Broadcom

BCM53001B0KFB - 400MHz MIPS Processor with DDR2 | Broadcom

MPN: BCM53001B0KFB ✓ सक्रिय
400 MHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |
डेटाशीट उपलब्ध नहीं डेटाशीट खोजें
विकल्प देखें

BCM53001B0KFB अवलोकन

The Broadcom BCM53001B0KFB is a single-core 32-bit MIPS processor operating at 400 MHz and integrating DDR2 memory, PCI Express, and RGMII Ethernet connectivity in one interface-focused system-on-chip. It is intended for embedded networking equipment that must combine local processing with external memory and multi-gigabit network connectivity in a single integrated design.

A system-on-chip processor integrates a processor core, memory interfaces, and dedicated I/O functions on one semiconductor device. The BCM53001B0KFB belongs to the interface-controller and network-processing device class, combining embedded computation with DDR2 memory access, PCI Express connectivity, and Reduced Gigabit Media Independent Interface signaling. These functions allow an embedded product to support local processing, external storage or memory, expansion buses, and Ethernet communication without requiring a separate processor for each function.

The 32-bit MIPS architecture provides a 32-bit processing environment suitable for embedded control, protocol handling, and network-device management. Its 400 MHz operating frequency establishes the device's primary performance figure. Integrated DDR2 support allows the system to use an external DDR2 memory subsystem, while PCI Express provides a high-speed expansion or host-facing interface. RGMII provides a standardized digital interface for connecting an Ethernet PHY and therefore supports integrated network equipment designs.

Combining DDR2, PCI Express, and RGMII in one processor can simplify board partitioning and reduce the number of separate interface controllers required around the main processor. The trade-off is that board design must carefully implement the memory and high-speed interfaces according to Broadcom's device documentation, including trace routing, decoupling, reference clocks, and signal-integrity requirements. The integrated interfaces also make this processor more appropriate for networking products than for general-purpose control-only designs.

Typical use cases include Ethernet bridges, routers, switches, residential gateways, industrial network interfaces, and other embedded systems that require simultaneous local processing and network connectivity. The RGMII interface can support an external Ethernet transceiver, while DDR2 accommodates working memory and PCI Express can support expansion, storage, or downstream connectivity according to the completed system architecture.

Power and signal integrity require particular attention because DDR2 and PCI Express edges are faster than general-purpose GPIO signals. Place decoupling capacitors at the supply pins, route clocks as controlled-impedance nets, keep high-speed traces short where possible, and provide solid return paths beneath signal routes. Confirm the exact pin assignments, voltage rails, clock requirements, and termination network in the manufacturer documentation before schematic capture.

This product page combines the BCM53001B0KFB core specifications with practical interface-planning guidance, sourcing information, and a selection framework. It emphasizes the relationships among the 400 MHz MIPS core, DDR2 memory, PCI Express, and RGMII so engineers can determine whether the device fits the intended networking architecture before committing a PCB design.

के लिए ड्रॉप-इन विकल्प BCM53001B0KFB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

BCM53001B0KFB Maximum Ratings और Electrical Characteristics

Manufacturer Broadcom
Processor Type Single-core MIPS processor
Processor Architecture 32-bit
Processor Clock Frequency 400 MHz
DDR Interface DDR2
PCI Express Support PCI Express interface
Ethernet Interface RGMII

BCM53001B0KFB standard पिन कॉन्फ़िगरेशन गाइड

BCM53001B0KFB (standard पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

BCM53001B0KFB के लिए standard पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: BCM53001B0KFB.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

BCM53001B0KFB के लिए उपयुक्त है 6 अनुप्रयोगs: Enterprise Network Bridges, Residential Gateway Platforms, Industrial Ethernet Gateways, PCIe-Enabled Network Appliances, Network Monitoring Equipment, Service and Edge Networking.

🌐

Enterprise Network Bridges

The BCM53001B0KFB fits network-bridge designs that require a 400 MHz MIPS core alongside DDR2 memory and RGMII Ethernet connectivity. The processor can manage forwarding policy, filtering, management functions, or protocol tasks while DDR2 provides working memory for packet structures and control data. RGMII connects the processor to an Ethernet PHY, and PCI Express can support an expansion component or additional high-speed connectivity. The principal design consideration is coordinating DDR2 timing, RGMII clock and data skew, and PCI Express routing while maintaining clean power rails.

