CY7C65631-56LTXC - 2-Port USB 2.0 Hub Controller | Infineon
MPN: CY7C65631-56LTXC ✓ सक्रियCY7C65631-56LTXC अवलोकन
A USB hub controller is an interface IC that manages one upstream USB connection and multiple downstream ports. It belongs to the USB interface-controller hierarchy, which sits between a USB host and connected peripherals while handling enumeration, signaling, power-gating coordination, and port status. The EZ-USB HX2LP family is designed for compact USB-to-serial, storage, communications, and embedded systems.
Key verified features include integrated upstream and downstream termination resistors, integrated port-status indicator control, and in-system EEPROM programming. A 24 MHz crystal supplies the reference required for USB timing, while the integrated PLL supports low-power hub operation. The controller operates from 3.3 V and uses a compact 56-QFN surface-mount package to support space-constrained equipment.
The part supports USB full-speed and high-speed operation according to distributor descriptions. Its integrated resistors can reduce external termination-component count, while indicator-control outputs can simplify implementation of port activity or power-status LEDs. In-system EEPROM programming adds configuration flexibility for firmware and hub descriptors, subject to the manufacturer's documented programming procedure.
Typical uses include USB storage adapters, embedded USB expansion systems, printer interfaces, industrial equipment, and compact host-powered or externally powered USB hubs. System designers must follow the manufacturer datasheet for clock layout, decoupling, port-power sequencing, exposed-pad thermal construction, and supported operating-temperature grades. The supplied search data specifically describes the C suffix as a commercial-temperature offering.
When designing the hub PCB, prioritize short controlled-routing USB traces, compliant power distribution, and the package's exposed-pad requirements. Validate downstream-port switching and current budgets under worst-case bus loads because controller selection alone does not determine system power. Confirm supply topology and USB attach behavior against the exact manufacturer documentation before production release.
This page consolidates verified manufacturer and distributor information with package, application, purchasing, and design guidance. It also clearly separates confirmed facts from parameters that require direct confirmation from the complete datasheet or distributor pricing records.
के लिए ड्रॉप-इन विकल्प CY7C65631-56LTXC — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं CY7C65631-56LTXC (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package Type, Package, EEPROM Support, Operating Temperature, Product Family.
CY7C65631-56LTXIT
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
CY7C65631-56LTXI
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →CY7C65630-56LTXC
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →CY7C65621-56LTXC
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →CY7C65631-56LTXCT
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
CY7C65631-56LTXC विशेषताएं
| Product Type | USB 2.0 hub controller |
| Product Family | EZ-USB HX2LP Lite low-power USB 2.0 hub controller |
| Number of USB Ports | 2 ports |
| Supported USB Speed | Full Speed and High Speed |
| सप्लाई वोल्टेज | 3.3 V |
| Clock Reference | 24 MHz external crystal |
| Phase-Locked Loop | Integrated PLL |
| Upstream Termination | Integrated resistor |
| Downstream Termination | Integrated resistor |
| Port Status Indicator Control | Integrated control |
| EEPROM Support | In-system EEPROM programming |
| ऑपरेटिंग तापमान | 0 C to 70 C |
| Package Type | QFN-56 |
| Package Dimensions | 8 mm x 8 mm |
| Package Height | 0.90 mm |
| Package Code | MO-220 |
| पिन काउंट | 56 pins |
| माउंटिंग प्रकार | Surface mount |
CY7C65631-56LTXC mo-220 पिन कॉन्फ़िगरेशन गाइड
CY7C65631-56LTXC (mo-220 पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: CY7C65631-56LTXC.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
CY7C65631-56LTXC के लिए उपयुक्त है 6 अनुप्रयोगs: Compact USB Storage Hub, Industrial USB Expansion Adapter, USB-to-Serial Multiport Adapter, Embedded USB Printer Interface, USB Connectivity Test Fixture, USB Security and Access Peripheral.
Compact USB Storage Hub
The CY7C65631-56LTXC fits a two-port USB storage hub because it provides full-speed and high-speed USB 2.0 operation from a 3.3 V supply and includes integrated upstream and downstream termination resistors. The controller can sit between a host USB connection and storage interfaces while port-status outputs support user-facing activity or power indicators. The 56-QFN footprint preserves board area compared with a larger line-and-bus controller. Design the downstream power path separately, validate current limits for each storage device, and follow the manufacturer clock, decoupling, impedance, and exposed-pad requirements. Its 0 C to 70 C range is appropriate for a commercial enclosure only when ambient conditions remain inside that range.
अनुशंसित
Industrial USB Expansion Adapter
The CY7C65631-56LTXC can manage two USB 2.0 downstream connections in an industrial adapter while operating from 3.3 V. Integrated termination resistors reduce the external resistor burden around the USB bus, while port-status indicator control supports operator-visible connection state. The device's verified commercial-temperature range of 0 C to 70 C makes the enclosure thermal environment an explicit requirement rather than an assumption. For industrial use, evaluate conducted EMI, ESD, ground continuity, and connector overvoltage protection at the board boundary. A separate robust power switch and protection design is still necessary because the hub controller does not by itself establish the downstream current budget.
अनुशंसित
USB-to-Serial Multiport Adapter
The two downstream ports of the CY7C65631-56LTXC can support a multiport USB-to-serial adapter when each interface device requires full-speed or high-speed USB 2.0 connectivity. The 3.3 V controller supply is compatible with modern embedded logic, and the integrated PLL works with the verified 24 MHz crystal reference. Indicator-control outputs can report attach or power conditions to LEDs or a system controller. The important design trade-off is power and signal integrity: keep each differential pair routed continuously over a controlled-impedance reference plane, place terminations exactly as required by the final USB topology, and verify hot-plug current steps with the chosen downstream power switches and cables.
