C8051F813-GM - 25MHz 8-Bit Flash MCU | Silicon Labs
MPN: C8051F813-GM ✓ सक्रियC8051F813-GM अवलोकन
An 8-bit microcontroller is a programmable semiconductor that executes firmware from embedded Flash memory and operates peripherals around a central processing unit. The C8051F81x family belongs to the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. Its combination of digital control and analog or capacitive sensing functions allows one device to manage system logic and direct human-interface sensing.
The principal specifications include a 25 MHz maximum operating frequency, 8 KB of Flash program memory, 512 x 8 bits of RAM, a 10-bit ADC, and eight capacitive-touch channels. The device operates from a 1.8 V to 3.6 V supply range and is offered in a 20-pin QFN package measuring 4 x 4 mm. These features make it suitable for space-constrained embedded products that require more sensing capability than a basic digital-only controller.
The C8051 architecture provides a familiar 8051 instruction set and an integrated Flash-programming workflow. Eight KB of Flash is sufficient for compact control firmware, while the 10-bit ADC supports analog measurement with finer quantization than an 8-bit converter. The eight-channel capacitive-touch capability can reduce the number of separate touch-sensing components and simplify panel layouts when used with suitable electrodes and supporting firmware.
Typical uses include capacitive control panels, compact consumer interfaces, industrial controls, building controls, appliance user interfaces, and small sensor-hub products. In a capacitive-touch appliance, the MCU can scan touch electrodes, evaluate the ADC inputs, and manage machine functions from one low-voltage device. In an industrial controller, its mixed-signal resources can support analog inputs alongside digital control logic.
Board design should account for the QFN footprint, exposed thermal pad requirements, supply decoupling, and the short connection paths needed by sensitive analog and capacitive-sensing inputs. Confirm the complete pin assignments, exposed-pad connection, and recommended capacitor configuration in the manufacturer datasheet before routing the PCB or assigning a package symbol.
This product page consolidates the core device identity, verified electrical and memory characteristics, sourcing questions, and package considerations into an engineering-focused reference. It also distinguishes the target device from similarly named C8051F81x and C8051F38x products by comparing only characteristics that can be substantiated.
के लिए ड्रॉप-इन विकल्प C8051F813-GM — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंC8051F813-GM Maximum Ratings और Electrical Characteristics
| Product Type | 8-bit mixed-signal Flash microcontroller |
| CPU Architecture | 8051-compatible |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 25 MHz |
| Flash Memory | 8 KB (8K x 8 bits) |
| RAM | 512 x 8 bits (512 bytes) |
| ADC Resolution | 10 bits |
| Capacitive Touch Channels | 8 channels |
| Supply Voltage Range | 1.8 V to 3.6 V |
| पैकेज | 20-QFN (4 x 4 mm) |
| पिन काउंट | 20 pins |
| Series | C8051F81x |
| Programming Interface | In-system programming |
C8051F813-GM 20-qfn (4 x 4 mm) पिन कॉन्फ़िगरेशन गाइड
C8051F813-GM (20-qfn (4 x 4 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: C8051F813-GM.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
C8051F813-GM के लिए उपयुक्त है 6 अनुप्रयोगs: Capacitive Appliance Control Panel, Industrial Sensor Hub, Building Control Interface, Consumer Touch Remote, Compact Analog Measurement Controller, Battery-Powered Sensor Node.
Capacitive Appliance Control Panel
The C8051F813-GM fits compact appliance interfaces because it combines eight capacitive-touch channels with a 10-bit ADC and 25 MHz 8051-compatible core. It can scan touch electrodes, evaluate control inputs, and operate the appliance state machine without requiring a separate touch-controller device. Its 8 KB of Flash supports a focused user-interface and motor-control program, while 512 bytes of RAM provides working state for debouncing, indicator logic, and parameter handling. The 20-QFN 4 x 4 mm package also reduces board footprint compared with many larger controllers. Final electrode layout, scan timing, and EMI immunity should be validated with the manufacturer’s recommended touch-sensing practices.
Industrial Sensor Hub
The C8051F813-GM is suitable for a small industrial sensor hub that must combine digital control with limited analog measurement. Its 10-bit ADC can digitize sensor signals that do not require higher resolution, and the 25 MHz core provides sufficient processing speed for local filtering, status reporting, and control updates. With 8 KB of Flash and 512 bytes of RAM, the device fits compact firmware rather than large application stacks. The 1.8 V to 3.6 V supply range also supports low-voltage embedded platforms. Sensor excitation, channel count, calibration, and isolation requirements remain application-specific and should be checked against the final signal-chain design.