🏠

Residential Gateway Platforms

The BCM53001B0KFB is suitable for a residential gateway that combines packet processing, management functions, local memory, and Ethernet connectivity. Its 32-bit MIPS processor runs at 400 MHz, while DDR2 supports larger working-memory configurations than a small embedded microcontroller. RGMII allows connection to a compatible Ethernet transceiver, and PCI Express can be used where the gateway architecture includes an expansion or high-speed storage interface. Deployment decisions should account for the exact DDR2 capacity, interface timing, package layout, and thermal environment.

🏭

Industrial Ethernet Gateways

The BCM53001B0KFB can support an industrial Ethernet gateway that combines protocol handling, local control, memory-intensive services, and network communication. The 400 MHz MIPS core is suited to real-time networking tasks, while DDR2 supplies external working memory and RGMII links the device to industrial Ethernet PHYs. PCI Express may support a high-speed expansion function depending on the selected board architecture. Industrial use requires verification of the exact temperature range, lifecycle commitment, environmental qualification, and compliance status before production release.

🖥️

PCIe-Enabled Network Appliances

The BCM53001B0KFB is appropriate for network appliances that need an embedded processor and PCI Express expansion in the same design. The processor can handle control-plane, management, filtering, or protocol functions, while DDR2 supplies main memory for the appliance. RGMII provides the Ethernet path to an external transceiver, and the PCIe interface can connect a compatible expansion device. Layout should use controlled-impedance routing for both high-speed interfaces and should verify power sequencing and reference-clock requirements before fabrication.

📡

Network Monitoring Equipment

The BCM53001B0KFB can be used in network-monitoring equipment where a local processor must support interface management, statistics collection, configuration processing, and Ethernet communication. Its 400 MHz operating frequency and 32-bit architecture provide a defined processing platform, while DDR2 accommodates larger monitoring data structures and RGMII connects the monitoring system to a network PHY. PCI Express offers a route to additional high-speed functions when required. Power integrity, DDR2 eye margin, and RGMII timing should be evaluated under the expected traffic and temperature conditions.

🔧

Service and Edge Networking

The BCM53001B0KFB can support an edge-networking product that combines control processing, memory access, Ethernet attachment, and optional high-speed expansion. Its integrated DDR2, PCI Express, and RGMII functions can reduce the component count associated with a discrete processor and interface-controller arrangement. The 400 MHz MIPS core is suited to management-plane tasks and protocol processing, while RGMII provides the path to an external transceiver. Final suitability depends on software requirements, interface timing, memory topology, board space, and the availability of the exact production configuration.