अनुशंसित
Embedded USB Printer Interface
The CY7C65631-56LTXC is suitable for embedded equipment that needs one upstream USB link and up to two managed downstream ports. Full-speed and high-speed support aligns with legacy USB 2.0 printer or peripheral interfaces, while integrated port-status control can provide useful connection feedback without requiring every status signal to be decoded by additional glue logic. Because printer loads can produce transient current demand, the power subsystem needs independent soft-start and current validation. Keep the 24 MHz oscillator physically isolated from switching nodes, provide local 3.3 V decoupling, and follow the exact 56-QFN land pattern from Infineon before release.
अनुशंसित
USB Connectivity Test Fixture
The CY7C65631-56LTXC can form the logical center of a USB connectivity test fixture that exposes two downstream ports for programming, logging, or device validation. Its integrated upstream and downstream terminations may simplify the bus network, and port-status indicator control can drive fixture LEDs. The fixture designer should place test points without breaking USB impedance-controlled routing and should avoid long copper stubs immediately downstream of the connector. Use a stable 24 MHz crystal implementation and route the return plane continuously. The 0 C to 70 C operating range must be respected in the test enclosure, and current probes should confirm that each attached device remains within the selected power architecture.
अनुशंसित
USB Security and Access Peripheral
The CY7C65631-56LTXC can serve as the USB hub element in a compact security or access peripheral that needs a host connection plus two managed peripheral ports. Its 3.3 V operation and integrated termination functions simplify a small 56-QFN design, while indicator control can expose authorization or connection state through local LEDs. The controller does not implement the security policy itself; a companion microcontroller must manage enumeration, authentication, and downstream power authorization. Maintain uninterrupted USB return paths, provide ESD protection at externally accessible connectors, and verify whether bus-powered operation has enough current margin for both attached devices under worst-case simultaneous load.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा CY7C65631-56LTXC — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | CY7C65631-56LTXIT | CY7C65631-56LTXI | CY7C65630-56LTXC | CY7C65621-56LTXC | CY7C65631-56LTXCT |
|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | QFN-56, 8 mm x 8 mm | 56-pin QFN, same nominal package family | 56-pin QFN, same nominal package family | 56-QFN, 8 mm x 8 mm | 56-QFN family; exact dimensions not verified | 56-QFN family; exact dimensions not verified |
| USB Port Configuration | 2-port USB 2.0 hub | 4-port single-TT low-power hub controller | CY7C65631 family configuration; exact excerpt value not provided | USB 2.0 hub controller; exact port count not provided | EZ-USB HX2LP family member; exact port count not provided | EZ-USB HX2LP low-power hub controller; exact port count not provided |
मुख्य विशेषताएँ
- Two-port commercial-temperature configuration (बनामCY7C65631-56LTXIT)
- Broader temperature option in the nearby suffix variant (बनामCY7C65631-56LTXI)
- Integration reduces USB external termination parts (बनामCY7C65630-56LTXC)
डिज़ाइन नोट्स
Use the exact Infineon 56-QFN land pattern and exposed-pad construction from the package drawing; the supplied 56-pin footprint is not represented by a dedicated package-diagram asset in the available library. Route the USB differential pairs over a continuous reference plane with no branch stubs, maintain the intended impedance, and keep connector and protection-device paths away from the 24 MHz oscillator. The generic package image must not be used to infer manufacturing dimensions.
The controller is specified at 3.3 V, but USB hub power delivery also depends on the upstream source, power switches, fuse or current limiter, downstream connectors, and attached-device load. Confirm whether the product is powered from bus or an external supply, and validate simultaneous two-port current demand plus attach/detach transients. Do not infer downstream current capability from the controller's 3.3 V supply rating; use the complete hub power design and applicable USB limits.
Keep the 24 MHz crystal, load components, and controller clock pins in a compact cluster with a short ground return. Avoid routing switching-regulator high-current loops and USB connector transients beside this area. Although upstream and downstream termination resistors are integrated, USB pair geometry remains critical: preserve differential spacing, avoid plane splits under pairs, minimize vias, and test eye quality and enumeration across the intended cable lengths. EMI protection components should be placed at the connector boundary.
Do not substitute a family member solely because its package is also 56-QFN. The suffix can indicate temperature grade or shipping form, while a nearby MPN can use a different port topology such as the verified four-port single-TT CY7C65631-56LTXIT. Before substitution, compare every pin, USB data and power role, clock requirement, termination arrangement, exposed-pad connection, EEPROM interface, absolute maximum ratings, and operating-temperature grade against the manufacturer datasheets.
The verified commercial-temperature target is 0 C to 70 C. Estimated: envelope temperature rise equals estimated controller power dissipation multiplied by the assembled PCB thermal resistance; both inputs must be obtained from the final schematic and measured or characterized board because no power-dissipation or thermal-resistance value was supplied. Keep the exposed pad connected to a thermal copper plane according to the manufacturer drawing, but route USB power returns so thermal copper does not split high-speed signal return paths.
अनुपालन जानकारी
The supplied excerpts do not explicitly state compliance declarations. The C suffix is treated only as part of the exact ordering code and is not used as proof of lead-free, RoHS, REACH, or automotive qualification.