Building Control Interface
The C8051F813-GM can support low-voltage building-control interfaces that combine touch or analog adjustment inputs with local equipment control. Eight capacitive-touch channels can serve a compact panel, while the 10-bit ADC supports monitoring of slower-changing analog controls. The 8051-compatible processing environment and 8 KB of Flash are useful for dedicated controller firmware, including debounce logic, indicators, setpoints, and communications tasks. Its small 20-QFN 4 x 4 mm footprint helps when the controller must fit behind a glass fascia or within a compact wall-control enclosure. Production design should verify the exposed-pad connection, power filtering, and interface levels for the installation environment.
Consumer Touch Remote
A compact consumer remote is a natural application for the C8051F813-GM because eight capacitive-touch channels and a 10-bit ADC are integrated into the same controller. The device can implement touch detection, button-state management, and an application-specific output interface within the limits of its 8 KB Flash and 512-byte RAM. A 25 MHz core leaves room for organized firmware and low-latency user input, while the 4 x 4 mm QFN package helps meet enclosure-space requirements. Designers should account for the physical spacing of electrodes, grounding of conductive surfaces, and calibration across temperature and production tolerances. Wireless communication should be added only if its interface and power requirements are compatible with the selected system architecture.
Compact Analog Measurement Controller
The C8051F813-GM can serve as the controller for a small analog measurement system where 10-bit resolution is appropriate. The ADC, 25 MHz processing clock, and 512 bytes of RAM support acquisition sequencing, baseline compensation, threshold evaluation, and local status functions. Its 8 KB of Flash is best suited to a focused measurement algorithm rather than a large data pipeline or graphical application. The 1.8 V to 3.6 V operating range can simplify integration into low-voltage sensor equipment, although the reference, input range, and sampling characteristics must be matched to the measured signals. Use the manufacturer electrical-characteristics table to establish safe input limits and accuracy expectations.
Battery-Powered Sensor Node
The C8051F813-GM is suitable for a compact battery-powered sensor node when its active and low-power requirements fit the system budget. Its 25 MHz core can perform sensor conditioning and local decisions, while the integrated 10-bit ADC and capacitive-touch channels remove several discrete devices from a compact design. The 1.8 V to 3.6 V range permits operation from low-voltage energy-storage rails, but average current, sleep behavior, and startup time must be evaluated before sizing the battery. Flash retention and write behavior also matter for logs or configuration. Use the manufacturer datasheet for exact low-power parameters and avoid inferring them from the operating-frequency specification.
के लिए इंजीनियरिंग संदर्भ डेटा C8051F813-GM — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Brand | Silicon Labs |
| Package | 20-QFN (4 x 4 mm) |
| CPU Architecture | 8051-compatible 8-bit |
| Maximum Clock Frequency | 25 MHz |
| Flash Memory | 8 KB (8K x 8 bits) |
| RAM | 512 x 8 bits (512 bytes) |
| Supply Voltage Range | 1.8 V to 3.6 V |
| ADC Resolution | 10 bits |
| Capacitive Touch Channels | 8 channels |
| Programming | In-system programming |
मुख्य विशेषताएँ
- Integrated capacitive-touch sensing (बनामC8051F381-GM)
- Compact mixed-signal integration (बनामC8051F381-GM)
- Different performance tier for code-heavy designs (बनामC8051F381-GM)
डिज़ाइन नोट्स
Use the manufacturer’s 20-QFN land pattern and exposed-pad geometry rather than creating a symbol from the generic QFN-20 library. Confirm the pin-one orientation, pad dimensions, solder mask, and paste pattern against the package drawing. Place input and output decoupling capacitors close to their associated power pins, and connect the exposed pad according to the recommended PCB stack-up and thermal guidance.
Keep capacitive-touch traces short, symmetric, and isolated from switching nodes, antenna structures, and high-current paths. The eight touch channels are useful for compact electrodes, but their usable performance depends on electrode geometry, guard structures, panel construction, and firmware calibration. Prototype the physical interface early because changes to the enclosure or printed electrode can change the measured capacitance and require recalibration.
Do not treat every C8051F81x suffix as interchangeable without checking the ordering table. C8051F813-GM and C8051F813-GMR can denote different packaging or shipment configurations, while C8051F381-GM and C8051F381-GMR belong to a family with different memory and timing characteristics. Confirm the exact silicon part number, package suffix, tape orientation, and programmed-device requirements before production release.
Plan the 1.8 V to 3.6 V supply range around the exact rail used in the product. Verify regulator tolerance, startup behavior, ADC reference stability, and the voltage limits of connected I/O. Place bulk and high-frequency decoupling according to the manufacturer layout guidance, and avoid routing noisy switching-current paths through the analog and touch-sensing areas of the board.
अनुपालन जानकारी
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact C8051F813-GM ordering code. The related C8051F381-GM is described as AEC-Q100 qualified, but that qualification must not be transferred to the C8051F813-GM.