AK4115VQ - 24-Bit Digital Audio Interface | AKM
MPN: AK4115VQ ✗ जीवन की समाप्तिAK4115VQ अवलोकन
A digital audio interface transceiver is an interface IC that converts digital audio data into an analog audio output and can also pass digital audio through a secondary interface. In the product hierarchy, the AK4115VQ belongs to the digital audio interface transceiver class, within interface ICs and broader semiconductor signal-processing devices. This bidirectional-capable architecture helps consolidate digital-to-analog conversion, clock recovery, and digital audio routing into one dedicated component.
The AK4115VQ supports 24-bit audio processing and a maximum 192 kHz sampling rate according to the manufacturer datasheet listing. Analog and digital supply voltages both range from 2.7 V to 3.6 V. The low-jitter analog PLL supports clock recovery from biphase-coded data and dedicated word-clock signals, while two crystal-oscillator options allow implementation with different reference-clock arrangements. These features make the device suitable for systems where clock quality and interface flexibility affect conversion performance.
The transceiver architecture is intended to reduce the number of discrete digital-audio and decoding functions required in an audio subsystem. Low-jitter clock recovery is particularly important when the incoming data stream does not carry a clean external word clock. Dual oscillator support gives the circuit designer additional options for synchronizing internal and external timing domains. The 2.7 V to 3.6 V supply range also places the device in equipment using common low-voltage digital and analog rails.
Typical applications include Dolby Digital audio decoding in surround-sound receivers, digital mixing consoles, DVD and Blu-ray player audio paths, broadcast equipment, and multichannel recording systems. The device is also useful in digital audio interface cards and professional monitor controllers where 24-bit conversion fidelity, high sampling rates, and reliable clock recovery are required.
Designers should treat the analog and digital supplies as separate power domains and follow the manufacturer layout and decoupling guidance. The 10 mm by 10 mm LQFP package has 64 leads, so controlled differential clock routing, grounded analog sections, and careful assignment of noisy digital return currents are essential. Before layout release, verify all 64 pin assignments against the manufacturer pin-description table and confirm the selected oscillator and interface modes.
This product page combines exact ordering information, supply and package details, functional comparison, replacement guidance, and practical layout considerations. It also identifies which similarly named AKM devices are not pin-to-pin replacements, preventing a functionally similar but footprint-incompatible part from being treated as a drop-in substitution.
के लिए ड्रॉप-इन विकल्प AK4115VQ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंAK4115VQ विशेषताएं
| Device Type | Digital Audio Interface Transceiver (DIX) |
| Audio Processing Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Analog Supply Voltage | 2.7 V to 3.6 V |
| Digital Supply Voltage | 2.7 V to 3.6 V |
| Supported Audio Standard | Dolby Digital |
| Clock Recovery | Low-jitter analog PLL |
| Clock Recovery Input | Biphase-coded data or dedicated word clock |
| Crystal Oscillator Support | 2 crystal oscillators |
| पैकेज | 64-LQFP, 10 mm x 10 mm |
| माउंटिंग प्रकार | SMD surface mount |
| ऑपरेटिंग तापमान | -20 °C to +85 °C |
| RoHS स्थिति | ROHS3 compliant |
| Supply Configuration | Separate analog and digital supplies, both 2.7 V to 3.6 V |
| पिन काउंट | 64 pins |
| Package Body Dimensions | 10 mm x 10 mm |
| Interface Direction | Digital audio interface transceiver (DIX) |
AK4115VQ 10 mm x 10 mm पिन कॉन्फ़िगरेशन गाइड
AK4115VQ (10 mm x 10 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AK4115VQ.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
AK4115VQ के लिए उपयुक्त है 6 अनुप्रयोगs: Dolby Digital AV Receivers, Professional Digital Mixing Consoles, Multichannel Recording Systems, Broadcast Audio Monitoring, Digital Audio Interface Cards, DVD and Blu-Ray Player Audio Paths.
Dolby Digital AV Receivers
The AK4115VQ fits the Dolby Digital decoding section of an AV receiver because it combines a 24-bit digital audio interface transceiver with Dolby Digital support. Its documented operation up to 192 kHz accommodates high-resolution surround-sound formats, while the low-jitter analog PLL recovers timing from biphase-coded data or a dedicated word clock. Separate 2.7 V to 3.6 V analog and digital supplies allow the decoder to be isolated from noisy digital switching circuits. In the finished receiver, the device reduces the number of separate digital-audio routing and decoding functions, although correct analog grounding and low-jitter clock routing remain essential to preserve sound quality.
अनुशंसित
Professional Digital Mixing Consoles
The AK4115VQ is suitable for digital mixing consoles that process 24-bit audio and require stable clock recovery across multiple digital sources. Its low-jitter analog PLL supports biphase-coded streams and dedicated word-clock inputs, helping the console maintain predictable sampling alignment. The 192 kHz capability is useful for high-resolution monitoring and recording workflows. Place the transceiver near the relevant digital-audio interface circuitry and route clock and data traces away from motor-control and display power paths. Because analog and digital rails have separate 2.7 V to 3.6 V supply ranges, designers can control local grounding and filtering around the converter more effectively than with a shared, unpartitioned supply arrangement.
अनुशंसित
Multichannel Recording Systems
The AK4115VQ can serve as the digital-audio interface in a multichannel recording system requiring 24-bit data and high sampling rates. Clock recovery through the low-jitter analog PLL allows operation with biphase-coded data or a dedicated word clock, while dual crystal-oscillator options support several clocking architectures. The 192 kHz documented limit is appropriate for high-resolution studio paths. For best results, keep the analog output section away from high-current amplifier and converter return currents, provide local bypass capacitance at both supply domains, and maintain a continuous ground reference under the analog section. The 64-LQFP footprint requires careful fanout to preserve short digital routes and controlled analog traces.
अनुशंसित
Broadcast Audio Monitoring
The AK4115VQ fits broadcast monitoring equipment that receives decoded digital audio and requires a clean interface into conversion or monitoring circuitry. Its 24-bit processing, Dolby Digital capability, and clock recovery from biphase-coded data support professional digital-audio distribution formats. The low-jitter PLL is particularly useful when the input stream does not provide an ideal external word clock. Both analog and digital rails operate from 2.7 V to 3.6 V, supporting compact, low-voltage monitoring designs. Keep clock, data, and return-current paths tightly controlled, and use the manufacturer's grounding and decoupling layout as the starting point for a stable analog-noise floor in continuously operating broadcast equipment.
अनुशंसित
Digital Audio Interface Cards
The AK4115VQ is appropriate for plug-in or rack-mounted digital audio interface cards that need decoding and interface conversion in a single 64-LQFP device. Its 192 kHz maximum documented rate supports high-resolution sources, while the two crystal-oscillator options simplify adaptation to different host-clock arrangements. The independent 2.7 V to 3.6 V analog and digital supply domains are especially useful on cards with a noisy computer or control-system power environment. Designers should separate converter return currents from digital logic, keep bypass capacitors close to their supply pins, and avoid routing sensitive audio outputs beneath high-speed clock nets. Verify all 64 lead assignments against the manufacturer pin table before finalizing the footprint.
अनुशंसित
DVD and Blu-Ray Player Audio Paths
The AK4115VQ can be used in DVD and Blu-ray player audio paths where Dolby Digital streams must be decoded and converted for downstream amplifiers. Its 24-bit architecture supports high-quality digital audio processing, and its documented 192 kHz operation provides headroom for high-resolution media formats. The low-jitter analog PLL allows clock recovery from encoded digital-audio data or an external word clock, while dual oscillator options provide flexibility across source and output domains. Use separate filtering and grounding for the 2.7 V to 3.6 V analog and digital supplies, and position the device to minimize coupling from display, optical-drive, or switching-power circuitry. Stable clocking is central to avoiding channel skew and playback anomalies.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा AK4115VQ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | AK4118AEQ |
|---|---|---|
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Package | 64-LQFP, 10 mm x 10 mm | 48-LQFP; not the same footprint |
| Pin Compatibility | 64-LQFP AK4115VQ lead assignment | Not pin-to-pin compatible; PCB redesign required |
| Maximum Sampling Rate | 216 kHz | 192 kHz |
| Operating Temperature | -20 °C to +85 °C | -10 °C to +70 °C |
| Drop-In Status | Original 64-LQFP device | Not a drop-in replacement |
| Firmware Requirement | AK4115VQ firmware and board configuration | Firmware redesign required |
डिज़ाइन नोट्स
Use the manufacturer pin-description table to assign all 64 LQFP leads before routing the board. Keep analog audio outputs away from digital clock and data traces, preserve a continuous ground reference beneath the analog section, and route high-current returns directly to the appropriate power ground rather than through sensitive converter areas. This separation reduces coupling from digital switching activity into the low-level audio path.
Provide independent 2.7 V to 3.6 V analog and digital supply rails and place local bypass capacitors at the associated power pins. Star-route branch connections so converter current does not share narrow traces with digital logic. The analog PLL and audio conversion section are especially sensitive to supply disturbance, so validate the rail voltages at the device under worst-case loading and clock configuration.
Clock quality directly influences the low-jitter PLL's ability to recover stable timing from biphase-coded data or a dedicated word clock. Use short, continuous clock and data traces, avoid unnecessary stubs, and keep return paths continuous beneath the signals. Verify that the chosen oscillator arrangement operates correctly with each supported input mode, especially when the source clock and interface word clock originate from different domains.
Do not treat AK4118AEQ as a drop-in substitute. Its 48-LQFP package, 192 kHz maximum rate, and -10 °C to +70 °C range differ from the AK4115VQ's 64-LQFP package, 216 kHz capability, and -20 °C to +85 °C range. Moving between the devices requires a PCB layout change, pin-mapping review, and firmware adjustment rather than a simple BOM substitution.
अनुपालन जानकारी
The AK4115VQ is identified as ROHS3 compliant. No automotive qualification or separate REACH, lead-free, halogen-free, or conflict-minerals statement is shown.