Broadcom

BCM53283MIPBG - 16FE + 2GE Ethernet Controller | Broadcom

MPN: BCM53283MIPBG ✓ सक्रिय
न्यूनतम ऑर्डर मात्रा: 1 |

BCM53283MIPBG अवलोकन

The Broadcom BCM53283MIPBG is a highly integrated Ethernet controller combining 16 Fast Ethernet PHYs, 2 Gigabit Ethernet ports, GMII/RGMII interfaces, and an Intelligent Multi-port controller in one specialized interface IC. It consolidates multiple copper-Ethernet PHY functions and higher-speed uplink connectivity on a single device, reducing the number of separate network components required in multi-port embedded systems.

An Ethernet controller is an integrated circuit that connects a processor or switching system to physical Ethernet networks. It belongs to the hierarchy of networking semiconductor, interface IC, Ethernet controller, and system-on-chip. Integrated PHY functions convert physical network signaling into digital data, while GMII, RGMII, MII, and reduced MII interfaces connect the controller to a host processor, switch fabric, or other digital logic.

The BCM53283MIPBG provides 16 10/100 Fast Ethernet PHY ports alongside 2 Gigabit Ethernet ports. This mixed-speed arrangement supports endpoint, access, industrial, and embedded-network designs where many copper ports are needed for local devices while faster uplinks handle aggregation or backbone traffic. The integrated Intelligent Multi-port functionality adds controller-oriented hardware without requiring a separate Ethernet interface device for every port.

GMII and RGMII interfaces provide parallel or reduced-width data paths for the Gigabit Ethernet side, while MII and reduced MII interfaces support lower-speed host connectivity. These interface choices allow the device to serve as a central Ethernet aggregation point, provided the external processor interface, clocking, magnetics, reset circuitry, and physical-layer implementation meet the requirements described in the manufacturer documentation.

Typical applications include industrial Ethernet gateways, embedded routers, network appliances, service equipment, access controllers, and other multi-port systems that combine many Fast Ethernet links with dedicated Gigabit Ethernet connectivity. The device can reduce board area by consolidating repeated PHY functions, but its usefulness depends on matching the host interface, supported media, electrical characteristics, package, pinout, and thermal requirements of the target design.

Before layout, confirm the exact package dimensions, exposed-pad requirements, pin assignments, supported operating temperature range, clock sources, and reference-circuit recommendations in the manufacturer documentation. Ethernet designs also require careful separation between high-speed digital interfaces and sensitive analog PHY sections, plus controlled-length differential routing and suitable return paths through the PCB stack-up.

This page organizes the verified port configuration, interface options, sourcing information, application context, design considerations, and qualification status of the BCM53283MIPBG. It also distinguishes the target device from suffix or package variants that cannot be treated as drop-in replacements without additional engineering verification.

के लिए ड्रॉप-इन विकल्प BCM53283MIPBG — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

BCM53283MIPBG Maximum Ratings और Electrical Characteristics

Product Type Ethernet interface controller with integrated PHYs
Fast Ethernet PHY Ports 16 ports at 10/100 Mbps
Gigabit Ethernet Ports 2 ports at 10/100/1000 Mbps
Gigabit Ethernet Host Interfaces GMII and RGMII
Fast Ethernet Host Interfaces MII and reduced MII (RvMII)
Integrated Controller Function Intelligent Multi-port (IMP)
Total Integrated Ethernet Ports 18 ports
Maximum Data Rate 1000 Mbps per Gigabit Ethernet port
Fast Ethernet Data Rate 10 Mbps or 100 Mbps per Fast Ethernet port
RoHS स्थिति RoHS specialized interface classification

BCM53283MIPBG standard पिन कॉन्फ़िगरेशन गाइड

BCM53283MIPBG (standard पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

BCM53283MIPBG के लिए standard पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: BCM53283MIPBG.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

BCM53283MIPBG के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Gateway, Embedded Network Router, Service Equipment and Access Controller, Industrial Switch with Processor Uplink, Network Appliance with Mixed-Speed Ports, Automated Test and Measurement System.

🏭

Industrial Ethernet Gateway

The BCM53283MIPBG fits an industrial Ethernet gateway requiring many local copper connections and faster uplink capacity. Its 16 Fast Ethernet PHYs can connect sensors, machine controllers, panels, and service equipment at 10 or 100 Mbps, while the 2 Gigabit Ethernet ports provide dedicated paths toward a plant network or upstream controller. GMII/RGMII gives the host processor a structured digital interface, and MII/RvMII supports lower-speed connectivity where appropriate. The design must verify temperature range, isolation, surge requirements, magnetic components, grounding, and industrial lifecycle expectations before deployment.

🌐

Embedded Network Router

The BCM53283MIPBG can serve as the Ethernet concentration point in an embedded router that needs numerous Fast Ethernet LAN ports and Gigabit Ethernet uplinks. Sixteen integrated 10/100-Mbps PHYs reduce the number of discrete copper-interface devices, while the 2 Gigabit Ethernet ports can support aggregation toward a backbone or network processor. The host interface selection between GMII, RGMII, MII, and RvMII should follow the processor and signal-integrity requirements. Clocking, reset sequencing, magnetics, differential routing, and thermal performance require validation on the final PCB.

🖥️

Service Equipment and Access Controller

The BCM53283MIPBG is appropriate for access-control, service-node, and terminal equipment that must combine local Fast Ethernet links with higher-speed connectivity. The 16 integrated 10/100-Mbps PHYs can support management ports, service endpoints, or downstream devices, while the 2 Gigabit Ethernet ports provide uplink capacity for central equipment. The Intelligent Multi-port function adds dedicated controller hardware within the same device. Engineers should confirm media compatibility, initialization requirements, firmware integration, electromagnetic-emissions controls, and connector arrangements against the manufacturer documentation before layout release.

🔧

Industrial Switch with Processor Uplink

The BCM53283MIPBG can be evaluated for a processor-coupled industrial switching design that mixes legacy 10/100-Mbps devices with faster network segments. Sixteen Fast Ethernet ports provide broad edge connectivity, and the 2 Gigabit Ethernet ports can serve aggregation or processor-facing links. RGMII may reduce parallel data-path width compared with GMII, but both must be evaluated for clock quality, voltage levels, timing, and board-routing resources. Thermal performance, copper-magnetics selection, port isolation, and long-term availability should be addressed as part of an industrial design review.

📡

Network Appliance with Mixed-Speed Ports

The BCM53283MIPBG fits network appliances that need many 10/100-Mbps device connections plus dedicated gigabit paths. For example, a monitoring or communications appliance can use the 16 Fast Ethernet PHYs for local peripherals and the 2 Gigabit Ethernet ports for storage, backhaul, or management traffic. The integrated architecture can reduce board area compared with many separate PHY devices, although it also concentrates thermal and routing complexity. Validate the host processor interface, low-power behavior, Ethernet magnetics, enclosure heat dissipation, and regulatory performance with the complete system configuration.

🧰

Automated Test and Measurement System

The BCM53283MIPBG is suitable for automated test and measurement systems that require numerous instrument connections and fast data aggregation. The 16 Fast Ethernet ports can connect networked test controllers, sensors, fixtures, or service interfaces, while the 2 Gigabit Ethernet ports can carry higher-rate measurement or supervisory traffic. Using GMII or RGMII for the host connection allows the system architect to balance throughput against PCB signal count and routing complexity. Laboratory designs should verify synchronization, isolation, connector protection, grounding, enclosure thermal behavior, and long-duration stability before production.

What is the BCM53283MIPBG?
The BCM53283MIPBG is a Broadcom Ethernet interface controller integrating 16 Fast Ethernet PHYs, 2 Gigabit Ethernet ports, GMII/RGMII, MII/RvMII interfaces, and an Intelligent Multi-port controller. Its primary purpose is to consolidate many copper Ethernet connections into one multi-port networking device. The verified product description identifies it as an Interface - Specialized IC.
How many Ethernet ports does the BCM53283MIPBG provide?
The BCM53283MIPBG provides 18 integrated Ethernet ports in total: 16 Fast Ethernet ports operating at 10 or 100 Mbps and 2 Gigabit Ethernet ports operating at 10, 100, or 1000 Mbps. The mixed port count supports designs that need numerous local links plus faster aggregation or backbone connections.
Which host interfaces are available on the BCM53283MIPBG?
The BCM53283MIPBG supports GMII and RGMII for its Gigabit Ethernet connections and MII and reduced MII for lower-speed host connectivity. These interfaces connect the integrated Ethernet functions to a processor, switch fabric, or other digital controller. Exact signal timing and operating-mode requirements should be checked in the manufacturer documentation.
What is the difference between GMII and RGMII on the BCM53283MIPBG?
GMII is a wider parallel Gigabit Ethernet interface, while RGMII is its reduced-width, serialized alternative intended to conserve signal connections and PCB routing resources. The BCM53283MIPBG includes both interface options, subject to the operating modes and electrical requirements defined by Broadcom. The choice should follow the host processor interface and signal-integrity design.
Where can I download the BCM53283MIPBG datasheet PDF?
The BCM53283MIPBG datasheet PDF is available from the linked document source on this page. Before using the device, consult the manufacturer datasheet for the authoritative pin description, electrical characteristics, package drawing, timing diagrams, initialization sequence, and application circuit. The suffix MIPBG identifies a specific ordering configuration, so confirm its pin and package details before layout.
Where can I find the BCM53283MIPBG pinout?
The BCM53283MIPBG pinout is located in the pin-description section and package drawing of the manufacturer datasheet. The package designation and complete numbered pin list are not stated in the product records reviewed for this page, so no pin numbers should be inferred. Use the datasheet to map power, ground, Ethernet PHY, host-interface, clock, reset, and configuration signals.
Can the BCM53283MIPBG be used in an industrial Ethernet gateway?
Yes, the BCM53283MIPBG is architecturally suitable for industrial Ethernet gateways because it combines 16 Fast Ethernet PHYs with 2 Gigabit Ethernet ports and dedicated host interfaces. An industrial design must still verify the operating temperature range, electrical limits, isolation strategy, magnetic components, regulatory constraints, and long-term supply requirements before production release.
What is the BCM53283MIPBG used for in network equipment?
The BCM53283MIPBG is used to add many copper Ethernet connections to embedded routers, gateways, access equipment, and network appliances. Its 16 Fast Ethernet PHYs can serve local endpoints, while the 2 Gigabit Ethernet ports and GMII/RGMII paths support higher-speed links to a host or uplink. It reduces the need for separate PHY components when the board architecture is designed around the device.
What can replace the BCM53283MIPBG?
No verified drop-in replacement for the BCM53283MIPBG is established by the cross-reference information currently available. A true replacement must match the package, complete pinout, 16-plus-2 port arrangement, supported PHY functions, GMII/RGMII and MII/RvMII interfaces, electrical limits, clocking, and firmware requirements. Related BCM53283 suffix variants should not be treated as replacements without comparison of the ordering codes and datasheets.
Is the BCM53283MIPBG the same as BCM53283SKPBG?
The BCM53283SKPBG is a related Broadcom ordering code, but the available information does not establish that it is pin-to-pin or parametrically identical to the BCM53283MIPBG. The different suffix may encode package, temperature, qualification, or other ordering attributes. Compare the complete ordering tables and datasheets before treating it as a replacement.
When should I choose the BCM53283MIPBG over a discrete multi-PHY design?
Choose the BCM53283MIPBG when the design requires 16 integrated Fast Ethernet PHYs, 2 integrated Gigabit Ethernet ports, and the specified GMII/RGMII plus MII/RvMII host interfaces in one device. A discrete multi-PHY design may be preferable when the system needs a different port count, unsupported media, alternate package mechanics, or independently controlled interfaces. The architecture should be selected around complete system requirements rather than only port quantity.
Is the BCM53283MIPBG suitable for a router with multiple Fast Ethernet LAN ports?
The BCM53283MIPBG can suit a router requiring many Fast Ethernet LAN ports and dedicated Gigabit Ethernet uplinks. Its 16 10/100-Mbps PHYs and 2 10/100/1000-Mbps ports align with that topology, while GMII/RGMII provides host connectivity. The selected processor, switch fabric, package routing, thermal conditions, and external magnetics must support the complete design.
How does the BCM53283MIPBG compare with a generic Ethernet switch controller?
The BCM53283MIPFG is distinguished by integrating 16 Fast Ethernet PHYs and 2 Gigabit Ethernet ports together with GMII/RGMII, MII/RvMII, and Intelligent Multi-port functionality. A generic Ethernet switch controller may provide switching fabric without the same integrated copper-PHY arrangement. The correct comparison depends on port count, media support, host interface, package, and management requirements.
Where can I buy the BCM53283MIPBG and check its current lead time?
Use the Request a Quote form on this page to request the BCM53283MIPBG, current commercial terms, and the confirmed lead time. Stock status can change rapidly, so request an allocation for the exact ordering code and intended quantity. The 1,000-piece commercial reel and industrial temperature grade should be confirmed as part of the quotation.
What is the price of the BCM53283MIPBG?
The current commercial price for the BCM53283MIPBG should be obtained through the Request a Quote form on this page. Pricing depends on order quantity, reel quantity, contractual terms, and market conditions. The page separates structured commercial data from technical content so that the displayed quote remains tied to the exact Broadcom ordering code.
Is the BCM53283MIPBG in stock?
The BCM53283MIPBG is shown as purchasable and listed with inventory in current product records, but inventory levels are not permanent. Use the Request a Quote form to request current stock, scheduled delivery, and an allocation for the required quantity. Confirm the suffix, reel quantity, and temperature grade before accepting the quotation.
What are the key specifications of BCM53283MIPBG that engineers should know?
The key BCM53283MIPBG specifications are 16 integrated 10/100-Mbps Fast Ethernet PHY ports, 2 integrated 10/100/1000-Mbps Gigabit Ethernet ports, GMII/RGMII, MII/RvMII, and Intelligent Multi-port functionality. It is a Broadcom specialized Ethernet interface controller with a 1,000-piece commercial reel and an industrial temperature grade. Complete electrical and package data must be taken from the manufacturer datasheet.

के लिए इंजीनियरिंग संदर्भ डेटा BCM53283MIPBG — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

The BCM53283MIPBG is most suitable when an embedded network product needs 16 integrated 10/100-Mbps Fast Ethernet PHYs together with 2 Gigabit Ethernet ports, GMII/RGMII, MII/RvMII, and Intelligent Multi-port functionality in one controller. It can reduce component count and simplify multi-port Ethernet integration compared with a board assembled from many discrete PHY devices. Choose it when the host processor can support the selected digital interface and the complete electrical, package, thermal, firmware, and magnetics requirements can be met. Consider another architecture when the system needs a different port ratio, unsupported media type, an unrelated package, or independent PHY control. Do not select a related BCM53283 suffix solely from the base family name; verify the complete ordering code and pin compatibility. For industrial products, confirm temperature grade, lifecycle expectations, isolation, environmental protection, and supply planning as part of the design review.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Brand Broadcom
Product Type Ethernet interface controller with integrated PHYs
Fast Ethernet PHY Ports 16 ports at 10/100 Mbps
Gigabit Ethernet Ports 2 ports at 10/100/1000 Mbps
Total Integrated Ethernet Ports 18 ports
Gigabit Ethernet Host Interfaces GMII and RGMII
Fast Ethernet Host Interfaces MII and reduced MII (RvMII)
Integrated Controller Function Intelligent Multi-port (IMP)
Commercial Reel Quantity 1000 pieces

डिज़ाइन नोट्स

Separate the GMII and RGMII digital routing from the analog Ethernet PHY sections and external magnetics as far as the board stack-up permits. Use a continuous reference plane beneath high-speed interfaces, avoid stubs, provide matched-length routing where required, and follow the manufacturer’s recommended layer and component-placement guidance. Keep switching supplies and inductors away from sensitive PHY and magnetics areas.

GMII, RGMII, MII, and RvMII interfaces each impose different timing and routing constraints. Establish source-synchronous or clock-referenced timing requirements from the manufacturer datasheet, then calculate trace and component tolerances against those limits. Check external clock jitter, series damping, pull-up or pull-down values, and connector or package escape routing before releasing the high-speed nets.

Design distinct, low-impedance power distribution for the core and I/O domains identified in the manufacturer documentation. Place required bypass and bulk-decoupling capacitors close to their associated supply pins, verify the permitted voltage tolerance for every source, and use local ground-plane connections that limit return current beneath switching components. Do not infer core, I/O, or auxiliary voltage values from the Ethernet port speeds.

The BCM53283MIPBG combines 16 Fast Ethernet PHYs, 2 Gigabit Ethernet ports, digital host interfaces, and clocking within one specialized controller. Plan the placement around the shortest practical PHY-to-magnetics paths, maintain consistent channel geometry, and isolate transmit and receive routing where the reference design recommends it. Confirm exposed-pad, thermal, and package details from the datasheet before footprint creation.

Do not treat a related BCM53283 suffix as interchangeable without comparing the complete ordering code, package, temperature grade, pinout, and electrical limits. The BCM53283SKPBG is a separate ordering code and cannot be assumed to be a drop-in replacement. Likewise, confirm media support, auto-negotiation behavior, management firmware, and PHY test requirements against the exact manufacturing designation before schematic release.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The verified product classification identifies the BCM53283MIPBG as a RoHS specialized interface component. REACH, halogen-free, conflict-minerals, and detailed automotive qualification status are not stated.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

BCM53283MIPBG datasheet BCM53283MIPBG pinout BCM53283MIPBG datasheet pdf BCM53283MIPBG equivalent BCM53283MIPBG replacement BCM53283MIPBG cross reference BCM53283MIPBG price BCM53283MIPBG stock Broadcom BCM53283MIPBG BCM53283MIPBG package dimensions BCM53283MIPBG GMII RGMII BCM53283MIPBG industrial Ethernet gateway BCM53283MIPBG vs BCM53283SKPBG BCM53283MIPBG application circuit

संबंधित कंपोनेंट्स और शब्द

Broadcom BCM53283MIPBG BCM53283SKPBG Ethernet controller Ethernet interface IC Networking semiconductor Integrated PHY Fast Ethernet Gigabit Ethernet GMII RGMII MII Reduced MII Intelligent Multi-port controller 10 Mbps Ethernet 100 Mbps Fast Ethernet 1000 Mbps Gigabit Ethernet Industrial Ethernet gateway Embedded router Network appliance Ethernet switch controller Ethernet magnetics GMII timing RGMII routing Industrial temperature grade Tape and reel packaging
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें