ADV7280BCPZ-M-RL - 8-Input SDTV Video Decoder | ADI
MPN: ADV7280BCPZ-M-RL ✓ सक्रियADV7280BCPZ-M-RL अवलोकन
An oversampled video decoder is an interface IC that converts multiple analog baseband video formats into digital component data for processing or display. The ADV7280 belongs to the video decoder hierarchy within interface ICs and semiconductor signal-processing devices. Its composite, S-Video, and component-video support consolidates several legacy analog sources into a digital pipeline while reducing the number of discrete signal-processing components required by an embedded system.
Key features include support for eight analog inputs, automatic detection of worldwide NTSC, PAL, and SECAM signals, 10-bit decoding, oversampling, deinterlacing, and I2P conversion. The decoder outputs an 8-bit YCrCb 4:2:2 stream through a MIPI CSI-2 serial interface. Configuration is handled through a two-wire, serial, bidirectional serial port compatible with I2C. Its monolithic 1.8 V CMOS construction supports lower power dissipation while integrating decoding and deinterlacing functions.
The ADV7280-M architecture is intended for space-constrained portable and embedded video equipment. Eight single-ended inputs allow the device to serve multiple camera, composite-video, S-Video, or component sources without duplicating the decoder function. MIPI CSI-2 output carries the decoded YCrCb data to a host processor, digital signal processor, display controller, or image-processing pipeline. The separate ADV7280 family member supports four inputs, making the ADV7280-M the higher-channel-count option.
Typical uses include automotive infotainment, vehicle camera systems, industrial inspection equipment, portable media devices, security cameras, video capture systems, and industrial control panels. The 32-LFCSP package is suitable for compact mixed-signal layouts, but exposed-pad thermal management and careful routing of analog inputs, digital supply rails, and the MIPI interface are essential. The manufacturer describes the package as an LFCSP option for space-constrained portable applications.
For implementation, follow the pin-description table and reference layout in the Analog Devices ADV7280 datasheet. Keep analog video traces short, controlled-impedance connections stable, and switching supplies away from sensitive video inputs. Use the exposed pad as a thermal and low-impedance ground connection according to the manufacturer's layout guidance. Verify the required I2C address, deinterlacing mode, output timing, and I2P configuration in firmware before production release.
This product page combines manufacturer-function details, interface-family distinctions, replacement guidance, and application-oriented engineering guidance. It also identifies where application-specific resources such as pin assignments, register behavior, timing limits, and package drawings should be confirmed in the official documentation.
के लिए ड्रॉप-इन विकल्प ADV7280BCPZ-M-RL — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADV7280BCPZ-M-RL (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Control Interface, Package, Digital Output Interface, Oversampling, Product Type.
ADV7280WBCPZ-M-RL
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →ADV7280AWBCPZ-M
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →ADV7280BCPZ-M
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →ADV7280BCPZ-RL
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADV7280BCPZ
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →ADV7280BCPZ-M-RL विशेषताएं
| Product Type | Oversampled SDTV video decoder with deinterlacer |
| Analog Input Count | 8 inputs |
| Analog Input Type | Single-ended |
| Supported Video Standards | NTSC, PAL, and SECAM |
| Supported Input Formats | Composite, S-Video, and component video |
| ADC Resolution | 10 bit |
| Output Resolution | 8-bit YCrCb 4:2:2 |
| Digital Output Interface | MIPI CSI-2 serial interface |
| Control Interface | 2-wire serial bidirectional I2C-compatible port |
| Process Technology | 1.8 V CMOS |
| I2P Conversion | Supported |
| Oversampling | Supported |
| Deinterlacer | Integrated |
| पैकेज | 32-LFCSP, 5 mm x 5 mm |
| माउंटिंग प्रकार | Surface mount |
| Shipping Package | Tape and reel |
ADV7280BCPZ-M-RL tape and reel पिन कॉन्फ़िगरेशन गाइड
ADV7280BCPZ-M-RL (tape and reel पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADV7280BCPZ-M-RL.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ADV7280BCPZ-M-RL के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Infotainment Video Interface, Industrial Machine Vision, Security Camera Video Capture, Portable Media Player, Video Test and Measurement, Broadcast and Legacy Video Conversion.
Automotive Infotainment Video Interface
ADV7280BCPZ-M-RL is suitable for automotive infotainment systems that must consolidate multiple analog baseband video sources before digital processing. Its eight single-ended analog inputs can handle compatible NTSC, PAL, or SECAM composite, S-Video, and component signals, while automatic format detection simplifies source handling. The 8-bit YCrCb 4:2:2 output is carried over MIPI CSI-2 to a host or display controller. Eight channels reduce the number of separate decoder ICs and associated routing compared with a four-input implementation. Before production use, verify the exact automotive temperature grade, qualification status, electrical limits, and exposed-pad layout against the Analog Devices ordering information.
अनुशंसित
Industrial Machine Vision
ADV7280BCPZ-M-RL fits industrial inspection systems that combine several standard-definition analog cameras with downstream image processing. The eight-input architecture permits multiple single-ended video sources to share one decoding stage, while 10-bit oversampling and the integrated deinterlacer produce a consistent digital stream for analysis. NTSC, PAL, and SECAM detection allows equipment deployed in different regions to identify incoming baseband formats automatically. The MIPI CSI-2 output connects the decoder to a processing pipeline without requiring parallel pixel data across the board. Keep the analog paths compact and isolate them from switching nodes, then use the manufacturer reference layout and pin table to preserve signal integrity around the 32-LFCSP device.
अनुशंसित
Security Camera Video Capture
ADV7280BCPZ-M-RL can serve as the analog-video front end in a security camera or multi-camera capture appliance. Its eight single-ended inputs support installations that combine composite or S-Video camera feeds, and automatic NTSC, PAL, and SECAM detection simplifies compatibility with mixed camera standards. The decoder converts each accepted signal into an 8-bit YCrCb 4:2:2 stream for transmission through MIPI CSI-2. This digital interface allows the decoded content to enter a host processor or storage pipeline with fewer board-level video signals than a parallel implementation. Because analog video can pick up noise, route inputs away from high-current switching paths, maintain controlled return paths, and follow the Analog Devices reference layout for the exposed pad.
अनुशंसित
Portable Media Player
ADV7280BCPZ-M-RL is appropriate for portable media equipment that accepts legacy analog video while producing a compact digital interface. Its 32-LFCSP package occupies 5 mm by 5 mm, and the integrated eight-input decoder consolidates several source-selection functions without the area required by discrete analog and digital conversion blocks. The monolithic 1.8 V CMOS construction supports power-conscious designs, while MIPI CSI-2 carries the 8-bit YCrCb 4:2:2 stream to a mobile-oriented host processor. I2C-compatible configuration allows firmware to select operating modes through a compact control path. Designers should follow the manufacturer decoupling, exposed-pad, and analog-routing guidance and confirm total power and thermal performance in the final enclosure.
अनुशंसित
Video Test and Measurement
ADV7280BCPZ-M-RL can be used in video test equipment that needs to decode several standard analog baseband sources before measurement or transformation. Eight single-ended inputs permit multiple NTSC, PAL, or SECAM sources to be selected for evaluation, while the integrated deinterlacer and I2P conversion expand the signal-processing capability beyond simple format recognition. The resulting 8-bit YCrCb 4:2:2 data is delivered over MIPI CSI-2, enabling connection to a host analyzer, processor, or display path. In instrumentation, keep analog input routing deterministic and use controlled grounding to reduce measurement uncertainty. Confirm I2C configuration, clocking, output timing, and the exact 32-LFCSP pin assignments from the official datasheet before instrument calibration.
अनुशंसित
Broadcast and Legacy Video Conversion
ADV7280BCPZ-M-RL is useful in broadcast and legacy-video conversion equipment that must accept multiple analog formats and present a digital output to modern processing hardware. Composite, S-Video, and component inputs support common professional and industrial sources, while automatic detection of NTSC, PAL, and SECAM allows the same platform to cover international standards. Eight inputs can reduce repeated decoder circuitry when several sources must be monitored or routed. The 10-bit oversampled decoder and integrated deinterlacer provide the digital foundation for subsequent processing, and MIPI CSI-2 transports the 8-bit YCrCb 4:2:2 result. Verify signal amplitude limits, timing, chroma format, and synchronization behavior against the manufacturer electrical tables for each source standard.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ADV7280BCPZ-M-RL — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ADV7280WBCPZ-M-RL | ADV7280AWBCPZ-M | ADV7280BCPZ-M | ADV7280BCPZ-RL | ADV7280BCPZ |
|---|---|---|---|---|---|---|
| Package | 32-LFCSP (5 mm x 5 mm) | 32-LFCSP (5 mm x 5 mm) | 32-LFCSP (5 mm x 5 mm) | 32-LFCSP (5 mm x 5 mm) | 32-LFCSP (5 mm x 5 mm) | 32-LFCSP (5 mm x 5 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Analog Input Count | 8 single-ended inputs | 8 single-ended inputs | 8 single-ended inputs | 8 single-ended inputs | 4 single-ended inputs | 4 single-ended inputs |
| ADC Resolution | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit | 10 bit |
| Digital Output | 8-bit YCrCb 4:2:2 | 8-bit YCrCb 4:2:2 | 8-bit YCrCb 4:2:2 | 8-bit YCrCb 4:2:2 | 8-bit YCrCb 4:2:2 | 8-bit YCrCb 4:2:2 |
| Output Interface | MIPI CSI-2 | MIPI CSI-2 | MIPI CSI-2 | MIPI CSI-2 | MIPI CSI-2 | MIPI CSI-2 |
| Supported Video Standards | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM | NTSC, PAL, and SECAM |
| Control Interface | 2-wire bidirectional I2C-compatible | 2-wire bidirectional I2C-compatible | 2-wire bidirectional I2C-compatible | 2-wire bidirectional I2C-compatible | 2-wire bidirectional I2C-compatible | 2-wire bidirectional I2C-compatible |
| Process Technology | 1.8 V CMOS | 1.8 V CMOS | 1.8 V CMOS | 1.8 V CMOS | 1.8 V CMOS | 1.8 V CMOS |
| I2P Conversion | Supported | Supported | Supported | Supported | Supported | Supported |
मुख्य विशेषताएँ
- Higher analog channel count than the non-M ADV7280 family (बनामADV7280BCPZ-RL)
- Eight-input operation is retained in the W ordering option (बनामADV7280WBCPZ-M-RL)
- Digital video output avoids a parallel pixel-data interface (बनामADV7280BCPZ-RL)
डिज़ाइन नोट्स
Route the eight single-ended analog video inputs as short, quiet traces and provide a continuous ground reference beneath the sensitive input paths. Keep switching-regulator components, inductors, and high-speed digital return currents away from these routes. Follow the Analog Devices ADV7280 reference layout for component placement, decoupling, trace geometry, and the exposed-pad connection rather than inferring placement from the 32-LFCSP dimensions alone.
Treat the exposed pad as both a thermal path and a carefully engineered electrical connection. Use the manufacturer's recommended pad geometry and thermal-via arrangement to distribute heat into the PCB copper planes. Estimate worst-case junction temperature from actual decoder power, ambient temperature, and the board-specific thermal resistance rather than relying only on a package-level value; the available product summary does not establish a complete thermal rating.
Do not treat a four-input ADV7280 ordering variant as an unconditional functional replacement for the eight-input ADV7280-M. Although the package family and decoder interface align, the analog input count changes from 8 to 4, which is a 50% reduction. Verify every package pin, input assignment, supply connection, exposed-pad connection, and software configuration in the official datasheet before approving a substitution.
Confirm source amplitude, impedance, sync behavior, chroma format, and clocking for each composite, S-Video, or component input before enabling every channel. The decoder automatically identifies NTSC, PAL, and SECAM, but automatic format detection does not replace correct source termination or signal conditioning. Use the manufacturer timing and application information to constrain cable length, grounding, and analog input bandwidth.
अनुपालन जानकारी
The available manufacturer and distributor summaries do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for the exact ordering code. The ADV7280AWBCPZ-M ordering variant is listed, but its qualification details must be confirmed in the official ordering information.