leaded packages, although a fine-pitch assembly and careful power and signal-integrity layout are necessary.

🏭

Industrial Control and Motion Systems

The ADSP-BF705BBCZ-3 can serve as the real-time signal processor in industrial motor, motion, and condition-monitoring systems. The 300 MHz Blackfin+ core can execute control-loop math and signal analysis within one processor, while the dual-MAC engine improves throughput for filtering and coordinate transformations. Its documented -40°C to +85°C TA range is useful for factory equipment, machine controllers, and power-conversion platforms. The CSP-BGA package also allows dense placement beside memory and interface devices. Designers should confirm supply voltage, external-memory topology, peripheral assignments, watchdog behavior, and thermal performance under the intended switching and environmental conditions.

🖥️

Test and Measurement Instruments

The ADSP-BF705BBCZ-3 is well suited to embedded measurement instruments that perform real-time acquisition processing, calibration, filtering, or FFT-related work. Its 300 MHz Blackfin+ core and multiplier-accumulator architecture can accelerate repeated numerical operations while supporting the sequential control required by an instrument front end. The 16-bit and 32-bit instruction modes allow developers to balance data-path efficiency and general-purpose flexibility. In oscilloscope, signal-generator, or data-acquisition equipment, the processor may sit beside converters, memory, and communications interfaces. Thermal analysis and BGA assembly validation remain essential because processor performance and peripheral activity can create concentrated heat in the compact 12 x 12 mm package.

🧩

Network-Connected Embedded Equipment

The ADSP-BF705BBCZ-3 suits embedded equipment that performs local signal analysis and communicates results over an Ethernet or serial network. Its 300 MHz Blackfin+ core can process real-time data before forwarding selected results, reducing the burden on a host processor. The compact 184-CSP-BGA package is useful in gateways, condition-monitoring nodes, and industrial edge devices, while the broad -40°C to +85°C TA range supports operation in uncontrolled equipment environments. For a production design, interface assignment, buffering, Ethernet timing, bootloader support, and memory requirements must be reconciled with the processor configuration. The fine-pitch BGA also requires careful assembly planning and inspection coverage.

📱

Audio and Communications Product Platform

The ADSP-BF705BBCZ-3 provides a unified processing platform for audio and communications products that require deterministic multiply-accumulate performance. The Blackfin+ core supports 16-bit and 32-bit processing, dual MAC operation, and complex arithmetic, making it suitable for sampling pipelines, filters, channel processing, and protocol-related calculations. Its 300 MHz operating point offers substantial compute capacity without requiring a separate DSP for many embedded workloads. Designers can pair the processor with suitable converters and network interfaces while keeping the system compact through the 184-CSP-BGA package. Software partitioning, external-memory bandwidth, clocking, and thermal performance should be evaluated together to ensure predictable real-time behavior.

What is the ADSP-BF705BBCZ-3 processor used for?
The ADSP-BF705BBCZ-3 is a 300 MHz Blackfin+ digital signal processor for embedded signal-processing, communications, audio, industrial-control, and measurement applications. Its dual-MAC 16-bit and 32-bit arithmetic engine, 16-bit complex MAC capability, and 184-pin CSP-BGA package make it suitable for systems that combine real-time filtering or communications with embedded control logic. According to the Analog Devices ADSP-BF705 product page, the processor belongs to the ADSP-BF70x Blackfin family.
What are the key specifications of ADSP-BF705BBCZ-3?
The ADSP-BF705BBCZ-3 is a 16-bit/32-bit Blackfin+ DSP with a 300 MHz core frequency, dual-MAC 16-bit and 32-bit arithmetic, and 16-bit complex MAC capability. It is offered in a 184-pin CSP-BGA package measuring 12 x 12 mm and is specified for -40°C to +85°C ambient operation. These attributes are confirmed by the manufacturer product page and distributor product listings for the exact ordering code.
Where can I download the ADSP-BF705BBCZ-3 datasheet PDF?
The official ADSP-BF705 product page is the best starting point for the manufacturer datasheet and technical documentation. The exact ADSP-BF705BBCZ-3 ordering code is also identified on the Analog Devices product page and distributor listings. Use the package, pin, electrical, clock, and memory information in the manufacturer documentation when creating the PCB footprint or power-supply network.
Where can I find the ADSP-BF705BBCZ-3 pinout?
The ADSP-BF705BBCZ-3 pinout is defined by the Analog Devices ADSP-BF705 datasheet and associated hardware-design documentation. The device uses a 184-pin CSP-BGA package, so ball assignments and escaped power and ground connections must be transcribed from the package-specific documentation rather than inferred from a generic BGA footprint. The 184-ball package does not match one of the standardized package-diagram keys, so a generic diagram is used on this page.
What is the difference between ADSP-BF705BBCZ-3 and ADSP-BF705KBCZ-3?
ADSP-BF705BBCZ-3 and ADSP-BF705KBCZ-3 are both ADSP-BF705 Blackfin+ processors in the 184-pin CSP-BGA format, but their ordering-code suffixes identify different configurations. The available comparison identifies a temperature distinction: ADSP-BF705BBCZ-3 is specified at -40°C to +85°C TA, while ADSP-BF705KBCZ-3 is specified at 0°C to +70°C TA. Confirm all other ordering-code details before treating either part as a replacement.
Can ADSP-BF705KBCZ-3 replace ADSP-BF705BBCZ-3?
ADSP-BF705KBCZ-3 is a close same-package candidate for ADSP-BF705BBCZ-3, but replacement is conditional on the required ambient-temperature range and any other suffix-specific configuration. The two devices are both described as ADSP-BF705 Blackfin+ processors in 184-pin CSP-BGA packages. ADSP-BF705BBCZ-3 supports -40°C to +85°C TA, while ADSP-BF705KBCZ-3 is listed at 0°C to +70°C TA, making the latter unsuitable where the wider industrial temperature range is required.
When should I choose ADSP-BF705BBCZ-3 over ADSP-BF703BBCZ-4?
Choose ADSP-BF705BBCZ-3 when the design needs the documented 300 MHz Blackfin+ processing rate and the exact -40°C to +85°C industrial temperature range. ADSP-BF703BBCZ-4 is a related Blackfin+ option that appears in comparison catalogs, but its clock, temperature, and ordering-code characteristics must be checked against the ADSP-BF703 datasheet before substitution. For production designs, use only a candidate whose complete electrical, timing, package, and software requirements match.
Is ADSP-BF705BBCZ-3 suitable for industrial signal-processing equipment?
The ADSP-BF705BBCZ-3 is suitable for industrial signal-processing equipment because it combines a 300 MHz Blackfin+ core with an industrial ambient-temperature specification of -40°C to +85°C TA. Its dual-MAC and complex-MAC architecture is appropriate for filtering, communications, audio, and other deterministic algorithms. The board still requires industrial-level power regulation, thermal validation, EMC design, and BGA manufacturing controls.
What can replace the ADSP-BF705BBCZ-3?
The closest documented replacement candidates are same-package ADSP-BF705 and related Blackfin+ variants, including ADSP-BF705KBCZ-3, ADSP-BF705KBCZ-4, ADSP-BF703BBCZ-4, and ADSP-BF701BBCZ-2. None should be treated as an automatic substitute because suffix-specific clock, temperature, lifecycle, and configuration requirements can differ. Validate the exact ordering code against the manufacturer datasheet, software support, and the operating environment.
What is the best drop-in replacement for ADSP-BF705BBCZ-3?
ADSP-BF705KBCZ-3 is the closest drop-in candidate because it is an ADSP-BF705 Blackfin+ processor in the same 184-CSP-BGA package, but its listed operating range of 0°C to +70°C TA is narrower than the -40°C to +85°C TA range of ADSP-BF705BBCZ-3. It is therefore suitable only when the replacement application remains within that narrower temperature range and all other ordering-code features are equivalent.
ADSP-BF705BBCZ-3 vs ADSP-BF701BBCZ-2 — which processor should be selected?
ADSP-BF705BBCZ-3 is the stronger choice when a design requires the documented 300 MHz Blackfin+ core and the broader -40°C to +85°C TA range. ADSP-BF701BBCZ-2 is a lower-family Blackfin+ option whose exact clock, memory, peripheral, and lifecycle configuration must be checked before use. Neither should replace the other without confirming software support, pin-level functions, performance requirements, and operating-temperature limits.
Where to buy ADSP-BF705BBCZ-3 online?
Use the Request a Quote form on this page to request ADSP-BF705BBCZ-3 availability, current commercial terms, and a quotation. The form is the appropriate sourcing path for exact ordering-code verification, including package, speed grade, temperature range, and delivery quantity. Current stock status and lead time should be confirmed at the time of the request because embedded-processor inventory can vary by lot and packaging configuration.
What is the price of ADSP-BF705BBCZ-3?
The current commercial terms for ADSP-BF705BBCZ-3 should be obtained through the Request a Quote form on this page. The exact MPN includes a specific speed and temperature ordering code, so quotation and stock confirmation should use ADSP-BF705BBCZ-3 rather than a generic ADSP-BF705 designation. The request should state the required quantity, tray or other delivery format, target date, and destination.
What is the lead time for ADSP-BF705BBCZ-3?
The current lead time for ADSP-BF705BBCZ-3 should be requested through the Request a Quote form on this page. Lead time can depend on processor configuration, manufacturing lot, quantity, packaging format, and shipping destination. For production planning, include the required delivery date and approved alternative plan so the quotation can reflect realistic procurement rather than only nominal distributor inventory.
Is ADSP-BF705BBCZ-3 in stock?
Current ADSP-BF705BBCZ-3 stock status should be confirmed through the Request a Quote form on this page. Some distributor search listings indicate immediate shipment for the exact MPN, but inventory is time-sensitive and can change after the listing is captured. Include the required quantity and delivery date in the request, and specify whether a tray format is acceptable for the receiving operation.
How should the ADSP-BF705BBCZ-3 CSP-BGA footprint be designed?
The ADSP-BF705BBCZ-3 footprint should be based directly on the Analog Devices package drawing and land-pattern guidance for the 184-pin CSP-BGA, 12 x 12 mm package. Designers must plan ball escape routing, power and ground distribution, thermal-via placement, and manufacturing tolerances before layout release. A generic BGA footprint should not be substituted because ball arrays, ball pitches, and exposed thermal arrangements differ between packages.

के लिए इंजीनियरिंग संदर्भ डेटा ADSP-BF705BBCZ-3 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose ADSP-BF705BBCZ-3 for embedded industrial designs requiring the confirmed 300 MHz Blackfin+ configuration, dual-MAC arithmetic, and a -40°C to +85°C TA operating range. ADSP-BF705KBCZ-3 is the closest same-package option when the narrower 0°C to +70°C TA range is acceptable. ADSP-BF705KBCZ-4 may suit designs needing the listed 400 MHz configuration, but software timing and thermal requirements must be revalidated. ADSP-BF703BBCZ-4 and ADSP-BF701BBCZ-2 should be selected only when their respective processor performance and peripheral configurations are sufficient. Before replacing ADSP-BF705BBCZ-3, verify the complete ordering code, pin functions, electrical limits, clock tree, memory map, bootloader, software support, lifecycle status, and assembly footprint. The 184-CSPBGA package enables board reuse among these candidates, but package similarity alone does not guarantee functional equivalence.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADSP-BF705KBCZ-3 ADSP-BF705KBCZ-4 ADSP-BF703BBCZ-4 ADSP-BF701BBCZ-2
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 184-CSPBGA (12x12) 184-CSPBGA (12x12) 184-CSPBGA (12x12) 184-CSPBGA (12x12) 184-CSPBGA (12x12)
Processor Family ADSP-BF705 Blackfin+ ADSP-BF705 Blackfin+ ADSP-BF705 Blackfin+ ADSP-BF703 Blackfin+ ADSP-BF701 Blackfin+

मुख्य विशेषताएँ

  • Broader industrial ambient-temperature range than ADSP-BF705KBCZ-3 (बनामADSP-BF705KBCZ-3)
  • Exact 300 MHz ordering configuration (बनामADSP-BF705KBCZ-4)
  • Higher BF70x family positioning than ADSP-BF701BBCZ-2 (बनामADSP-BF701BBCZ-2)

डिज़ाइन नोट्स

Use the exact Analog Devices land pattern for the 184-pin CSP-BGA, 12 x 12 mm package rather than adapting a generic BGA footprint. Confirm ball-pitch data, package height, solder-mask and paste design, and the number and placement of thermal-via structures from the package drawing. Validate escape routing before placement of memory and communications devices so processor power, ground, and clock connections remain short and serviceable.

Separate the processor's core and I/O supply requirements according to the manufacturer power-supply design guidance. Place required bulk and high-frequency decoupling capacitors at the associated power balls, provide a low-impedance ground reference for every supply connection, and keep switching-regulator loops away from clock and high-speed signal paths. Validate the final rail tolerances, startup sequence, and power-consumption profile across voltage and temperature corners.

A 300 MHz Blackfin+ processor can generate concentrated heat inside a small 12 x 12 mm BGA package. Use the exposed thermal structure and thermal-via layout specified by Analog Devices, preserve uninterrupted copper on power and ground balls, and calculate junction temperature using the actual PCB copper area and enclosure conditions. Estimate the worst-case dissipation from the operating voltage, core current, I/O activity, and ambient temperature before defining fanless thermal limits.

Route clock and high-speed memory interfaces as controlled-impedance nets with continuous reference planes and short return paths. Avoid plane splits beneath the processor, provide clean decoupling at supply and ground balls, and apply the manufacturer’s guidance for memory topology, routing lengths, and interface timing. Run signal-integrity simulations or measurements with realistic stack-up, connector loading, and termination values rather than relying only on nominal schematic connectivity.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance details were not stated in the product and distributor listings, so each field remains unknown. The industrial ambient-temperature rating does not by itself establish AEC-Q100 qualification.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADSP-BF705BBCZ-3 datasheet ADSP-BF705BBCZ-3 pinout ADSP-BF705BBCZ-3 datasheet pdf ADSP-BF705BBCZ-3 equivalent ADSP-BF705BBCZ-3 replacement ADSP-BF705BBCZ-3 cross reference ADSP-BF705BBCZ-3 vs ADSP-BF705KBCZ-3 ADSP-BF705BBCZ-3 price ADSP-BF705BBCZ-3 stock Analog Devices ADSP-BF705BBCZ-3 ADSP-BF705 300MHz DSP ADSP-BF705 184 CSP-BGA ADSP-BF705 audio processing ADSP-BF705 industrial control

संबंधित कंपोनेंट्स और शब्द

Analog Devices ADSP-BF705BBCZ-3 ADSP-BF705KBCZ-3 ADSP-BF705KBCZ-4 ADSP-BF703BBCZ-4 ADSP-BF701BBCZ-2 Blackfin+ digital signal processor DSP microprocessor semiconductor dual-MAC multiply-accumulate complex MAC 16-bit/32-bit architecture 300 MHz 184-CSPBGA BGA surface mount embedded signal processing industrial control audio processing communications signal processing RoHS REACH AEC-Q100
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें