ATF22LV10CQZ-30SU - 30ns 500-Gate PLD | Microchip Technology
MPN: ATF22LV10CQZ-30SU ✓ सक्रियATF22LV10CQZ-30SU अवलोकन
A simple programmable logic device, or SPLD, is a user-programmable semiconductor that replaces a collection of conventional AND, OR, and flip-flop logic gates. The ATF22LV10CQZ belongs to the broader programmable-logic-device hierarchy, combining nonvolatile configuration storage with combinational and registered logic functions. Its electrically erasable flash memory allows the programmed configuration to be retained and electrically updated during development or production.
The principal features of the ATF22LV10CQZ-30SU include a 30 ns speed grade, 500 logic gates, 10 macrocells, and operation from 3.0 V to 5.5 V. Edge-sensing zero-standby-power operation reduces current consumption when the power-down pin is asserted. The 24-pin SOIC package provides a surface-mount option for compact control, decoding, interface, and glue-logic designs while supporting both 3.3 V and 5 V systems.
Microchip describes the ATF22LV10CQZ family as a high-performance CMOS programmable logic device using proven electrically erasable flash memory. The family supports speeds down to 25 ns, while the ATF22LV10CQZ-30SU is the 30 ns ordering option. Its supply-voltage range accommodates industrial and commercial equipment, and its zero-power mode is useful in systems where the PLD must remain connected to an unpowered or minimally powered domain without continuous static drain current.
Typical uses include bus decoding, control-signal generation, state-machine implementation, peripheral interfacing, display sequencing, audio-system control, and compact industrial automation modules. In each case, the device consolidates multiple fixed-logic functions into one programmable package and can simplify a design when changing control logic would otherwise require a board respin. The ATF22LV10CQZ-30SU is also suitable for legacy product maintenance because its established architecture and SOIC footprint support targeted replacements in existing equipment.
Designers should account for setup and hold timing, output enable behavior, clock requirements, and the voltage tolerance of connected signals. Place decoupling capacitors close to the supply pins, preserve the recommended transition-time network, and use the power-down input only after confirming that all outputs will tolerate the resulting high-impedance state. Programming must follow the manufacturer’s device and programmer requirements to preserve the stored configuration reliably.
This product page organizes the ATF22LV10CQZ-30SU specifications, verified sourcing information, compatible ordering variants, and practical selection guidance into one engineering reference. It also distinguishes direct SOIC drop-in options from package-incompatible alternatives and identifies the operating details that must be confirmed before replacing an existing PLD in a live design.
के लिए ड्रॉप-इन विकल्प ATF22LV10CQZ-30SU — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATF22LV10CQZ-30SU (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Supply Voltage Range.
ATF22LV10CQZ-30SC
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ATF22LV10CQZ-30SI
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ATF22LV10CQZ-30XI
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ATF22LV10CQZ-30XU
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ATF22LV10CQZ-30SU Maximum Ratings और Electrical Characteristics
| Product Type | Simple programmable logic device (SPLD) |
| Logic Technology | High-performance CMOS electrically erasable flash-memory PLD |
| Propagation Delay | 30 ns |
| Equivalent Logic Gates | 500 gates |
| Macrocells | 10 macrocells |
| Number of I/O Pins | 10 I/O pins |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Power-Down Supply Current | 3 µA typical |
| Maximum Operating Frequency | 33.3 MHz |
| पैकेज | 24-pin SOIC |
| Package Type | Surface-mount SOIC |
| Delivery Packaging | Tube |
| Configuration Memory | Electrically erasable flash memory |
ATF22LV10CQZ-30SU surface-mount soic पिन कॉन्फ़िगरेशन गाइड
ATF22LV10CQZ-30SU (surface-mount soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATF22LV10CQZ-30SU.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ATF22LV10CQZ-30SU के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control Logic, Audio Interface Control, Interface and Bus Decoding, Display and System Sequencing, Automotive Accessory Control, Legacy Equipment Maintenance.
Industrial Control Logic
The ATF22LV10CQZ-30SU is useful for consolidating sequencing, interlock, and state-machine logic in industrial control modules. Its 10 macrocells and 500 equivalent gates provide enough configurable logic for compact command decoding and actuator-control functions, while the 30 ns propagation delay supports deterministic control paths. The 3.0 V to 5.5 V supply range allows operation from 24 V industrial systems through appropriate regulation. A 24-pin SOIC footprint simplifies board replacement in established control platforms. During implementation, verify input thresholds, clock timing, output behavior during power-down, and the exact temperature grade of the selected ordering suffix against the enclosure environment.
अनुशंसित
Audio Interface Control
The ATF22LV10CQZ-30SU can implement control logic for audio interfaces, monitor selectors, and digital routing systems. Its 10 I/O pins and 10 macrocells allow mode commands, mute sequences, and status decoding to be consolidated into a small programmable block without using multiple fixed logic devices. The 24-pin SOIC package is practical for compact audio boards, while the 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V signal environments. Validate the programmed output timing against the associated converter and interface requirements, and make sure the power-down sequence does not leave external audio-control inputs in an undefined state.
अनुशंसित
Interface and Bus Decoding
The ATF22LV10CQZ-30SU is suited to peripheral addressing, bus decode, chip-select generation, and command qualification in compact digital systems. Ten macrocells and 500 gates provide a practical capacity for decoding several control lines and generating deterministic responses. The 30 ns device speed is appropriate when the interface operates at moderate clock rates and logic timing margins can be verified. Its 24-pin SOIC footprint supports conventional surface-mount assembly. For dependable decoding, include the device’s input setup and hold requirements, test every programmed state, and avoid using slow power-down transitions as substitutes for explicit output-enable control where system state must remain predictable.
अनुशंसित
Display and System Sequencing
The ATF22LV10CQZ-30SU can implement display sequencing, indicator control, keypad scanning, and power-state logic within compact embedded systems. Its 10 I/O pins are suitable for coordinating multiple discrete control signals, while electrically erasable flash configuration allows control tables and state sequences to be revised without replacing the device. The 24-pin SOIC package provides a small surface-mount footprint, and operation from 3.0 V to 5.5 V supports common embedded rails. When driving displays or other external loads, confirm output drive capability and timing, respect the programming interface requirements, and include a defined startup state so that indicators do not behave unpredictably during power restoration.
अनुशंसित
Automotive Accessory Control
The ATF22LV10CQZ-30SU can be evaluated for non-safety-critical accessory, body, and switching-control functions in automotive electronics. The device provides 500 gates, 10 macrocells, and 10 I/O pins for consolidating relatively simple control logic, while its 3.0 V to 5.5 V operating range is compatible with regulated automotive electronics after appropriate power-network protection. The 24-pin SOIC package allows straightforward surface-mount assembly. Automotive use requires confirmation of the exact suffix qualification, temperature grade, transient tolerance, load dump behavior, and supplier documentation. It should not be assigned a safety-critical role unless the complete device and end application have the required approvals.
अनुशंसित
Legacy Equipment Maintenance
The ATF22LV10CQZ-30SU is well suited to maintaining older control and test equipment that used a 22V10 SPLD for decoding, sequencing, or interface glue logic. Its established 24-pin SOIC footprint, 10 macrocells, and electrically erasable flash configuration enable targeted board-level replacement without redesigning the surrounding logic. The 30 ns speed grade and 3.0 V to 5.5 V operating range match the operating requirements described for this device family. During repair, match the exact legacy MPN and suffix, preserve the programmed configuration file, and verify all timing and I/O behavior against the original schematic rather than assuming every 22V10 ordering variant is electrically identical.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ATF22LV10CQZ-30SU — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ATF22LV10CQZ-30SC | ATF22LV10CQZ-30SI | ATF22LV10CQZ-30XI | ATF22LV10CQZ-30XU |
|---|---|---|---|---|---|
| Package | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC | 24-SOIC |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Propagation Delay | 30 ns | 30 ns | 30 ns | 30 ns | 30 ns |
| Equivalent Logic Gates | 500 gates | 500 gates | 500 gates | 500 gates | 500 gates |
| Macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Number of I/O Pins | 10 I/O pins | 10 I/O pins | 10 I/O pins | 10 I/O pins | 10 I/O pins |
| Supply Voltage | 3.0 V to 5.5 V | 3.3 V/5 V | 3.3 V/5 V | 3.3 V/5 V | 3.3 V/5 V |
| Maximum Operating Frequency | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz | 33.3 MHz |
| Configuration Memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
| Zero Standby Current | 3 µA typical in power-down mode | 3 µA typical in power-down mode | 3 µA typical in power-down mode | 3 µA typical in power-down mode | 3 µA typical in power-down mode |
मुख्य विशेषताएँ
- Matches the core 22V10 resource and timing profile (बनामATF22LV10CQZ-30SC)
- Direct SOIC-footprint maintenance option (बनामATF22LV10CQZ-30SI)
- Low-power state supports portable and intermittently powered systems (बनामATF22LV10CQZ-30XI)
डिज़ाइन नोट्स
Use the manufacturer’s recommended power-decoupling arrangement and place the local bypass capacitor close to the device supply pins. The ATF22LV10CQZ family operates down to 3.0 V and includes an edge-sensing zero-power mode, but reliable low-voltage and power-down operation still depends on clean supply sequencing. Avoid long supply traces between the decoupling network and the PLD, and verify the voltage and temperature limits of the exact ordering suffix before energizing the circuit.
Do not treat every 22V10 ordering suffix as automatically interchangeable. The ATF22LV10CQZ-30SC, -30SI, -30XI, and -30XU variants share the cited 30 ns speed and 24-pin SOIC format, but suffix-specific temperature or qualification requirements still need confirmation. Check the ordering table, pin description, timing limits, and programming instructions in the Microchip datasheet. Preserve or recreate the original configuration file before production programming.
Validate setup and hold timing at every connected control or data input, including signals originating from long PCB routes or external connectors. The 30 ns propagation delay describes the logic-device speed grade but does not eliminate interconnect delay, skew, or clock-quality problems. Use a clean clock source where registered logic is required, constrain unused inputs to defined levels in the programmed design, and verify output behavior during power-down and output-enable transitions across the full system operating range.
The 24-pin SOIC footprint requires adequate spacing between adjacent packages for soldering and inspection. Route the programming and dedicated control connections according to the manufacturer’s pin table, and avoid long parallel paths beneath sensitive analog sections of the board. If the device replaces an older SPLD, compare land patterns, exposed lead geometry, pin-one orientation, and no-connect positions mechanically before committing the PCB layout. The electrical compatibility of a listed suffix does not by itself guarantee that every land pattern is identical.
अनुपालन जानकारी
No explicit compliance declarations were included in the manufacturer or distributor information for this exact MPN. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status using the current manufacturer product documentation and the exact ordering suffix.