अनुशंसित उत्पादों का सारांश

BCM53001B0KFB Broadcom उपयोग में: Enterprise Network Bridges, Residential Gateway Platforms, Industrial Ethernet Gateways, PCIe-Enabled Network Appliances, Network Monitoring Equipment, Service and Edge Networking BCM53001B0KFBG Related orderable Broadcom device variant उपयोग में: Enterprise Network Bridges, Residential Gateway Platforms, Industrial Ethernet Gateways, PCIe-Enabled Network Appliances, Network Monitoring Equipment, Service and Edge Networking
What is the Broadcom BCM53001B0KFB?
The Broadcom BCM53001B0KFB is a single-core, 32-bit MIPS processor with a 400 MHz operating frequency and integrated DDR2, PCI Express, and RGMII interfaces. Broadcom's component description identifies the device as a networking-oriented processor that combines local processing with external memory, expansion, and Ethernet connectivity. Its architecture places the processor core and several high-speed I/O functions in one interface IC, reducing the need for separate controllers in suitable embedded networking products.
What are the key specifications of BCM53001B0KFB?
The BCM53001B0KFB combines a 32-bit MIPS processor core, a 400 MHz operating frequency, DDR2 memory support, PCI Express connectivity, and an RGMII Ethernet interface. These are the principal specifications associated with the device by Broadcom and its product listings. The DDR2 interface supports external working memory, PCI Express provides a high-speed expansion path, and RGMII connects the processor to an Ethernet transceiver for network equipment designs.
Where can I download the BCM53001B0KFB datasheet?
The BCM53001B0KFB datasheet should be obtained from Broadcom or through the datasheet archive link listed on this page. The manufacturer documentation is the authoritative source for the complete pinout, electrical characteristics, memory timing, clock requirements, and application circuit. Search the archive using BCM53001, then verify that the document describes the exact BCM53001B0KFB orderable device rather than only the broader BCM53001 family.
Where can I find the BCM53001B0KFB pinout?
The BCM53001B0KFB pinout is defined by the pin-description table in the Broadcom device documentation and must be checked before PCB layout. This page does not reproduce an unverified pin list because the package drawing and exact electrical assignments are required to prevent connection errors. Use the package drawing to confirm the physical footprint, then assign every power, ground, clock, DDR2, PCI Express, RGMII, and control signal exactly as shown in the manufacturer documentation.
Is the BCM53001B0KFB suitable for Ethernet equipment?
The BCM53001B0KFB is suitable for embedded Ethernet equipment that needs a 400 MHz MIPS processor, DDR2 memory, PCI Express, and RGMII in one device. RGMII provides the digital Ethernet interface to a compatible transceiver, while the processor core can handle device control, traffic management, or protocol tasks. Suitability still depends on the required port count, PHY architecture, memory size, timing, environmental rating, and system-level certification requirements.
What can replace the BCM53001B0KFB?
A direct replacement must provide the same package, pin assignments, processor interface behavior, DDR2 support, PCI Express implementation, and RGMII connectivity. No verified same-footprint replacement is established for the BCM53001B0KFB, so a substitute should not be selected from a generic cross-reference result alone. Use the Request a Quote form on this page to request the current device and engineering review of any proposed alternate before changing an existing design.
What is the best drop-in replacement for BCM53001B0KFB?
The best drop-in replacement is a device that is electrically and mechanically identical to the BCM53001B0KFB rather than merely a processor with similar clock speed. Compatibility must include the package, pinout, DDR2 interface, PCI Express interface, RGMII signals, power rails, reset behavior, and clock requirements. No five qualified alternatives can be confirmed from the available technical records, so Request a Quote support should be used to evaluate a specific replacement for an existing board.
BCM53001B0KFB vs BCM53001B0KFBG: which is the better choice?
The BCM53001B0KFBG is the closest identified orderable variant because both names share the BCM53001B0KFB device designation and appear in listings as related Broadcom components. The terminal suffix may represent a commercial or environmental packaging designation, but its exact meaning should be confirmed from Broadcom's ordering information. Do not assume interchangeability without checking the package, pinout, temperature grade, lifecycle status, and regulatory attributes.
When should I choose BCM53001B0KFB over a discrete interface-controller design?
Choose the BCM53001B0KFB when a design benefits from combining a 400 MHz 32-bit MIPS core with DDR2, PCI Express, and RGMII in one integrated device. It can simplify a network product that otherwise requires a separate processor and multiple interface controllers. Retain a discrete architecture when software separation, different interface implementations, supply-chain flexibility, or reuse of an existing processor platform is more important than board-level consolidation.
Is BCM53001B0KFB appropriate for an industrial router?
The BCM53001B0KFB can fit an industrial router architecture that requires local MIPS processing, DDR2 working memory, PCI Express expansion, and RGMII Ethernet connectivity. The 400 MHz core and integrated high-speed interfaces provide a focused platform for routing, management, or protocol functions. Industrial suitability must also be confirmed through the device's operating-temperature rating, longevity, qualification, supply status, and the enclosure and power-system requirements of the finished product.
What is the lead time for BCM53001B0KFB?
The current manufacturer and channel lead time for BCM53001B0KFB should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, production status, and supply allocation, so it should be treated as a quotation-specific value rather than a fixed catalog attribute. If production continuity is critical, request a scheduled delivery estimate and written confirmation before releasing the full build.
Is BCM53001B0KFB in stock?
Current BCM53001B0KFB inventory should be checked through the Request a Quote form on this page. The device is listed through multiple distribution channels, but a listing alone does not guarantee that a specific quantity is immediately available. Provide the required quantity, date code needs, target packaging, and delivery location with the request so the supply response reflects the actual manufacturing and distribution position.
How much does the BCM53001B0KFB cost?
The current BCM53001B0KFB price should be obtained through the Request a Quote form on this page. Pricing depends on quantity, date-code requirements, packaging, delivery terms, and current market conditions, so a single static value can become misleading. Submit the required order quantity and project cadence to receive a quotation that can be used consistently for budgeting and component planning.
Can BCM53001B0KFB support PCIe and DDR2 in the same design?
The BCM53001B0KFB is specifically identified with both DDR2 and PCI Express support, allowing one processor to interface with external memory and a high-speed expansion or host bus. Supporting both interfaces simultaneously requires correct power sequencing, clock generation, impedance-controlled routing, decoupling, and signal-integrity analysis. The manufacturer timing and layout guidance should be followed before finalizing component population or board-layer constraints.
What design constraints matter for the BCM53001B0KFB DDR2 and RGMII interfaces?
The BCM53001B0KFB requires careful treatment of its DDR2 and RGMII interfaces because both involve coordinated clocking, controlled-impedance signal routing, and defined return paths. Place memory decoupling close to the relevant supply pins, route clocks as short as practical, avoid unnecessary stubs, and maintain continuous reference planes beneath high-speed nets. Validate the final layout for DDR2 timing, RGMII skew, signal integrity, power integrity, and electromagnetic compatibility.
Is Broadcom BCM53001B0KFB RoHS compliant?
The RoHS status of the exact Broadcom BCM53001B0KFB orderable part must be confirmed from Broadcom's material-compliance declaration or product record. The related BCM53001B0KFBG suffix suggests a distinct ordering configuration, but regulatory status should not be inferred solely from the suffix. Request the current compliance statement for the exact MPN before using the component in a product that must satisfy EU RoHS requirements.

के लिए इंजीनियरिंग संदर्भ डेटा BCM53001B0KFB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the BCM53001B0KFB when an embedded network product needs a 400 MHz 32-bit MIPS core together with DDR2 memory, PCI Express, and RGMII connectivity. The integrated interfaces can simplify a board that would otherwise combine a general processor with separate networking and expansion controllers. It is especially relevant to bridges, gateways, appliances, and industrial Ethernet equipment whose software benefits from local protocol or traffic-management processing. The device is not a universal pin-compatible substitute for other MIPS processors: DDR2 organization, boot configuration, clocking, PHY implementation, PCIe requirements, package details, and environmental ratings must all match the original design. Because no confirmed same-footprint alternatives can be established for this exact orderable MPN, retaining the BCM53001B0KFB is the safest choice for an existing, proven PCB. For a new design, request current supply, configuration, lifecycle, and compliance information before finalizing the architecture.

डिज़ाइन नोट्स

Treat the DDR2, PCI Express, and RGMII interfaces as coordinated high-speed subsystems. Confirm reference-clock requirements, clock-to-data relationships, impedance targets, and allowed loading in the Broadcom hardware documentation. Keep routing free of unnecessary stubs, provide a continuous return path, and validate DDR2 eye timing, RGMII skew, and PCI Express edge quality with the completed board stack-up rather than relying only on schematic connectivity.

Define every supply rail and its allowable operating range before placing the BCM53001B0KFB in the schematic. Place decoupling capacitors close to the corresponding device pins, minimize loop area between each capacitor and its supply connection, and separate noisy switching or high-current return paths from the processor and interface reference planes. Confirm startup sequencing, current limits, and voltage tolerances against the manufacturer electrical requirements before releasing power to a prototype.

Plan the PCB around the relationship among the processor, DDR2 memory, external Ethernet transceiver, and any PCI Express endpoint. The memory interface generally requires short point-to-point routing, while RGMII and PCI Express require length-aware topology and controlled impedance. Check component placement for the external memory and PHY early in layout, preserve access to all configuration and test points, and run signal-integrity simulations with actual connectors, packages, and PCB materials.

Do not treat BCM53001B0KFB and BCM53001B0KFBG as interchangeable solely because their names are similar. Confirm the suffix meaning, package drawing, temperature grade, lead time, and regulatory status for the exact orderable MPN. A design that changes DDR2 organization, RGMII PHY mode, PCI Express configuration, clock source, or boot interface may require software and board changes even when the mechanical package appears unchanged.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The exact compliance declarations for BCM53001B0KFB require confirmation from Broadcom for the selected orderable configuration. AEC-Q100 status is not applicable because this is an embedded network processor rather than an automotive-qualified device.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

BCM53001B0KFB datasheet BCM53001B0KFB pinout BCM53001B0KFB datasheet pdf Broadcom BCM53001B0KFB BCM53001B0KFB specifications BCM53001B0KFB equivalent BCM53001B0KFB replacement BCM53001B0KFB cross reference BCM53001B0KFB price BCM53001B0KFB stock BCM53001 400MHz MIPS processor BCM53001 DDR2 PCIe RGMII BCM53001B0KFB vs BCM53001B0KFBG BCM53001B0KFB application circuit

संबंधित कंपोनेंट्स और शब्द

Broadcom BCM53001B0KFB BCM53001B0KFBG MIPS processor 32-bit architecture 400 MHz DDR2 memory PCI Express RGMII system-on-chip interface IC embedded processor network processor Ethernet transceiver reduced Gigabit Media Independent Interface semiconductor external memory network management industrial Ethernet embedded networking signal integrity power integrity RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें